lava-dispatcher, installed at version: 2023.10 start: 0 validate Start time: 2024-11-21 13:46:26.800533+00:00 (UTC) Validating that https://github.com/montjoie/lava-healthchecks-binary/blob/master/images/rootfs/buildroot/kci-2018.11/arm64/base/rootfs.cpio.gz?raw=true exists Validating that https://github.com/montjoie/lava-healthchecks-binary/blob/master/aglrefhw/Image?raw=true exists Validating that https://github.com/montjoie/lava-healthchecks-binary/blob/master/aglrefhw/r8a7795-agl-refhw--5.4.0+git0+289de10299-r1-h3ulcb-20201210131503.dtb?raw=true exists validate duration: 6.16 case: validate
case_id: 4089330
definition: lava
result: pass
start: 1 tftp-deploy (timeout 01:30:00) [common] start: 1.1 download-retry (timeout 01:30:00) [common] start: 1.1.1 http-download (timeout 01:30:00) [common] Not decompressing ramdisk as can be used compressed. downloading https://github.com/montjoie/lava-healthchecks-binary/blob/master/images/rootfs/buildroot/kci-2018.11/arm64/base/rootfs.cpio.gz?raw=true saving as /var/lib/lava/dispatcher/tmp/37672/tftp-deploy-2gk2b_se/ramdisk/rootfs.cpio.gz total size: 4145016 (3 MB) progress 0 % (0 MB) progress 5 % (0 MB) progress 10 % (0 MB) progress 15 % (0 MB) progress 20 % (0 MB) progress 25 % (1 MB) progress 30 % (1 MB) progress 35 % (1 MB) progress 40 % (1 MB) progress 45 % (1 MB) progress 50 % (2 MB) progress 55 % (2 MB) progress 60 % (2 MB) progress 65 % (2 MB) progress 70 % (2 MB) progress 75 % (2 MB) progress 80 % (3 MB) progress 85 % (3 MB) progress 90 % (3 MB) progress 95 % (3 MB) progress 100 % (3 MB) 3 MB downloaded in 0.77 s (5.10 MB/s) end: 1.1.1 http-download (duration 00:00:01) [common] case: http-download
case_id: 4089339
definition: lava
duration: 0.78
extra: ...
level: 1.1.1
namespace: common
result: pass
end: 1.1 download-retry (duration 00:00:01) [common] start: 1.2 download-retry (timeout 01:29:59) [common] start: 1.2.1 http-download (timeout 01:29:59) [common] downloading https://github.com/montjoie/lava-healthchecks-binary/blob/master/aglrefhw/Image?raw=true saving as /var/lib/lava/dispatcher/tmp/37672/tftp-deploy-2gk2b_se/kernel/Image total size: 31236608 (29 MB) No compression specified progress 0 % (0 MB) progress 5 % (1 MB) progress 10 % (3 MB) progress 15 % (4 MB) progress 20 % (5 MB) progress 25 % (7 MB) progress 30 % (8 MB) progress 35 % (10 MB) progress 40 % (11 MB) progress 45 % (13 MB) progress 50 % (14 MB) progress 55 % (16 MB) progress 60 % (17 MB) progress 65 % (19 MB) progress 70 % (20 MB) progress 75 % (22 MB) progress 80 % (23 MB) progress 85 % (25 MB) progress 90 % (26 MB) progress 95 % (28 MB) progress 100 % (29 MB) 29 MB downloaded in 6.50 s (4.58 MB/s) end: 1.2.1 http-download (duration 00:00:07) [common] case: http-download
case_id: 4089339
definition: lava
duration: 6.51
extra: ...
level: 1.2.1
namespace: common
result: pass
end: 1.2 download-retry (duration 00:00:07) [common] start: 1.3 download-retry (timeout 01:29:53) [common] start: 1.3.1 http-download (timeout 01:29:53) [common] downloading https://github.com/montjoie/lava-healthchecks-binary/blob/master/aglrefhw/r8a7795-agl-refhw--5.4.0+git0+289de10299-r1-h3ulcb-20201210131503.dtb?raw=true saving as /var/lib/lava/dispatcher/tmp/37672/tftp-deploy-2gk2b_se/dtb/r8a7795-agl-refhw--5.4.0+git0+289de10299-r1-h3ulcb-20201210131503.dtb total size: 81477 (0 MB) No compression specified progress 40 % (0 MB) progress 80 % (0 MB) progress 100 % (0 MB) 0 MB downloaded in 0.93 s (0.08 MB/s) end: 1.3.1 http-download (duration 00:00:01) [common] case: http-download
case_id: 4089339
definition: lava
duration: 0.93
extra: ...
level: 1.3.1
namespace: common
result: pass
end: 1.3 download-retry (duration 00:00:01) [common] start: 1.4 prepare-tftp-overlay (timeout 01:29:52) [common] start: 1.4.1 extract-nfsrootfs (timeout 01:29:52) [common] end: 1.4.1 extract-nfsrootfs (duration 00:00:00) [common] start: 1.4.2 lava-overlay (timeout 01:29:52) [common] [common] skipped lava-overlay - no test action. end: 1.4.2 lava-overlay (duration 00:00:00) [common] start: 1.4.3 extract-overlay-ramdisk (timeout 01:29:52) [common] end: 1.4.3 extract-overlay-ramdisk (duration 00:00:00) [common] start: 1.4.4 extract-modules (timeout 01:29:52) [common] end: 1.4.4 extract-modules (duration 00:00:00) [common] start: 1.4.5 apply-overlay-tftp (timeout 01:29:52) [common] end: 1.4.5 apply-overlay-tftp (duration 00:00:00) [common] start: 1.4.6 prepare-kernel (timeout 01:29:52) [common] start: 1.4.6.1 uboot-prepare-kernel (timeout 01:29:52) [common] end: 1.4.6.1 uboot-prepare-kernel (duration 00:00:00) [common] end: 1.4.6 prepare-kernel (duration 00:00:00) [common] start: 1.4.7 configure-preseed-file (timeout 01:29:52) [common] end: 1.4.7 configure-preseed-file (duration 00:00:00) [common] start: 1.4.8 compress-ramdisk (timeout 01:29:52) [common] Building ramdisk /var/lib/lava/dispatcher/tmp/37672/extract-overlay-ramdisk-98h4ye57/ramdisk.cpio containing /var/lib/lava/dispatcher/tmp/37672/extract-overlay-ramdisk-98h4ye57/ramdisk >> 26070 blocks Adding RAMdisk u-boot header. mkimage -A arm64 -T ramdisk -C none -d /var/lib/lava/dispatcher/tmp/37672/extract-overlay-ramdisk-98h4ye57/ramdisk.cpio.gz /var/lib/lava/dispatcher/tmp/37672/extract-overlay-ramdisk-98h4ye57/ramdisk.cpio.gz.uboot output: Image Name: output: Created: Thu Nov 21 13:46:42 2024 output: Image Type: AArch64 Linux RAMDisk Image (uncompressed) output: Data Size: 4199057 Bytes = 4100.64 KiB = 4.00 MiB output: Load Address: 00000000 output: Entry Point: 00000000 output: rename /var/lib/lava/dispatcher/tmp/37672/extract-overlay-ramdisk-98h4ye57/ramdisk.cpio.gz.uboot to /var/lib/lava/dispatcher/tmp/37672/tftp-deploy-2gk2b_se/ramdisk/ramdisk.cpio.gz.uboot end: 1.4.8 compress-ramdisk (duration 00:00:01) [common] end: 1.4 prepare-tftp-overlay (duration 00:00:01) [common] start: 1.5 lxc-create-udev-rule-action (timeout 01:29:50) [common] No LXC device requested end: 1.5 lxc-create-udev-rule-action (duration 00:00:00) [common] Checking files for TFTP limit of 4294967296 bytes. end: 1 tftp-deploy (duration 00:00:10) [common] start: 2 uboot-action (timeout 00:20:00) [common] start: 2.1 uboot-from-media (timeout 00:20:00) [common] end: 2.1 uboot-from-media (duration 00:00:00) [common] start: 2.2 bootloader-overlay (timeout 00:20:00) [common] substitutions: - {BOOTX}: booti 0x48080000 0x4c000000 0x48000000 - {DTB_ADDR}: 0x48000000 - {DTB}: 37672/tftp-deploy-2gk2b_se/dtb/r8a7795-agl-refhw--5.4.0+git0+289de10299-r1-h3ulcb-20201210131503.dtb - {INITRD}: 37672/tftp-deploy-2gk2b_se/ramdisk/ramdisk.cpio.gz.uboot - {KERNEL_ADDR}: 0x48080000 - {KERNEL}: 37672/tftp-deploy-2gk2b_se/kernel/Image - {LAVA_MAC}: None - {PRESEED_CONFIG}: None - {PRESEED_LOCAL}: None - {RAMDISK_ADDR}: 0x4c000000 - {RAMDISK}: 37672/tftp-deploy-2gk2b_se/ramdisk/ramdisk.cpio.gz.uboot - {ROOT_PART}: None - {ROOT}: None - {SERVER_IP}: 192.168.66.1 - {TEE_ADDR}: 0x83000000 - {TEE}: None Parsed boot commands: - setenv autoload no - setenv initrd_high 0xffffffff - setenv fdt_high 0xffffffff - dhcp - setenv serverip 192.168.66.1 - tftp 0x48080000 37672/tftp-deploy-2gk2b_se/kernel/Image - tftp 0x4c000000 37672/tftp-deploy-2gk2b_se/ramdisk/ramdisk.cpio.gz.uboot - setenv initrd_size ${filesize} - tftp 0x48000000 37672/tftp-deploy-2gk2b_se/dtb/r8a7795-agl-refhw--5.4.0+git0+289de10299-r1-h3ulcb-20201210131503.dtb - setenv bootargs 'console=ttySC0,115200n8 root=/dev/ram0 ip=dhcp' - booti 0x48080000 0x4c000000 0x48000000 end: 2.2 bootloader-overlay (duration 00:00:00) [common] case: bootloader-overlay
case_id: 4089340
definition: lava
duration: 0.00
extra: ...
level: 2.2
namespace: common
result: pass
start: 2.3 connect-device (timeout 00:20:00) [common] [common] connect-device Connecting to device using 'telnet 127.0.0.1 63004' Setting prompt string to ['lava-test: # '] end: 2.3 connect-device (duration 00:00:00) [common] start: 2.4 uboot-commands (timeout 00:20:00) [common] start: 2.4.1 reset-device (timeout 00:20:00) [common] start: 2.4.1.1 pdu-reboot (timeout 00:20:00) [common] Calling: '/usr/local/bin/acme-cli' '-s' '192.168.66.2' 'reset' '8' >> Success >> Success Returned 0 in 1 seconds end: 2.4.1.1 pdu-reboot (duration 00:00:01) [common] case: pdu-reboot
case_id: 4089361
definition: lava
duration: 1.30
extra: ...
level: 2.4.1.1
namespace: common
result: pass
end: 2.4.1 reset-device (duration 00:00:01) [common] start: 2.4.2 bootloader-interrupt (timeout 00:19:59) [common] Setting prompt string to ['Hit any key to stop autoboot'] bootloader-interrupt: Wait for prompt ['Hit any key to stop autoboot'] (timeout 00:20:00) Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. [ 0.000143] NOTICE: BL2: R-Car H3 Initial Program Loader(CA57) [ 0.004579] NOTICE: BL2: Initial Program Loader(Rev.2.0.6) [ 0.010112] NOTICE: BL2: PRR is R-Car H3 Ver.3.0 [ 0.014775] NOTICE: BL2: Board is unknown Rev.--- [ 0.019547] NOTICE: BL2: Boot device is eMMC(50MHz x8) [ 0.024715] NOTICE: BL2: LCM state is CM [ 0.028756] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53 [ 0.034732] NOTICE: BL2: CH0: 0x400000000 - 0x47fffffff, 2 GiB [ 0.040594] NOTICE: BL2: CH1: 0x500000000 - 0x57fffffff, 2 GiB [ 0.046469] NOTICE: BL2: CH2: 0x600000000 - 0x67fffffff, 2 GiB [ 0.052344] NOTICE: BL2: CH3: 0x700000000 - 0x77fffffff, 2 GiB [ 0.058261] NOTICE: BL2: DDR3200(rev.0.40) [ 0.073563] NOTICE: BL2: [COLD_BOOT] [ 0.083094] NOTICE: BL2: DRAM Split is 4ch(DDR f) [ 0.086393] NOTICE: BL2: QoS is default setting(rev.0.11) [ 0.091836] NOTICE: BL2: DRAM refresh interval 1.95 usec [ 0.097193] NOTICE: BL2: Periodic Write DQ Training [ 0.114688] NOTICE: BL2: v1.5(release):af9f429a-dirty [ 0.118332] NOTICE: BL2: Built : 02:23:33, Feb 7 2020 [ 0.123519] NOTICE: BL2: Normal boot [ 0.127155] NOTICE: BL2: eMMC boot from partition 1 [ 0.133702] NOTICE: BL2: Load dst=0xe6325100 src=(p:1)0x30000(384) len=0x200(1) [ 0.139819] NOTICE: BL2: Load dst=0x43f00000 src=(p:1)0x30400(386) len=0x1800(12) [ 0.147419] NOTICE: BL2: Load dst=0x44000000 src=(p:1)0x40000(512) len=0x10000(128) [ 0.156396] NOTICE: BL2: Load dst=0x44100000 src=(p:1)0x200000(4096) len=0x100000(2048) [ 0.187326] NOTICE: BL2: Load dst=0x50000000 src=(p:2)0x0(0) len=0x100000(2048) [ 0.216066] NOTICE: BL2: Booting BL31 U-Boot 2018.09 (May 10 2019 - 09:16:29 +0000) CPU: Renesas Electronics R8A7795 rev 3.0 Model: Renesas Salvator-XS board based on r8a7795 ES3.0+ with 8GiB (4 x 2 GiB) DRAM: 7.9 GiB Bank #0: 0x048000000 - 0x0bfffffff, 1.9 GiB Bank #1: 0x500000000 - 0x57fffffff, 2 GiB Bank #2: 0x600000000 - 0x67fffffff, 2 GiB Bank #3: 0x700000000 - 0x77fffffff, 2 GiB MMC: sd@ee100000: 0, sd@ee140000: 1, sd@ee160000: 2 Loading Environment from MMC... OK In: serial@e6e88000 Out: serial@e6e88000 Err: serial@e6e88000 Net: eth0: ethernet@e6800000 Hit any key to stop autoboot: 3 end: 2.4.2 bootloader-interrupt (duration 00:00:01) [common] start: 2.4.3 bootloader-commands (timeout 00:19:57) [common] Setting prompt string to ['=>'] bootloader-commands: Wait for prompt ['=>'] (timeout 00:19:57)  0 Setting prompt string to ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] setenv autoload no => setenv autoload no bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:57) setenv autoload no setenv initrd_high 0xffffffff => setenv initrd_high 0xffffffff bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:57) setenv initrd_high 0xffffffff setenv fdt_high 0xffffffff => setenv fdt_high 0xffffffff bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:57) setenv fdt_high 0xffffffff dhcp => dhcp bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:57) dhcp ethernet@e6800000 Waiting for PHY auto negotiation to complete....... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.66.11 (1255 ms) setenv serverip 192.168.66.1 => setenv serverip 192.168.66.1 bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:48) setenv serverip 192.168.66.1 tftp 0x48080000 37672/tftp-deploy-2gk2b_se/kernel/Image => tftp 0x48080000 37672/tftp-deploy-2gk2b_se/kernel/Image bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:48) tftp 0x48080000 37672/tftp-deploy-2gk2b_se/kernel/Image Using ethernet@e6800000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.11 Filename '37672/tftp-deploy-2gk2b_se/kernel/Image'. Load address: 0x48080000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################ 2 MiB/s done Bytes transferred = 31236608 (1dca200 hex) tftp 0x4c000000 37672/tftp-deploy-2gk2b_se/ramdisk/ramdisk.cpio.gz.uboot => tftp 0x4c000000 37672/tftp-deploy-2gk2b_se/ramdisk/ramdisk.cpio.gz.uboot bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:33) tftp 0x4c000000 37672/tftp-deploy-2gk2b_se/ramdisk/ramdisk.cpio.gz.uboot Using ethernet@e6800000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.11 Filename '37672/tftp-deploy-2gk2b_se/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4c000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################### 3 MiB/s done Bytes transferred = 4199121 (4012d1 hex) setenv initrd_size ${filesize} =>setenv initrd_size ${filesize} bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:32) setenv initrd_size ${filesize} tftp 0x48000000 37672/tftp-deploy-2gk2b_se/dtb/r8a7795-agl-refhw--5.4.0+git0+289de10299-r1-h3ulcb-20201210131503.dtb => tftp 0x48000000 37672/tftp-deploy-2gk2b_se/dtb/r8a7795-agl-refhw--5.4.0+git0+289de10299-r1-h3ulcb-20201210131503.dtb bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:32) tftp 0x48000000 37672/tftp-deploy-2gk2b_se/dtb/r8a7795-agl-refhw--5.4.0+git0+289de10299-r1-h3ulcb-20201210131503.dtb Using ethernet@e6800000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.11 Filename '37672/tftp-deploy-2gk2b_se/dtb/r8a7795-agl-refhw--5.4.0+git0+289de10299-r1-h3ulcb-20201210131503.dtb'. Load address: 0x48000000 Loading: *###### 2.7 MiB/s done Bytes transferred = 81477 (13e45 hex) setenv bootargs 'console=ttySC0,115200n8 root=/dev/ram0 ip=dhcp' => setenv bootargs 'console=ttySC0,115200n8 root=/dev/ram0 ip=dhcp' bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:31) setenv bootargs 'console=ttySC0,115200n8 root=/dev/ram0 ip=dhcp' booti 0x48080000 0x4c000000 0x48000000 => booti 0x48080000 0x4c000000 0x48000000 Setting prompt string to ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] bootloader-commands: Wait for prompt ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:31) booti 0x48080000 0x4c000000 0x48000000 ## Loading init Ramdisk from Legacy Image at 4c000000 ... Image Name: Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 4199057 Bytes = 4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Ramdisk to bfa03000, end bfe04291 ... OK Loading Device Tree to 00000000bf9ec000, end 00000000bfa02e44 ... OK Starting kernel ... end: 2.4.3 bootloader-commands (duration 00:00:26) [common] start: 2.4.4 auto-login-action (timeout 00:19:31) [common] Setting prompt string to ['Linux version [0-9]'] Setting prompt string to ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] auto-login-action: Wait for prompt ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:20:00) [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd073] [ 0.000000] Linux version 5.4.0-yocto-standard (oe-user@oe-host) (gcc version 9.3.0 (GCC)) #1 SMP PREEMPT Mon Jun 29 03:06:40 UTC 2020 [ 0.000000] Machine model: AGL Reference Hardware based on r8a7795 ES3.0+ with 8GiB (4 x 2 GiB) [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. start: 2.4.4.1 login-action (timeout 00:19:30) [common] The string '/ #' does not look like a typical prompt and could match status messages instead. Please check the job log files and use a prompt string which matches the actual prompt string more closely. Setting prompt string to [] Setting prompt string to ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing'] Using line separator: #'\n'# No login prompt set. Parsing kernel messages ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing', 'root@h3ulcb:~', 'h3ulcb:~#', '/ #', 'Login timed out', 'Login incorrect'] [login-action] Waiting for messages, (timeout 00:19:30) [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000057000000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node linux,adsp@57000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000058000000, size 384 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma@58000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000070000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,multimedia@70000000, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000048000000-0x000000077fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x77efe3800-0x77efe4fff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000048000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000077fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000048000000-0x0000000053ffffff] [ 0.000000] node 0: [mem 0x0000000057000000-0x00000000bfffffff] [ 0.000000] node 0: [mem 0x0000000500000000-0x000000057fffffff] [ 0.000000] node 0: [mem 0x0000000600000000-0x000000067fffffff] [ 0.000000] node 0: [mem 0x0000000700000000-0x000000077fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000048000000-0x000000077fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS resident on physical CPU 0x0 [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 31 pages/cpu s86744 r8192 d32040 u126976 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2020032 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttySC0,115200n8 root=/dev/ram0 ip=dhcp [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0xbb9ec000-0xbf9ec000] (64MB) [ 0.000000] Memory: 7274656K/8208384K available (14140K kernel code, 2472K rwdata, 7740K rodata, 6080K init, 493K bss, 261984K reserved, 671744K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f102f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x318/0x4ac with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec02923e, max_idle_ns: 440795202125 ns [ 0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255496ns [ 0.000135] Console: colour dummy device 80x25 [ 0.000204] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333) [ 0.000213] pid_max: default: 32768 minimum: 301 [ 0.000267] LSM: Security Framework initializing [ 0.000303] Smack: Initializing. [ 0.000306] Smack: IPv6 port labeling enabled. [ 0.000373] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000417] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.023955] ASID allocator initialised with 32768 entries [ 0.031945] rcu: Hierarchical SRCU implementation. [ 0.041230] Detected Renesas R-Car Gen3 r8a7795 ES3.0 [ 0.042846] EFI services will not be available. [ 0.047974] smp: Bringing up secondary CPUs ... [ 0.080191] Detected PIPT I-cache on CPU1 [ 0.080231] CPU1: Booted secondary processor 0x0000000001 [0x411fd073] [ 0.112193] Detected PIPT I-cache on CPU2 [ 0.112214] CPU2: Booted secondary processor 0x0000000002 [0x411fd073] [ 0.144230] Detected PIPT I-cache on CPU3 [ 0.144250] CPU3: Booted secondary processor 0x0000000003 [0x411fd073] [ 0.176282] CPU features: detected: ARM erratum 845719 [ 0.176294] Detected VIPT I-cache on CPU4 [ 0.176334] CPU4: Booted secondary processor 0x0000000100 [0x410fd034] [ 0.208313] Detected VIPT I-cache on CPU5 [ 0.208336] CPU5: Booted secondary processor 0x0000000101 [0x410fd034] [ 0.240360] Detected VIPT I-cache on CPU6 [ 0.240383] CPU6: Booted secondary processor 0x0000000102 [0x410fd034] [ 0.272387] Detected VIPT I-cache on CPU7 [ 0.272411] CPU7: Booted secondary processor 0x0000000103 [0x410fd034] [ 0.272488] smp: Brought up 1 node, 8 CPUs [ 0.272509] SMP: Total of 8 processors activated. [ 0.272514] CPU features: detected: 32-bit EL0 Support [ 0.272519] CPU features: detected: CRC32 instructions [ 0.282823] CPU: All CPU(s) started at EL2 [ 0.282854] alternatives: patching kernel code [ 0.283645] devtmpfs: initialized [ 0.290113] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290127] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.299694] pinctrl core: initialized pinctrl subsystem [ 0.301067] DMI not present or invalid. [ 0.301344] NET: Registered protocol family 16 [ 0.302144] DMA: preallocated 256 KiB pool for atomic allocations [ 0.302156] audit: initializing netlink subsys (disabled) [ 0.302286] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.304406] cpuidle: using governor menu [ 0.304614] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305720] Serial: AMBA PL011 UART driver [ 0.308381] sh-pfc e6060000.pin-controller: IRQ index 0 not found [ 0.308621] sh-pfc e6060000.pin-controller: r8a77951_pfc support registered [ 0.330874] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.330882] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.330887] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.330891] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.332674] cryptd: max_cpu_qlen set to 1000 [ 0.335474] ACPI: Interpreter disabled. [ 0.338418] rcar-avs: use avs value: 0 [ 0.338429] rcar-avs: cpu@0 is running with: opp_table0 [ 0.338435] rcar-avs: cpu@1 is running with: opp_table0 [ 0.338441] rcar-avs: cpu@2 is running with: opp_table0 [ 0.338448] rcar-avs: cpu@3 is running with: opp_table0 [ 0.338454] rcar-avs: gsx@fd000000 is running with: gsx_opp_table0 [ 0.339529] iommu: Default domain type: Translated [ 0.340004] ipmmu-vmsa e67b0000.mmu: IPMMU context 0 is reserved [ 0.340660] vgaarb: loaded [ 0.340872] SCSI subsystem initialized [ 0.341115] usbcore: registered new interface driver usbfs [ 0.341135] usbcore: registered new interface driver hub [ 0.341178] usbcore: registered new device driver usb [ 0.342149] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 400000 Hz [ 0.342443] mc: Linux media interface: v0.10 [ 0.342457] videodev: Linux video capture interface: v2.00 [ 0.342496] pps_core: LinuxPPS API ver. 1 registered [ 0.342500] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.342508] PTP clock support registered [ 0.342638] EDAC MC: Ver: 3.0.0 [ 0.343969] FPGA manager framework [ 0.344015] Advanced Linux Sound Architecture Driver Initialized. [ 0.344293] NetLabel: Initializing [ 0.344298] NetLabel: domain hash size = 128 [ 0.344301] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.344338] NetLabel: unlabeled traffic allowed by default [ 0.344692] clocksource: Switched to clocksource arch_sys_counter [ 0.663354] VFS: Disk quotas dquot_6.6.0 [ 0.663403] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.663552] pnp: PnP ACPI: disabled [ 0.667204] thermal_sys: Registered thermal governor 'power_allocator' [ 0.667996] NET: Registered protocol family 2 [ 0.668255] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.668317] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.668598] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.669207] TCP: Hash tables configured (established 65536 bind 65536) [ 0.669338] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.669444] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.669671] NET: Registered protocol family 1 [ 0.670046] RPC: Registered named UNIX socket transport module. [ 0.670053] RPC: Registered udp transport module. [ 0.670056] RPC: Registered tcp transport module. [ 0.670059] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.670071] PCI: CLS 0 bytes, default 64 [ 0.670184] Trying to unpack rootfs image as initramfs... [ 0.809097] Freeing initrd memory: 4100K [ 0.809924] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.810175] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available [ 0.810612] kvm [1]: IPA Size Limit: 40bits [ 0.811137] kvm [1]: vgic interrupt IRQ1 [ 0.811289] kvm [1]: Hyp mode initialized successfully [ 0.842517] Initialise system trusted keyrings [ 0.842628] workingset: timestamp_bits=44 max_order=21 bucket_order=0 [ 0.845924] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.846350] NFS: Registering the id_resolver key type [ 0.846367] Key type id_resolver registered [ 0.846370] Key type id_legacy registered [ 0.846379] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.846521] 9p: Installing v9fs 9p2000 file system support [ 0.857480] Key type asymmetric registered [ 0.857487] Asymmetric key parser 'x509' registered [ 0.857522] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.857528] io scheduler mq-deadline registered [ 0.857533] io scheduler kyber registered [ 0.870258] gpio_rcar e6050000.gpio: driving 16 GPIOs [ 0.870475] gpio_rcar e6051000.gpio: driving 29 GPIOs [ 0.870672] gpio_rcar e6052000.gpio: driving 15 GPIOs [ 0.870865] gpio_rcar e6053000.gpio: driving 16 GPIOs [ 0.871053] gpio_rcar e6054000.gpio: driving 18 GPIOs [ 0.871245] gpio_rcar e6055000.gpio: driving 26 GPIOs [ 0.871433] gpio_rcar e6055400.gpio: driving 32 GPIOs [ 0.871614] gpio_rcar e6055800.gpio: driving 4 GPIOs [ 0.873307] rcar-pcie fe000000.pcie: host bridge /soc/pcie@fe000000 ranges: [ 0.873332] rcar-pcie fe000000.pcie: IO 0xfe100000..0xfe1fffff -> 0x00000000 [ 0.873348] rcar-pcie fe000000.pcie: MEM 0xfe200000..0xfe3fffff -> 0xfe200000 [ 0.873362] rcar-pcie fe000000.pcie: MEM 0x30000000..0x37ffffff -> 0x30000000 [ 0.873372] rcar-pcie fe000000.pcie: MEM 0x38000000..0x3fffffff -> 0x38000000 [ 0.940353] rcar-pcie fe000000.pcie: PCIe link down [ 0.940490] rcar-pcie ee800000.pcie: host bridge /soc/pcie@ee800000 ranges: [ 0.940508] rcar-pcie ee800000.pcie: IO 0xee900000..0xee9fffff -> 0x00000000 [ 0.940523] rcar-pcie ee800000.pcie: MEM 0xeea00000..0xeebfffff -> 0xeea00000 [ 0.940536] rcar-pcie ee800000.pcie: MEM 0xc0000000..0xc7ffffff -> 0xc0000000 [ 0.940545] rcar-pcie ee800000.pcie: MEM 0xc8000000..0xcfffffff -> 0xc8000000 [ 1.004319] rcar-pcie ee800000.pcie: PCIe link down [ 1.006387] EINJ: ACPI disabled. [ 1.030222] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.032248] SuperH (H)SCI(F) driver initialized [ 1.032599] e6540000.serial: ttySC4 at MMIO 0xe6540000 (irq = 37, base_baud = 0) is a hscif [ 1.033027] e6550000.serial: ttySC3 at MMIO 0xe6550000 (irq = 38, base_baud = 0) is a hscif [ 1.033246] sh-pfc e6060000.pin-controller: pin GP_6_26 already requested by ee0a0200.usb-phy; cannot claim for e6560000.serial [ 1.033252] sh-pfc e6060000.pin-controller: pin-218 (e6560000.serial) status -22 [ 1.033258] sh-pfc e6060000.pin-controller: could not request pin 218 (GP_6_26) from group hscif2_data_c on device sh-pfc [ 1.033264] sh-sci e6560000.serial: Error applying setting, reverse things back [ 1.033275] sh-sci: probe of e6560000.serial failed with error -22 [ 1.033506] e6e68000.serial: ttySC1 at MMIO 0xe6e68000 (irq = 127, base_baud = 0) is a scif [ 1.033849] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 128, base_baud = 0) is a scif [ 2.233082] printk: console [ttySC0] enabled [ 2.237656] e6f30000.serial: ttySC2 at MMIO 0xe6f30000 (irq = 129, base_baud = 0) is a scif [ 2.246773] msm_serial: driver initialized [ 2.253786] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.260372] [drm] No driver support for vblank timestamp query. [ 2.266675] rcar-dw-hdmi fead0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.276543] rcar-dw-hdmi fead0000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.284556] rcar-dw-hdmi feae0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.294341] rcar-dw-hdmi feae0000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.307806] brd: module loaded [ 2.316261] loop: module loaded [ 2.394809] libphy: Fixed MDIO Bus: probed [ 2.399034] tun: Universal TUN/TAP device driver, 1.6 [ 2.404970] thunder_xcv, ver 1.0 [ 2.408194] thunder_bgx, ver 1.0 [ 2.411425] nicpf, ver 1.0 [ 2.414774] hclge is initializing [ 2.418075] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.425259] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.430578] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.436382] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.442294] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k [ 2.449222] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.454784] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 2.462575] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 2.468840] sky2: driver version 1.30 [ 2.473204] libphy: ravb_mii: probed [ 2.479317] ravb e6800000.ethernet eth0: Base address at 0xe6800000, 00:80:45:1b:40:7f, IRQ 122. [ 2.489073] VFIO - User Level meta-driver version: 0.3 [ 2.495758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.502267] ehci-pci: EHCI PCI platform driver [ 2.506710] ehci-platform: EHCI generic platform driver [ 2.536756] ehci-platform ee080100.usb: EHCI Host Controller [ 2.542407] ehci-platform ee080100.usb: new USB bus registered, assigned bus number 1 [ 2.550273] ehci-platform ee080100.usb: irq 175, io mem 0xee080100 [ 2.568699] ehci-platform ee080100.usb: USB 2.0 started, EHCI 1.10 [ 2.575194] hub 1-0:1.0: USB hub found [ 2.578942] hub 1-0:1.0: 1 port detected [ 2.583124] ehci-platform ee0a0100.usb: EHCI Host Controller [ 2.588766] ehci-platform ee0a0100.usb: new USB bus registered, assigned bus number 2 [ 2.596609] ehci-platform ee0a0100.usb: irq 176, io mem 0xee0a0100 [ 2.616702] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10 [ 2.623114] hub 2-0:1.0: USB hub found [ 2.626859] hub 2-0:1.0: 1 port detected [ 2.631007] ehci-platform ee0c0100.usb: EHCI Host Controller [ 2.636648] ehci-platform ee0c0100.usb: new USB bus registered, assigned bus number 3 [ 2.644485] ehci-platform ee0c0100.usb: irq 177, io mem 0xee0c0100 [ 2.664701] ehci-platform ee0c0100.usb: USB 2.0 started, EHCI 1.10 [ 2.671095] hub 3-0:1.0: USB hub found [ 2.674839] hub 3-0:1.0: 1 port detected [ 2.704737] ehci-platform ee0e0100.usb: EHCI Host Controller [ 2.710379] ehci-platform ee0e0100.usb: new USB bus registered, assigned bus number 4 [ 2.718209] ehci-platform ee0e0100.usb: irq 178, io mem 0xee0e0100 [ 2.736694] ehci-platform ee0e0100.usb: USB 2.0 started, EHCI 1.10 [ 2.743090] hub 4-0:1.0: USB hub found [ 2.746843] hub 4-0:1.0: 1 port detected [ 2.750999] ehci-orion: EHCI orion driver [ 2.755205] ehci-exynos: EHCI EXYNOS driver [ 2.759469] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.765634] ohci-pci: OHCI PCI platform driver [ 2.770100] ohci-platform: OHCI generic platform driver [ 2.775459] ohci-platform ee080000.usb: Generic Platform OHCI controller [ 2.782142] ohci-platform ee080000.usb: new USB bus registered, assigned bus number 5 [ 2.789976] ohci-platform ee080000.usb: irq 175, io mem 0xee080000 [ 2.883688] hub 5-0:1.0: USB hub found [ 2.887435] hub 5-0:1.0: 1 port detected [ 2.891550] ohci-platform ee0a0000.usb: Generic Platform OHCI controller [ 2.898229] ohci-platform ee0a0000.usb: new USB bus registered, assigned bus number 6 [ 2.906057] ohci-platform ee0a0000.usb: irq 176, io mem 0xee0a0000 [ 2.999655] hub 6-0:1.0: USB hub found [ 3.003404] hub 6-0:1.0: 1 port detected [ 3.007516] ohci-platform ee0c0000.usb: Generic Platform OHCI controller [ 3.014192] ohci-platform ee0c0000.usb: new USB bus registered, assigned bus number 7 [ 3.022027] ohci-platform ee0c0000.usb: irq 177, io mem 0xee0c0000 [ 3.115670] hub 7-0:1.0: USB hub found [ 3.119414] hub 7-0:1.0: 1 port detected [ 3.123527] ohci-platform ee0e0000.usb: Generic Platform OHCI controller [ 3.130205] ohci-platform ee0e0000.usb: new USB bus registered, assigned bus number 8 [ 3.138031] ohci-platform ee0e0000.usb: irq 178, io mem 0xee0e0000 [ 3.231640] hub 8-0:1.0: USB hub found [ 3.235387] hub 8-0:1.0: 1 port detected [ 3.239528] ohci-exynos: OHCI EXYNOS driver [ 3.244275] xhci-hcd ee000000.usb: xHCI Host Controller [ 3.249485] xhci-hcd ee000000.usb: new USB bus registered, assigned bus number 9 [ 3.272705] xhci-hcd ee000000.usb: hcc params 0x014051ce hci version 0x100 quirks 0x0000000000830410 [ 3.281817] xhci-hcd ee000000.usb: irq 173, io mem 0xee000000 [ 3.287931] hub 9-0:1.0: USB hub found [ 3.291679] hub 9-0:1.0: 1 port detected [ 3.295720] xhci-hcd ee000000.usb: xHCI Host Controller [ 3.300927] xhci-hcd ee000000.usb: new USB bus registered, assigned bus number 10 [ 3.308376] xhci-hcd ee000000.usb: Host supports USB 3.0 SuperSpeed [ 3.314651] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.323045] hub 10-0:1.0: USB hub found [ 3.326877] hub 10-0:1.0: 1 port detected [ 3.331442] usbcore: registered new interface driver usb-storage [ 3.337475] usbcore: registered new interface driver usbserial_generic [ 3.343990] usbserial: USB Serial support registered for generic [ 3.351482] renesas_usbhs e6590000.usb: no transceiver found [ 3.357190] renesas_usbhs e6590000.usb: gadget probed [ 3.362368] renesas_usbhs e6590000.usb: probed [ 3.366957] renesas_usbhs e659c000.usb: no transceiver found [ 3.372644] renesas_usbhs e659c000.usb: gadget probed [ 3.377809] renesas_usbhs e659c000.usb: probed [ 3.383026] renesas_usb3 ee020000.usb: probed with phy [ 3.390150] i2c /dev entries driver [ 3.402846] cs2000-cp 2-004f: revision - C1 [ 3.407056] i2c-rcar e6510000.i2c: probed [ 3.411445] i2c-rcar e66d0000.i2c: probed [ 3.417412] i2c-rcar e66d8000.i2c: probed [ 3.421786] i2c-rcar e66e0000.i2c: probed [ 3.426330] usbcore: registered new interface driver i2c-tiny-usb [ 3.432800] adv748x 2-0070: Endpoint /soc/i2c@e6510000/video-receiver@70/port@8/endpoint on port 8 [ 3.441722] adv748x 2-0070: Endpoint /soc/i2c@e6510000/video-receiver@70/port@a/endpoint on port 10 [ 3.451867] adv748x 2-0070: chip found @ 0xe0 revision 2143 [ 3.476811] random: fast init done [ 3.550217] adv748x 2-0071: Endpoint /soc/i2c@e6510000/video-receiver@71/port@8/endpoint on port 8 [ 3.559145] adv748x 2-0071: Endpoint /soc/i2c@e6510000/video-receiver@71/port@a/endpoint on port 10 [ 3.569298] adv748x 2-0071: chip found @ 0xe2 revision 2143 [ 3.628702] usb 9-1: new high-speed USB device number 2 using xhci-hcd [ 3.667420] rcar-csi2 feaa0000.csi2: 4 lanes found [ 3.672377] rcar-csi2 feab0000.csi2: 4 lanes found [ 3.680633] rcar-vin e6ef0000.video: Device registered as video0 [ 3.686683] rcar-vin e6ef1000.video: Device registered as video1 [ 3.692749] rcar-vin e6ef2000.video: Device registered as video2 [ 3.698783] rcar-vin e6ef3000.video: Device registered as video3 [ 3.704836] rcar-vin e6ef4000.video: Device registered as video4 [ 3.710873] rcar-vin e6ef5000.video: Device registered as video5 [ 3.716909] rcar-vin e6ef6000.video: Device registered as video6 [ 3.722981] rcar-vin e6ef7000.video: Device registered as video7 [ 3.731070] rcar_gen3_thermal e6198000.thermal: is using pseudo fixed FUSE values [ 3.743359] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 1 trip points [ 3.754534] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 1 trip points [ 3.765646] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 3 trip points [ 3.776107] sdhci: Secure Digital Host Controller Interface driver [ 3.782266] sdhci: Copyright(c) Pierre Ossman [ 3.787690] renesas_sdhi_internal_dmac ee140000.sd: Using IPMMU context 1 [ 3.794455] renesas_sdhi_internal_dmac ee140000.sd: Adding to iommu group 0 [ 3.850117] renesas_sdhi_internal_dmac ee140000.sd: mmc0 base at 0xee140000 max clock rate 200 MHz [ 3.859861] Synopsys Designware Multimedia Card Interface Driver [ 3.866886] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.874851] ledtrig-cpu: registered to indicate activity on CPUs [ 3.882068] usbcore: registered new interface driver usbhid [ 3.887637] usbhid: USB HID core driver [ 3.893202] irq: type mismatch, failed to map hwirq-39 for interrupt-controller@f1010000! [ 3.955823] mmc0: new HS400 MMC card at address 0001 [ 3.961444] mmcblk0: mmc0:0001 CJUD4R 59.6 GiB [ 3.966340] mmcblk0boot0: mmc0:0001 CJUD4R partition 1 31.9 MiB [ 3.972612] mmcblk0boot1: mmc0:0001 CJUD4R partition 2 31.9 MiB [ 3.978808] mmcblk0rpmb: mmc0:0001 CJUD4R partition 3 4.00 MiB, chardev (234:0) [ 3.988139] mmcblk0: p1 p2 [ 4.026418] optee: probing for conduit method from DT. [ 4.031558] optee: revision 3.1 (19fb6dcb) [ 4.032091] optee driver R-Car Rev.1.0.11 [ 4.040468] optee: initialized driver [ 4.044467] usbcore: registered new interface driver snd-usb-audio [ 4.060736] rcar_sound ec500000.sound: probed [ 4.065302] drop_monitor: Initializing network drop monitor service [ 4.071677] NET: Registered protocol family 17 [ 4.076216] 9pnet: Installing 9P2000 support [ 4.080505] Key type dns_resolver registered [ 4.085131] registered taskstats version 1 [ 4.089215] Loading compiled-in X.509 certificates [ 4.104451] thermal emergency: set temperature to 110 celsius [ 4.110361] thermal emergency: shutdown target cpus 1-7 [ 4.115562] thermal emergency: freq scaled target cpus 0 [ 4.121203] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs [ 4.129658] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.136249] [drm] No driver support for vblank timestamp query. [ 4.143099] [drm] Initialized rcar-du 1.0.0 20130110 for feb00000.display on minor 0 [ 4.150812] [drm] Device feb00000.display probed [ 4.521350] Console: switching to colour frame buffer device 240x67 [ 4.543779] rcar-du feb00000.display: fb0: rcar-dudrmfb frame buffer device [ 4.554494] bd9571mwv 7-0030: Device: BD9571MWV rev. 4 [ 4.620783] renesas_sdhi_internal_dmac ee100000.sd: mmc1 base at 0xee100000 max clock rate 200 MHz [ 4.679340] renesas_sdhi_internal_dmac ee160000.sd: mmc2 base at 0xee160000 max clock rate 200 MHz [ 4.689554] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: sink widget TX overwritten [ 4.697509] asoc-audio-graph-card sound: ak4613-hifi <-> rsnd-dai.0 mapping ok [ 4.704917] asoc-audio-graph-card sound: i2s-hifi <-> rsnd-dai.1 mapping ok [ 4.711972] asoc-audio-graph-card sound: i2s-hifi <-> rsnd-dai.2 mapping ok [ 4.718994] asoc-audio-graph-card sound: ASoC: no DMI vendor name! [ 4.729225] hctosys: unable to open rtc device (rtc0) [ 4.807895] Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=183) [ 11.480202] ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 11.500698] Sending DHCP requests .., OK [ 14.000715] IP-Config: Got DHCP answer from 192.168.66.1, my address is 192.168.66.11 [ 14.008508] IP-Config: Complete: [ 14.011720] device=eth0, hwaddr=00:80:45:1b:40:7f, ipaddr=192.168.66.11, mask=255.255.255.0, gw=192.168.66.1 [ 14.021929] host=192.168.66.11, domain=example.org, nis-domain=(none) [ 14.028768] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= [ 14.028769] nameserver0=10.1.1.1 [ 14.038910] ALSA device list: [ 14.041867] #0: rcar-sound [ 14.048153] Freeing unused kernel memory: 6080K [ 14.064801] Run /init as init process Starting logging: OK Populating /dev using udev: [ 14.097500] udevd[318]: starting version 3.2.5 [ 14.102246] random: udevd: uninitialized urandom read (16 bytes read) [ 14.108803] random: udevd: uninitialized urandom read (16 bytes read) [ 14.115240] random: udevd: uninitialized urandom read (16 bytes read) [ 14.125478] udevd[319]: starting eudev-3.2.5 done Initializing random number generator... done. Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off Matched prompt #12: / # case: kernel-messages
case_id: 4089391
definition: lava
duration: 13.35
extra: ...
level: 2.4.4.1
namespace: common
result: pass
Setting prompt string to ['root@h3ulcb:~', 'h3ulcb:~#', '/ #'] end: 2.4.4.1 login-action (duration 00:00:13) [common] case: login-action
case_id: 4089392
definition: lava
duration: 13.35
extra: ...
level: 2.4.4.1
namespace: common
result: pass
end: 2.4.4 auto-login-action (duration 00:00:15) [common] end: 2.4 uboot-commands (duration 00:00:44) [common] end: 2 uboot-action (duration 00:00:44) [common] start: 3 finalize (timeout 00:30:00) [common] start: 3.1 power-off (timeout 00:00:10) [common] Calling: '/usr/local/bin/acme-cli' '-s' '192.168.66.2' 'switch_off' '8' >> Success Returned 0 in 0 seconds end: 3.1 power-off (duration 00:00:00) [common] case: power-off
case_id: 4089393
definition: lava
duration: 0.24
extra: ...
level: 3.1
namespace: common
result: pass
start: 3.2 read-feedback (timeout 00:30:00) [common] Finalising connection for namespace 'common' Disconnecting from shell: Finalise / # end: 3.2 read-feedback (duration 00:00:01) [common] end: 3 finalize (duration 00:00:01) [common] Cleaning after the job Cleaning up download directory: /var/lib/lava/dispatcher/tmp/37672/tftp-deploy-2gk2b_se/ramdisk Cleaning up download directory: /var/lib/lava/dispatcher/tmp/37672/tftp-deploy-2gk2b_se/kernel Cleaning up download directory: /var/lib/lava/dispatcher/tmp/37672/tftp-deploy-2gk2b_se/dtb Override tmp directory removed at /var/lib/lava/dispatcher/tmp/37672 Root tmp directory removed at /var/lib/lava/dispatcher/tmp/37672 Job finished correctly case: job
case_id: 4089394
definition: lava
result: pass