lava-dispatcher, installed at version: 2023.01 start: 0 validate Start time: 2023-05-03 18:45:05.491450+00:00 (UTC) Validating that http://download.automotivelinux.org/AGL/upload/ci/28782/1/raspberrypi4/initramfs-netboot-image-raspberrypi4-64.ext4.gz exists Validating that http://download.automotivelinux.org/AGL/upload/ci/28782/1/raspberrypi4/Image exists Validating that http://download.automotivelinux.org/AGL/upload/ci/28782/1/raspberrypi4/bcm2711-rpi-4-b+vc4.dtb exists Validating that http://download.automotivelinux.org/AGL/upload/ci/28782/1/raspberrypi4/agl-demo-platform-raspberrypi4-64.ext4.xz exists validate duration: 0.83 case: validate
case_id: 3931938
definition: lava
result: pass
start: 1 nbd-deploy (timeout 01:30:00) [common] Making protocol call for nbd-deploy using lava-xnbd [nbd-deploy] Checking protocol data for lava-xnbd Get a port from pool Set_port 61961 start: 1.1 download-retry (timeout 01:30:00) [common] start: 1.1.1 http-download (timeout 01:30:00) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/28782/1/raspberrypi4/initramfs-netboot-image-raspberrypi4-64.ext4.gz saving as /var/lib/lava/dispatcher/tmp/33193/nbd-deploy-w77z9tnb/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz total size: 2062029 (1MB) No compression specified progress 1% (0MB) progress 6% (0MB) progress 11% (0MB) progress 17% (0MB) progress 22% (0MB) progress 27% (0MB) progress 33% (0MB) progress 38% (0MB) progress 44% (0MB) progress 49% (0MB) progress 54% (1MB) progress 60% (1MB) progress 65% (1MB) progress 71% (1MB) progress 76% (1MB) progress 81% (1MB) progress 87% (1MB) progress 92% (1MB) progress 98% (1MB) 1MB downloaded in 0.92s (2.14MB/s) end: 1.1.1 http-download (duration 00:00:01) [common] case: http-download
case_id: 3932015
definition: lava
duration: 0.92
extra: ...
level: 1.1.1
namespace: common
result: pass
end: 1.1 download-retry (duration 00:00:01) [common] start: 1.2 download-retry (timeout 01:29:59) [common] start: 1.2.1 http-download (timeout 01:29:59) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/28782/1/raspberrypi4/Image saving as /var/lib/lava/dispatcher/tmp/33193/nbd-deploy-w77z9tnb/kernel/Image total size: 25246208 (24MB) No compression specified progress 0% (0MB) progress 5% (1MB) progress 10% (2MB) progress 15% (3MB) progress 20% (4MB) progress 25% (6MB) progress 30% (7MB) progress 35% (8MB) progress 40% (9MB) progress 45% (10MB) progress 50% (12MB) progress 55% (13MB) progress 60% (14MB) progress 65% (15MB) progress 70% (16MB) progress 75% (18MB) progress 80% (19MB) progress 85% (20MB) progress 90% (21MB) progress 95% (22MB) progress 100% (24MB) 24MB downloaded in 1.99s (12.11MB/s) end: 1.2.1 http-download (duration 00:00:02) [common] case: http-download
case_id: 3932015
definition: lava
duration: 1.99
extra: ...
level: 1.2.1
namespace: common
result: pass
end: 1.2 download-retry (duration 00:00:02) [common] start: 1.3 download-retry (timeout 01:29:57) [common] start: 1.3.1 http-download (timeout 01:29:57) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/28782/1/raspberrypi4/bcm2711-rpi-4-b+vc4.dtb saving as /var/lib/lava/dispatcher/tmp/33193/nbd-deploy-w77z9tnb/dtb/bcm2711-rpi-4-b+vc4.dtb total size: 52323 (0MB) No compression specified progress 62% (0MB) progress 100% (0MB) 0MB downloaded in 0.40s (0.12MB/s) end: 1.3.1 http-download (duration 00:00:00) [common] case: http-download
case_id: 3932015
definition: lava
duration: 0.41
extra: ...
level: 1.3.1
namespace: common
result: pass
end: 1.3 download-retry (duration 00:00:00) [common] start: 1.4 download-retry (timeout 01:29:57) [common] start: 1.4.1 http-download (timeout 01:29:57) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/28782/1/raspberrypi4/agl-demo-platform-raspberrypi4-64.ext4.xz saving as /var/lib/lava/dispatcher/tmp/33193/nbd-deploy-w77z9tnb/nbdroot/agl-demo-platform-raspberrypi4-64.ext4 total size: 815025608 (777MB) Using unxz to decompress xz progress 0% (0MB) progress 5% (38MB) progress 10% (77MB) progress 15% (116MB) progress 20% (155MB) progress 25% (194MB) progress 30% (233MB) progress 35% (272MB) progress 40% (310MB) progress 45% (349MB) progress 50% (388MB) progress 55% (427MB) progress 60% (466MB) progress 65% (505MB) progress 70% (544MB) progress 75% (582MB) progress 80% (621MB) progress 85% (660MB) progress 90% (699MB) progress 95% (738MB) progress 100% (777MB) 777MB downloaded in 151.02s (5.15MB/s) end: 1.4.1 http-download (duration 00:02:31) [common] case: http-download
case_id: 3932015
definition: lava
duration: 151.02
extra: ...
level: 1.4.1
namespace: common
result: pass
end: 1.4 download-retry (duration 00:02:31) [common] start: 1.5 lava-overlay (timeout 01:27:26) [common] [common] Preparing overlay tarball in /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo makedir: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin makedir: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/tests makedir: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/results Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-add-keys Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-add-sources Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-background-process-start Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-background-process-stop Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-common-functions Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-echo-ipv4 Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-install-packages Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-installed-packages Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-os-build Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-probe-channel Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-probe-ip Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-target-ip Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-target-mac Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-target-storage Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-test-case Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-test-event Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-test-feedback Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-test-raise Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-test-reference Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-test-runner Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-test-set Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-test-shell Updating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-install-packages (oe) Updating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/bin/lava-installed-packages (oe) Creating /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/environment LAVA metadata - LAVA_JOB_ID=33193 - LAVA_DISPATCHER_IP=192.168.66.1 start: 1.5.1 ssh-authorize (timeout 01:27:26) [common] end: 1.5.1 ssh-authorize (duration 00:00:00) [common] start: 1.5.2 lava-vland-overlay (timeout 01:27:26) [common] skipped lava-vland-overlay end: 1.5.2 lava-vland-overlay (duration 00:00:00) [common] start: 1.5.3 lava-multinode-overlay (timeout 01:27:26) [common] skipped lava-multinode-overlay end: 1.5.3 lava-multinode-overlay (duration 00:00:00) [common] start: 1.5.4 test-definition (timeout 01:27:26) [common] Loading test definitions start: 1.5.4.1 git-repo-action (timeout 01:27:26) [common] Using /lava-33193 at stage 0 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/0/tests/0_network-veth' Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/0/tests/0_network-veth/test-suites/short-smoke/network-veth.yaml uuid=33193_1.5.4.1 testdef=None end: 1.5.4.1 git-repo-action (duration 00:00:02) [common] case: git-repo-action
case_id: 3932042
definition: lava
duration: 1.58
extra: ...
level: 1.5.4.1
namespace: common
result: pass
start: 1.5.4.2 test-overlay (timeout 01:27:24) [common] end: 1.5.4.2 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 3932043
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.2
namespace: common
result: pass
start: 1.5.4.3 test-install-overlay (timeout 01:27:24) [common] end: 1.5.4.3 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 3932044
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.3
namespace: common
result: pass
start: 1.5.4.4 test-runscript-overlay (timeout 01:27:24) [common] runner path: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/0/tests/0_network-veth test_uuid 33193_1.5.4.1 end: 1.5.4.4 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 3932045
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.4
namespace: common
result: pass
start: 1.5.4.5 git-repo-action (timeout 01:27:24) [common] Using /lava-33193 at stage 1 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/1_ci-busybox' Removing '.git' directory in /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/1_ci-busybox Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/1_ci-busybox/test-suites/short-smoke/busybox.yaml uuid=33193_1.5.4.5 testdef={'testdef_pattern': {'pattern': '^(?P<test_case_id>[a-zA-Z0-9_-]+):\\s(?P<result>\\w+)', 'fixupdict': {'PASS': 'pass', 'FAIL': 'fail'}}} end: 1.5.4.5 git-repo-action (duration 00:00:02) [common] case: git-repo-action
case_id: 3932042
definition: lava
duration: 1.59
extra: ...
level: 1.5.4.5
namespace: common
result: pass
start: 1.5.4.6 test-overlay (timeout 01:27:22) [common] end: 1.5.4.6 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 3932043
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.6
namespace: common
result: pass
start: 1.5.4.7 test-install-overlay (timeout 01:27:22) [common] end: 1.5.4.7 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 3932044
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.7
namespace: common
result: pass
start: 1.5.4.8 test-runscript-overlay (timeout 01:27:22) [common] runner path: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/1_ci-busybox test_uuid 33193_1.5.4.5 end: 1.5.4.8 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 3932045
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.8
namespace: common
result: pass
start: 1.5.4.9 git-repo-action (timeout 01:27:22) [common] Using /lava-33193 at stage 1 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/2_ci-smoke-tests-basic' Removing '.git' directory in /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/2_ci-smoke-tests-basic Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/2_ci-smoke-tests-basic/test-suites/short-smoke/smoke-tests-basic.yaml uuid=33193_1.5.4.9 testdef=None end: 1.5.4.9 git-repo-action (duration 00:00:02) [common] case: git-repo-action
case_id: 3932042
definition: lava
duration: 1.61
extra: ...
level: 1.5.4.9
namespace: common
result: pass
start: 1.5.4.10 test-overlay (timeout 01:27:21) [common] end: 1.5.4.10 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 3932043
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.10
namespace: common
result: pass
start: 1.5.4.11 test-install-overlay (timeout 01:27:21) [common] end: 1.5.4.11 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 3932044
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.11
namespace: common
result: pass
start: 1.5.4.12 test-runscript-overlay (timeout 01:27:21) [common] runner path: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/2_ci-smoke-tests-basic test_uuid 33193_1.5.4.9 end: 1.5.4.12 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 3932045
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.12
namespace: common
result: pass
start: 1.5.4.13 git-repo-action (timeout 01:27:21) [common] Using /lava-33193 at stage 1 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/3_ci-service-check' Removing '.git' directory in /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/3_ci-service-check Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/3_ci-service-check/test-suites/short-smoke/service-check.yaml uuid=33193_1.5.4.13 testdef=None end: 1.5.4.13 git-repo-action (duration 00:00:02) [common] case: git-repo-action
case_id: 3932042
definition: lava
duration: 1.62
extra: ...
level: 1.5.4.13
namespace: common
result: pass
start: 1.5.4.14 test-overlay (timeout 01:27:19) [common] end: 1.5.4.14 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 3932043
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.14
namespace: common
result: pass
start: 1.5.4.15 test-install-overlay (timeout 01:27:19) [common] end: 1.5.4.15 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 3932044
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.15
namespace: common
result: pass
start: 1.5.4.16 test-runscript-overlay (timeout 01:27:19) [common] runner path: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1/tests/3_ci-service-check test_uuid 33193_1.5.4.13 BUILD_TAGS='' DEVICE_TAGS='' end: 1.5.4.16 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 3932045
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.16
namespace: common
result: pass
start: 1.5.4.17 git-repo-action (timeout 01:27:19) [common] Using /lava-33193 at stage 2 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/2/tests/4_screenshooter' Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/2/tests/4_screenshooter/test-suites/short-smoke/screenshooter.yaml uuid=33193_1.5.4.17 testdef=None end: 1.5.4.17 git-repo-action (duration 00:00:02) [common] case: git-repo-action
case_id: 3932042
definition: lava
duration: 1.60
extra: ...
level: 1.5.4.17
namespace: common
result: pass
start: 1.5.4.18 test-overlay (timeout 01:27:17) [common] end: 1.5.4.18 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 3932043
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.18
namespace: common
result: pass
start: 1.5.4.19 test-install-overlay (timeout 01:27:17) [common] end: 1.5.4.19 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 3932044
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.19
namespace: common
result: pass
start: 1.5.4.20 test-runscript-overlay (timeout 01:27:17) [common] runner path: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/2/tests/4_screenshooter test_uuid 33193_1.5.4.17 end: 1.5.4.20 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 3932045
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.20
namespace: common
result: pass
start: 1.5.4.21 git-repo-action (timeout 01:27:17) [common] Using /lava-33193 at stage 3 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/3/tests/5_ci-dumpjournal' Removing '.git' directory in /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/3/tests/5_ci-dumpjournal Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/3/tests/5_ci-dumpjournal/test-suites/short-smoke/dumpjournal.yaml uuid=33193_1.5.4.21 testdef={'testdef_pattern': {'pattern': '^(?P<test_case_id>[a-zA-Z0-9_-]+):\\s(?P<result>\\w+)', 'fixupdict': {'PASS': 'pass', 'FAIL': 'fail'}}} end: 1.5.4.21 git-repo-action (duration 00:00:02) [common] case: git-repo-action
case_id: 3932042
definition: lava
duration: 1.61
extra: ...
level: 1.5.4.21
namespace: common
result: pass
start: 1.5.4.22 test-overlay (timeout 01:27:16) [common] end: 1.5.4.22 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 3932043
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.22
namespace: common
result: pass
start: 1.5.4.23 test-install-overlay (timeout 01:27:16) [common] end: 1.5.4.23 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 3932044
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.23
namespace: common
result: pass
start: 1.5.4.24 test-runscript-overlay (timeout 01:27:16) [common] runner path: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/3/tests/5_ci-dumpjournal test_uuid 33193_1.5.4.21 end: 1.5.4.24 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 3932045
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.24
namespace: common
result: pass
Creating lava-test-runner.conf files Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/0 for stage 0 - 0_network-veth Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/1 for stage 1 - 1_ci-busybox - 2_ci-smoke-tests-basic - 3_ci-service-check Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/2 for stage 2 - 4_screenshooter Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/33193/lava-overlay-6_yddyuo/lava-33193/3 for stage 3 - 5_ci-dumpjournal end: 1.5.4 test-definition (duration 00:00:10) [common] start: 1.5.5 compress-overlay (timeout 01:27:16) [common] end: 1.5.5 compress-overlay (duration 00:00:01) [common] start: 1.5.6 persistent-nfs-overlay (timeout 01:27:15) [common] end: 1.5.6 persistent-nfs-overlay (duration 00:00:00) [common] end: 1.5 lava-overlay (duration 00:00:11) [common] start: 1.6 prepare-kernel (timeout 01:27:15) [common] start: 1.6.1 uboot-prepare-kernel (timeout 01:27:15) [common] end: 1.6.1 uboot-prepare-kernel (duration 00:00:00) [common] end: 1.6 prepare-kernel (duration 00:00:00) [common] start: 1.7 xnbd-server-deploy (timeout 01:27:15) [common] xnbd-server-deploy: starting nbd-server NBD-IP: 192.168.66.1, NBD-PORT: 61961, NBD-ROOT: 33193/nbd-deploy-w77z9tnb/nbdroot/agl-demo-platform-raspberrypi4-64.ext4 nbd-server 61961 /var/lib/lava/dispatcher/tmp/33193/nbd-deploy-w77z9tnb/nbdroot/agl-demo-platform-raspberrypi4-64.ext4 output: output: ** (process:627): WARNING **: 18:47:51.255: Specifying an export on the command line no longer uses the oldstyle protocol. output: xnbd-server-deploy: starting nbd-server done end: 1.7 xnbd-server-deploy (duration 00:00:00) [common] end: 1 nbd-deploy (duration 00:02:45) [common] start: 2 uboot-action (timeout 00:20:00) [common] start: 2.1 uboot-from-media (timeout 00:20:00) [common] end: 2.1 uboot-from-media (duration 00:00:00) [common] start: 2.2 bootloader-overlay (timeout 00:20:00) [common] substitutions: - {BOOTX}: booti 0x00080000 0x02700000:${initrd_size} 0x02400000 - {DTB_ADDR}: 0x02400000 - {DTB}: 33193/nbd-deploy-w77z9tnb/dtb/bcm2711-rpi-4-b+vc4.dtb - {INITRD}: 33193/nbd-deploy-w77z9tnb/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz - {KERNEL_ADDR}: 0x00080000 - {KERNEL}: 33193/nbd-deploy-w77z9tnb/kernel/Image - {LAVA_MAC}: None - {NBDSERVERIP}: 192.168.66.1 - {NBDSERVERPORT}: 61961 - {PRESEED_CONFIG}: None - {PRESEED_LOCAL}: None - {RAMDISK_ADDR}: 0x02700000 - {RAMDISK}: 33193/nbd-deploy-w77z9tnb/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz - {ROOT_PART}: None - {ROOT}: None - {SERVER_IP}: 192.168.66.1 - {TEE_ADDR}: 0x83000000 - {TEE}: None Parsed boot commands: - setenv autoload no - setenv initrd_high 0xffffffff - setenv fdt_high 0xffffffff - dhcp - setenv serverip 192.168.66.1 - tftp 0x00080000 33193/nbd-deploy-w77z9tnb/kernel/Image - tftp 0x02700000 33193/nbd-deploy-w77z9tnb/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz - setenv initrd_size ${filesize} - tftp 0x02400000 33193/nbd-deploy-w77z9tnb/dtb/bcm2711-rpi-4-b+vc4.dtb - setenv bootargs 'console=ttyS0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61961 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 coherent_pool=1M 8250.nr_uarts=1 rw fstab=no systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' - fdt addr 0x02400000; fdt boardsetup; fdt resize; fdt set audio status okay; booti 0x00080000 0x02700000:${initrd_size} 0x02400000 end: 2.2 bootloader-overlay (duration 00:00:00) [common] case: bootloader-overlay
case_id: 3932046
definition: lava
duration: 0.02
extra: ...
level: 2.2
namespace: common
result: pass
start: 2.3 connect-device (timeout 00:20:00) [common] [common] connect-device Connecting to device using 'telnet 127.0.0.1 63003' Setting prompt string to ['lava-test: # '] end: 2.3 connect-device (duration 00:00:03) [common] start: 2.4 uboot-commands (timeout 00:19:57) [common] start: 2.4.1 reset-device (timeout 00:19:57) [common] start: 2.4.1.1 pdu-reboot (timeout 00:19:57) [common] Calling: 'nice' '/usr/local/bin/acme-cli' '-s' '192.168.66.2' 'reset' '7' >> Success >> Success Returned 0 in 4 seconds end: 2.4.1.1 pdu-reboot (duration 00:00:05) [common] case: pdu-reboot
case_id: 3932047
definition: lava
duration: 4.62
extra: ...
level: 2.4.1.1
namespace: common
result: pass
end: 2.4.1 reset-device (duration 00:00:05) [common] start: 2.4.2 bootloader-interrupt (timeout 00:19:52) [common] Setting prompt string to ['Hit any key to stop autoboot'] bootloader-interrupt: Wait for prompt ['Hit any key to stop autoboot'] (timeout 00:20:00) Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot 2020.07-00717-gfee68b98fe-dirty (Jul 17 2020 - 09:59:08 +0200) DRAM: 3.9 GiB RPI 4 Model B (0xc03111) MMC: emmc2@7e340000: 0, mmcnr@7e300000: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: genet@7d580000 starting USB... No working controllers found c end: 2.4.2 bootloader-interrupt (duration 00:00:10) [common] start: 2.4.3 bootloader-commands (timeout 00:19:42) [common] Setting prompt string to ['U-Boot>'] bootloader-commands: Wait for prompt ['U-Boot>'] (timeout 00:19:42) Hit any key to stop autoboot: 2  0 Setting prompt string to ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] setenv autoload no U-Boot> setenv autoload no bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:42) setenv autoload no setenv initrd_high 0xffffffff U-Boot> setenv initrd_high 0xffffffff bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:42) setenv initrd_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:42) setenv fdt_high 0xffffffff dhcp U-Boot> dhcp bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:41) dhcp genet@7d580000 Waiting for PHY auto negotiation to complete........ done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.66.241 (1028 ms) setenv serverip 192.168.66.1 U-Boot> setenv serverip 192.168.66.1 bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:37) setenv serverip 192.168.66.1 tftp 0x00080000 33193/nbd-deploy-w77z9tnb/kernel/Image U-Boot> tftp 0x00080000 33193/nbd-deploy-w77z9tnb/kernel/Image bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:37) tftp 0x00080000 33193/nbd-deploy-w77z9tnb/kernel/Image Using genet@7d580000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.241 Filename '33193/nbd-deploy-w77z9tnb/kernel/Image'. Load address: 0x80000 Loading: *T #T ################################################# 24.1 MiB 916 KiB/s done Bytes transferred = 25246208 (1813a00 hex) tftp 0x02700000 33193/nbd-deploy-w77z9tnb/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz U-Boot> tftp 0x02700000 33193/nbd-deploy-w77z9tnb/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:09) tftp 0x02700000 33193/nbd-deploy-w77z9tnb/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz Using genet@7d580000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.241 Filename '33193/nbd-deploy-w77z9tnb/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz'. Load address: 0x2700000 Loading: *################################################## 2 MiB 1.2 MiB/s done Bytes transferred = 2062029 (1f76cd hex) setenv initrd_size ${filesize} U-Boot> setenv initrd_size ${filesize} bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:08) setenv initrd_size ${filesize} tftp 0x02400000 33193/nbd-deploy-w77z9tnb/dtb/bcm2711-rpi-4-b+vc4.dtb U-Boot> tftp 0x02400000 33193/nbd-deploy-w77z9tnb/dtb/bcm2711-rpi-4-b+vc4.dtb bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:08) tftp 0x02400000 33193/nbd-deploy-w77z9tnb/dtb/bcm2711-rpi-4-b+vc4.dtb Using genet@7d580000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.241 Filename '33193/nbd-deploy-w77z9tnb/dtb/bcm2711-rpi-4-b+vc4.dtb'. Load address: 0x2400000 Loading: *################################################## 51.1 KiB 500 KiB/s done Bytes transferred = 52323 (cc63 hex) setenv bootargs 'console=ttyS0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61961 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 coherent_pool=1M 8250.nr_uarts=1 rw fstab=no systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' U-Boot> setenv bootargs 'console=ttyS0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61961 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 coherent_pool=1M 8250.nr_uarts=1 rw fstab=no systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:07) setenv bootargs 'console=ttyS0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61961 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 coherent_pool=1M 8250.nr_uarts=1 rw fstab=no systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' fdt addr 0x02400000; fdt boardsetup; fdt resize; fdt set audio status okay; booti 0x00080000 0x02700000:${initrd_size} 0x02400000 U-Boot> fdt addr 0x02400000; fdt boardsetup; fdt resize; fdt set audio status okay; booti 0x00080000 0x02700000:${initrd_size} 0x02400000 Setting prompt string to ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] bootloader-commands: Wait for prompt ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:07) fdt addr 0x02400000; fdt boardsetup; fdt resize; fdt set audio status okay; booti 0x00080000 0x02700000:${initrd_size} 0x02400000 ## Flattened Device Tree blob at 02400000 Booting using the fdt blob at 0x2400000 Loading Ramdisk to 3ad51000, end 3af486cd ... OK Loading Device Tree to 000000003ad41000, end 000000003ad50fff ... OK Starting kernel ... end: 2.4.3 bootloader-commands (duration 00:00:35) [common] start: 2.4.4 auto-login-action (timeout 00:19:07) [common] Setting prompt string to ['Linux version [0-9]'] Setting prompt string to ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] auto-login-action: Wait for prompt ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:20:00) [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.15.34-v8 (oe-user@oe-host) (aarch64-agl-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Jan 30 17:33:20 UTC 2023 [ 0.000000] Machine model: Raspberry Pi 4 Model B [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001c400000, size 316 MiB start: 2.4.4.1 login-action (timeout 00:19:05) [common] The string '/ #' does not look like a typical prompt and could match status messages instead. Please check the job log files and use a prompt string which matches the actual prompt string more closely. Setting prompt string to ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing'] Using line separator: #'\n'# Waiting for the login prompt Parsing kernel messages ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing', 'root@raspberrypi4-64:~', 'raspberrypi4-64:~#', '/ #', 'login:', 'Login incorrect'] [login-action] Waiting for messages, (timeout 00:19:05) [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] percpu: Embedded 29 pages/cpu s78232 r8192 d32360 u118784 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61961 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 coherent_pool=1M 8250.nr_uarts=1 rw fstab=no systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw [ 0.000000] Unknown kernel command line parameters \"verbose earlyprintk ${extraargs} fstab=no\", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000036d41000-0x000000003ad41000] (64MB) [ 0.000000] Memory: 3552904K/4050944K available (13440K kernel code, 2062K rwdata, 4800K rodata, 4224K init, 1012K bss, 174456K reserved, 323584K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 42578 entries in 167 pages [ 0.000000] ftrace: allocated 167 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10) [ 0.000000] random: get_random_bytes called from start_kernel+0x510/0x700 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000252] Console: colour dummy device 80x25 [ 0.000331] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000361] pid_max: default: 32768 minimum: 301 [ 0.000499] LSM: Security Framework initializing [ 0.000717] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000779] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001952] cgroup: Disabling memory control group subsystem [ 0.004465] rcu: Hierarchical SRCU implementation. [ 0.005472] EFI services will not be available. [ 0.005978] smp: Bringing up secondary CPUs ... [ 0.007017] Detected PIPT I-cache on CPU1 [ 0.007087] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.008327] Detected PIPT I-cache on CPU2 [ 0.008377] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.009487] Detected PIPT I-cache on CPU3 [ 0.009535] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.009717] smp: Brought up 1 node, 4 CPUs [ 0.009764] SMP: Total of 4 processors activated. [ 0.009779] CPU features: detected: 32-bit EL0 Support [ 0.009792] CPU features: detected: 32-bit EL1 Support [ 0.009808] CPU features: detected: CRC32 instructions [ 0.043302] CPU: All CPU(s) started at EL2 [ 0.043388] alternatives: patching kernel code [ 0.045048] devtmpfs: initialized [ 0.055923] Enabled cp15_barrier support [ 0.055970] Enabled setend support [ 0.055994] KASLR disabled due to lack of seed [ 0.056356] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.056394] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.066726] pinctrl core: initialized pinctrl subsystem [ 0.067511] DMI not present or invalid. [ 0.068124] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.071558] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.071861] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.072768] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.072864] audit: initializing netlink subsys (disabled) [ 0.073140] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1 [ 0.073677] thermal_sys: Registered thermal governor 'step_wise' [ 0.073903] cpuidle: using governor menu [ 0.074141] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.074320] ASID allocator initialised with 65536 entries [ 0.074471] Serial: AMBA PL011 UART driver [ 0.086192] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.112367] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-01-22T17:23:15, variant start [ 0.116386] raspberrypi-firmware soc:firmware: Firmware hash is acb03c7d18aa08f25f6419d696d0cc39761d3e62 [ 0.168430] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.172754] vgaarb: loaded [ 0.173182] SCSI subsystem initialized [ 0.173399] usbcore: registered new interface driver usbfs [ 0.173457] usbcore: registered new interface driver hub [ 0.173526] usbcore: registered new device driver usb [ 0.173880] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.174426] pps_core: LinuxPPS API ver. 1 registered [ 0.174444] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.174471] PTP clock support registered [ 0.174744] Advanced Linux Sound Architecture Driver Initialized. [ 0.175960] clocksource: Switched to clocksource arch_sys_counter [ 0.268505] VFS: Disk quotas dquot_6.6.0 [ 0.268621] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.268786] FS-Cache: Loaded [ 0.269029] CacheFiles: Loaded [ 0.279768] NET: Registered PF_INET protocol family [ 0.280261] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.283630] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.283688] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.283872] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.284392] TCP: Hash tables configured (established 32768 bind 32768) [ 0.284623] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.284690] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.284966] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.285896] RPC: Registered named UNIX socket transport module. [ 0.285919] RPC: Registered udp transport module. [ 0.285933] RPC: Registered tcp transport module. [ 0.285947] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.285970] PCI: CLS 0 bytes, default 64 [ 0.286528] Trying to unpack rootfs image as initramfs... [ 0.286955] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.294141] Freeing initrd memory: 2012K [ 0.295849] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.296245] kvm [1]: IPA Size Limit: 44 bits [ 0.297517] kvm [1]: vgic interrupt IRQ9 [ 0.297796] kvm [1]: Hyp mode initialized successfully [ 1.187806] Initialise system trusted keyrings [ 1.188268] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.195002] zbud: loaded [ 1.196801] FS-Cache: Netfs 'nfs' registered for caching [ 1.197490] NFS: Registering the id_resolver key type [ 1.197538] Key type id_resolver registered [ 1.197554] Key type id_legacy registered [ 1.197662] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.197680] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.198984] NET: Registered PF_ALG protocol family [ 1.199007] Key type asymmetric registered [ 1.199022] Asymmetric key parser 'x509' registered [ 1.199107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.199354] io scheduler mq-deadline registered [ 1.199374] io scheduler kyber registered [ 1.207167] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.207214] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.207303] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.207389] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000 [ 1.254057] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.254422] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.254445] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.254468] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.254565] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.254812] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.258520] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.258808] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.258879] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.259121] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.262701] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.262750] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.262776] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.262819] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.262846] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.269069] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 1.271919] iproc-rng200 fe104000.rng: hwrng registered [ 1.272446] vc-mem: phys_addr:0x00000000 mem_base=0x00000000 mem_size:0x00000000(0 MiB) [ 1.273876] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.283038] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 1.283071] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 1.283303] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 1.296468] brd: module loaded [ 1.306140] loop: module loaded [ 1.337029] Loading iSCSI transport class v2.0-870. [ 1.341679] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.404114] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.405195] usbcore: registered new interface driver r8152 [ 1.405264] usbcore: registered new interface driver lan78xx [ 1.405281] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.405296] ehci-pci: EHCI PCI platform driver [ 1.405375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.405413] ohci-pci: OHCI PCI platform driver [ 1.406944] pci 0000:00:00.0: enabling device (0000 -> 0002) [ 1.406986] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002) [ 1.407083] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.407118] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.407833] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890 [ 1.408777] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.408803] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.408822] usb usb1: Product: xHCI Host Controller [ 1.408839] usb usb1: Manufacturer: Linux 5.15.34-v8 xhci-hcd [ 1.408856] usb usb1: SerialNumber: 0000:01:00.0 [ 1.409591] hub 1-0:1.0: USB hub found [ 1.409671] hub 1-0:1.0: 1 port detected [ 1.410327] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.410355] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.410392] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.410812] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.410837] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.410854] usb usb2: Product: xHCI Host Controller [ 1.410870] usb usb2: Manufacturer: Linux 5.15.34-v8 xhci-hcd [ 1.410886] usb usb2: SerialNumber: 0000:01:00.0 [ 1.411552] hub 2-0:1.0: USB hub found [ 1.411621] hub 2-0:1.0: 4 ports detected [ 1.413266] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.414109] usbcore: registered new interface driver uas [ 1.414200] usbcore: registered new interface driver usb-storage [ 1.414332] usbcore: registered new interface driver usbserial_generic [ 1.414370] usbserial: USB Serial support registered for generic [ 1.414444] usbcore: registered new interface driver cp210x [ 1.414480] usbserial: USB Serial support registered for cp210x [ 1.414711] mousedev: PS/2 mouse device common for all mice [ 1.415309] usbcore: registered new interface driver i2c-tiny-usb [ 1.420422] sdhci: Secure Digital Host Controller Interface driver [ 1.420444] sdhci: Copyright(c) Pierre Ossman [ 1.421090] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.424543] ledtrig-cpu: registered to indicate activity on CPUs [ 1.425148] hid: raw HID events driver (C) Jiri Kosina [ 1.425525] usbcore: registered new interface driver usbhid [ 1.425543] usbhid: USB HID core driver [ 1.425839] ashmem: initialized [ 1.434094] usbcore: registered new interface driver snd-usb-audio [ 1.435348] Initializing XFRM netlink socket [ 1.435392] NET: Registered PF_PACKET protocol family [ 1.435618] Key type dns_resolver registered [ 1.436719] registered taskstats version 1 [ 1.436759] Loading compiled-in X.509 certificates [ 1.437723] Key type ._fscrypt registered [ 1.437744] Key type .fscrypt registered [ 1.437758] Key type fscrypt-provisioning registered [ 1.448847] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.449133] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.449303] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2 [ 1.458473] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [ 1.459146] printk: console [ttyS0] disabled [ 1.459256] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 20, base_baud = 62500000) is a 16550 [ 1.663999] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.678072] printk: console [ttyS0] enabled [ 1.833612] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 1.843696] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 1.849433] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.849448] usb 1-1: Product: USB2.0 Hub [ 1.854324] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 1.860642] hub 1-1:1.0: USB hub found [ 1.863793] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 1.868008] hub 1-1:1.0: 4 ports detected [ 1.875865] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 2.171989] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd [ 2.178734] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 2.285712] usb 1-1.3: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 2.289380] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 2.290602] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.296008] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 2.301135] usb 1-1.3: Product: USB2.0 Hub [ 2.339848] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 2.339877] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 2.340088] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 2.348412] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 2.353075] usb 1-1.3: Manufacturer: VIA Labs, Inc. [ 2.357115] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 2.357295] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 2.360484] of_cfs_init [ 2.366820] hub 1-1.3:1.0: USB hub found [ 2.368216] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 2.374490] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 2.374518] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 2.374667] of_cfs_init: OK [ 2.383031] hub 1-1.3:1.0: 4 ports detected [ 2.391175] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 2.435643] random: fast init done [ 3.114772] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 3.123445] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 3.130536] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 3.140189] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 3.148994] bcmgenet fd580000.ethernet eth0: Link is Down [ 3.160898] mmc1: new high speed SDIO card at address 0001 [ 3.174843] mmc0: new ultra high speed DDR50 SDHC card at address 59b4 [ 3.182421] mmcblk0: mmc0:59b4 USDU1 7.51 GiB [ 3.189911] mmcblk0: p1 p2 [ 3.193321] mmcblk0: mmc0:59b4 USDU1 7.51 GiB [ 3.202419] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 3.211023] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 3.218118] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 3.311992] usb 1-1.3.1: new high-speed USB device number 4 using xhci_hcd [ 3.434221] usb 1-1.3.1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 3.442901] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.450526] usb 1-1.3.1: Product: USB2.0 Hub [ 3.456025] usb 1-1.3.1: Manufacturer: VIA Labs, Inc. [ 3.463496] hub 1-1.3.1:1.0: USB hub found [ 3.467964] hub 1-1.3.1:1.0: 4 ports detected [ 3.484450] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 3.493089] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 3.500178] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 3.775989] usb 1-1.3.1.1: new full-speed USB device number 5 using xhci_hcd [ 6.212215] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 6.235984] Sending DHCP requests ., OK [ 6.255932] IP-Config: Got DHCP answer from 192.168.66.1, my address is 192.168.66.241 [ 6.264030] IP-Config: Complete: [ 6.267308] device=eth0, hwaddr=dc:a6:32:54:fa:25, ipaddr=192.168.66.241, mask=255.255.255.0, gw=192.168.66.1 [ 6.277831] host=192.168.66.241, domain=, nis-domain=(none) [ 6.283947] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= [ 6.283960] nameserver0=10.1.1.1 [ 6.295970] ALSA device list: [ 6.298994] No soundcards found. [ 6.302885] Waiting 7 sec before mounting root device... [ 13.540183] RAMDISK: gzip image found at block 0 [ 13.846612] EXT4-fs (ram0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 13.856209] VFS: Mounted root (ext4 filesystem) on device 1:0. [ 13.862298] devtmpfs: mounted [ 13.872883] Freeing unused kernel memory: 4224K [ 13.884209] Run /sbin/init as init process ________________________________________________________________________________ ___ ________ _ __ __ __ __ / | / ____/ / / | / /__ / /_/ /_ ____ ____ / /_ / /| |/ / __/ / ______ / |/ / _ \/ __/ __ \/ __ \/ __ \/ __/ / ___ / /_/ / /___ /_____/ / /| / __/ /_/ /_/ / /_/ / /_/ / /_ /_/ |_\____/_____/ /_/ |_/\___/\__/_.___/\____/\____/\__/ ________________________________________________________________________________ /sbin/init[1]: starting initrd script /sbin/init[1]: mounting FS: proc /proc /sbin/init[1]: mounting FS: sysfs /sys /sbin/init[1]: mounting FS: devtmpfs /dev /sbin/init[1]: /dev (devtmpfs) already mounted /sbin/init[1]: mounting FS: devpts /dev/pts /sbin/init[1]: mounting FS: tmpfs /dev/shm /sbin/init[1]: mounting FS: tmpfs /tmp /sbin/init[1]: mounting FS: tmpfs /run /sbin/init[1]: NBD parameters: device /dev/nbd0, server 192.168.66.1:61961 /sbin/init[1]: Starting NBD client [ 14.077114] nbd0: detected capacity change from 0 to 7983784 /sbin/init[1]: NBD client successfully started [ 15.036753] EXT4-fs (nbd0): recovery complete [ 15.043169] EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. /sbin/init[1]: Moving /dev to new rootfs /sbin/init[1]: Moving /proc to new rootfs /sbin/init[1]: Moving /sys to new rootfs /sbin/init[1]: Moving /tmp to new rootfs /sbin/init[1]: Moving /run to new rootfs /sbin/init[1]: Switching to new rootfs /sbin/init[1]: find_active_interface: first active interface is eth0 /sbin/init[1]: Adjusting Connman command line. Will be: 'connmand -r -n -I eth0' /sbin/init[1]: Unmounting /tmp and /run /sbin/init[1]: Exec'ing systemd ________________________________________________________________________________ ___ ________ ____ __ _ / | / ____/ / / __ )____ ____ / /_(_)___ ____ _ / /| |/ / __/ / / __ / __ \/ __ \/ __/ / __ \/ __ `/ / ___ / /_/ / /___ / /_/ / /_/ / /_/ / /_/ / / / / /_/ / _ _ _ /_/ |_\____/_____/ /_____/\____/\____/\__/_/_/ /_/\__, / (_) (_) (_) _____________________________________________________/____/_____________________ [ 16.496657] random: crng init done [ 17.771338] systemd[1]: System time before build time, advancing clock. [ 18.160378] systemd[1]: systemd 250.5+ running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 18.193084] systemd[1]: Detected architecture arm64. Welcome to Automotive Grade Linux 15.90.0+snapshot-09def309f91929f47c6cce386016ccb777bd2cfc (pike)! [ 18.286194] systemd[1]: Hostname set to <h3ulcb>. [ 19.264269] usb 1-1.3.1.1: device descriptor read/64, error -110 [ 20.016870] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 20.636125] systemd[1]: Queued start job for default target Graphical Interface. [ 20.700878] systemd[1]: Created slice Slice /system/agl-session. [ OK ] Created slice Slice /system/agl-session. [ 20.722410] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 20.742269] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 20.762242] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 20.786253] systemd[1]: Created slice Slice /system/wireplumber. [ OK ] Created slice Slice /system/wireplumber. [ 20.809833] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 20.828565] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 20.852450] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 20.876302] systemd[1]: Reached target Host and Network Name Lookups. [ OK ] Reached target Host and Network Name Lookups. [ 20.896137] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 20.916170] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 20.936137] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 20.956195] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 20.981493] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 21.004555] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 21.029257] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 21.048915] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 21.069036] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 21.089178] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 21.113130] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 21.132767] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 21.152825] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 21.172927] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 21.191231] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 21.217423] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 21.241651] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 21.276262] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 21.300819] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/5.15.34-v8/modules.devname). [ 21.321914] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 21.349449] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 21.373348] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 21.397594] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen... [ 21.428090] systemd[1]: Starting SELinux autorelabel service loading... Starting SELinux autorelabel service loading... [ 21.462105] systemd[1]: Starting SELinux init for /dev service loading... Starting SELinux init for /dev service loading... [ 21.561156] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [ 21.583358] systemd[1]: Starting Journal Service... Starting Journal Service... [ 21.667248] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 21.688414] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 21.704645] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [ 21.722144] systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev... [ 21.750489] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 21.772773] systemd[1]: Bind mount volatile /var/cache was skipped because of a failed condition check (ConditionPathIsReadWrite=!/var/cache). [ 21.786172] systemd[1]: Bind mount volatile /var/lib was skipped because of a failed condition check (ConditionPathIsReadWrite=!/var/lib). [ 21.805128] systemd[1]: Starting Load/Save Random Seed... Starting Load/Save Random Seed... [ 21.824397] systemd[1]: Bind mount volatile /var/spool was skipped because of a failed condition check (ConditionPathIsReadWrite=!/var/spool). [ 21.838845] systemd[1]: Bind mount volatile /srv was skipped because of a failed condition check (ConditionPathIsReadWrite=!/srv). [ 21.866524] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 21.889092] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 21.912989] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. [ 21.933083] systemd[1]: Mounted Temporary Directory /tmp. [ OK ] Mounted Temporary Directory /tmp. [ 21.962252] systemd[1]: [email protected]: Deactivated successfully. [ 21.972640] systemd[1]: Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module configfs. [ 21.995053] systemd[1]: [email protected]: Deactivated successfully. [ 21.995342] audit: type=1130 audit(1675100004.251:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ 22.004423] systemd[1]: Finished Load Kernel Module drm. [ 22.021224] audit: type=1131 audit(1675100004.251:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Finished Load Kernel Module drm. [ 22.065213] audit: type=1130 audit(1675100004.323:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ 22.066646] systemd[1]: Started Journal Service. [ 22.084058] audit: type=1131 audit(1675100004.323:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Started Journal Service. [ 22.124026] audit: type=1130 audit(1675100004.379:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Finished Load Kernel Module fuse. [ 22.159972] audit: type=1130 audit(1675100004.415:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [FAILED][ 22.178995] audit: type=1131 audit(1675100004.415:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Start psplash…emd progress communication helper. [ 22.244350] audit: type=1130 audit(1675100004.503:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=psplash-start comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=failed' [ OK ] Finished SELinux autorelabel service loading. [ 22.276248] audit: type=1130 audit(1675100004.535:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=selinux-autorelabel comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ 22.295791] audit: type=1131 audit(1675100004.535:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=selinux-autorelabel comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Finished SELinux init for /dev service loading. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Finished Load/Save Random Seed. [ OK ] Reached target Local File Systems. Mounting Kernel Configuration File System... Starting SELinux resolv.conf relabeling... Starting SELinux init service loading... Starting Flush Journal to Persistent Storage... Starting Apply Kernel Variables... Starting Rule-based Manager for Device Events and Files... [ 22.568922] systemd-journald[193]: Received client request to flush runtime journal. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished SELinux resolv.conf relabeling. [ OK ] Finished SELinux init service loading. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. Starting Create Volatile Files and Directories... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Volatile Files and Directories. Starting Security Auditing Service... Starting Wait for udev To Complete Device Initialization... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Started Security Auditing Service. Starting Record System Boot/Shutdown in UTMP... [ OK ] Finished Record System Boot/Shutdown in UTMP. [* ] A start job is running for Wait for…vice Initialization (4s / 3min 2s) M[K[** ] A start job is running for Wait for…vice Initialization (5s / 3min 2s) M[K[*** ] A start job is running for Wait for…vice Initialization (5s / 3min 2s) M[K[ *** ] A start job is running for Wait for…vice Initialization (6s / 3min 2s) M[K[ *** ] A start job is running for Wait for…vice Initialization (7s / 3min 2s) M[K[ ***] A start job is running for Wait for…vice Initialization (7s / 3min 2s) M[K[ **] A start job is running for Wait for…vice Initialization (8s / 3min 2s) M[K[ *] A start job is running for Wait for…vice Initialization (8s / 3min 2s) M[K[ **] A start job is running for Wait for…vice Initialization (9s / 3min 2s) M[K[ ***] A start job is running for Wait for…vice Initialization (9s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (10s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (10s / 3min 2s) M[K[*** ] A start job is running for Wait for…ice Initialization (11s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (11s / 3min 2s) M[K[* ] A start job is running for Wait for…ice Initialization (12s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (12s / 3min 2s) M[K[*** ] A start job is running for Wait for…ice Initialization (13s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (13s / 3min 2s) [ 34.880274] usb 1-1.3.1.1: device descriptor read/64, error -110 M[K[ *** ] A start job is running for Wait for…ice Initialization (14s / 3min 2s) [ 35.083991] usb 1-1.3.1.1: new full-speed USB device number 6 using xhci_hcd M[K[ ***] A start job is running for Wait for…ice Initialization (14s / 3min 2s) M[K[ **] A start job is running for Wait for…ice Initialization (15s / 3min 2s) M[K[ *] A start job is running for Wait for…ice Initialization (15s / 3min 2s) M[K[ **] A start job is running for Wait for…ice Initialization (16s / 3min 2s) M[K[ ***] A start job is running for Wait for…ice Initialization (16s / 3min 2s) [ 37.860023] cam-dummy-reg: disabling M[K[ *** ] A start job is running for Wait for…ice Initialization (17s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (17s / 3min 2s) M[K[*** ] A start job is running for Wait for…ice Initialization (18s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (18s / 3min 2s) M[K[* ] A start job is running for Wait for…ice Initialization (19s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (19s / 3min 2s) M[K[*** ] A start job is running for Wait for…ice Initialization (20s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (20s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (21s / 3min 2s) M[K[ ***] A start job is running for Wait for…ice Initialization (21s / 3min 2s) M[K[ **] A start job is running for Wait for…ice Initialization (22s / 3min 2s) M[K[ *] A start job is running for Wait for…ice Initialization (22s / 3min 2s) M[K[ **] A start job is running for Wait for…ice Initialization (23s / 3min 2s) M[K[ ***] A start job is running for Wait for…ice Initialization (23s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (24s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (24s / 3min 2s) M[K[*** ] A start job is running for Wait for…ice Initialization (25s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (25s / 3min 2s) M[K[* ] A start job is running for Wait for…ice Initialization (26s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (26s / 3min 2s) M[K[*** ] A start job is running for Wait for…ice Initialization (27s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (27s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (28s / 3min 2s) M[K[ ***] A start job is running for Wait for…ice Initialization (28s / 3min 2s) M[K[ **] A start job is running for Wait for…ice Initialization (29s / 3min 2s) M[K[ *] A start job is running for Wait for…ice Initialization (29s / 3min 2s) [ 50.496246] usb 1-1.3.1.1: device descriptor read/64, error -110 M[K[ **] A start job is running for Wait for…ice Initialization (30s / 3min 2s) M[K[ ***] A start job is running for Wait for…ice Initialization (30s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (31s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (31s / 3min 2s) M[K[*** ] A start job is running for Wait for…ice Initialization (32s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (32s / 3min 2s) M[K[* ] A start job is running for Wait for…ice Initialization (33s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (33s / 3min 2s) M[K[*** ] A start job is running for Wait for…ice Initialization (34s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (34s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (35s / 3min 2s) M[K[ ***] A start job is running for Wait for…ice Initialization (35s / 3min 2s) M[K[ **] A start job is running for Wait for…ice Initialization (36s / 3min 2s) M[K[ *] A start job is running for Wait for…ice Initialization (36s / 3min 2s) M[K[ **] A start job is running for Wait for…ice Initialization (37s / 3min 2s) M[K[ ***] A start job is running for Wait for…ice Initialization (37s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (38s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (38s / 3min 2s) M[K[*** ] A start job is running for Wait for…ice Initialization (39s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (39s / 3min 2s) M[K[* ] A start job is running for Wait for…ice Initialization (40s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (40s / 3min 2s) M[K[*** ] A start job is running for Wait for…ice Initialization (41s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (41s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (42s / 3min 2s) M[K[ ***] A start job is running for Wait for…ice Initialization (42s / 3min 2s) M[K[ **] A start job is running for Wait for…ice Initialization (43s / 3min 2s) M[K[ *] A start job is running for Wait for…ice Initialization (43s / 3min 2s) M[K[ **] A start job is running for Wait for…ice Initialization (44s / 3min 2s) M[K[ ***] A start job is running for Wait for…ice Initialization (44s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (45s / 3min 2s) [ 66.112239] usb 1-1.3.1.1: device descriptor read/64, error -110 [ 66.224574] usb 1-1.3.1-port1: attempt power cycle M[K[ *** ] A start job is running for Wait for…ice Initialization (45s / 3min 2s) [ 66.856021] usb 1-1.3.1.1: new full-speed USB device number 7 using xhci_hcd M[K[*** ] A start job is running for Wait for…ice Initialization (46s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (46s / 3min 2s) [ 67.738250] xhci_hcd 0000:01:00.0: ERROR: unexpected setup address command completion code 0x24. M[K[* ] A start job is running for Wait for…ice Initialization (47s / 3min 2s) M[K[** ] A start job is running for Wait for…ice Initialization (47s / 3min 2s) [ 68.827133] xhci_hcd 0000:01:00.0: ERROR: unexpected setup address command completion code 0x24. M[K[*** ] A start job is running for Wait for…ice Initialization (48s / 3min 2s) [ 69.043999] usb 1-1.3.1.1: device not accepting address 7, error -22 [ 69.139990] usb 1-1.3.1.1: new full-speed USB device number 8 using xhci_hcd M[K[ *** ] A start job is running for Wait for…ice Initialization (48s / 3min 2s) M[K[ *** ] A start job is running for Wait for…ice Initialization (49s / 3min 2s) [ 70.022112] xhci_hcd 0000:01:00.0: ERROR: unexpected setup address command completion code 0x24. M[K[ ***] A start job is running for Wait for…ice Initialization (49s / 3min 2s) M[K[ **] A start job is running for Wait for…ice Initialization (50s / 3min 2s) [ 71.111105] xhci_hcd 0000:01:00.0: ERROR: unexpected setup address command completion code 0x24. [ 71.327992] usb 1-1.3.1.1: device not accepting address 8, error -22 [ 71.334915] usb 1-1.3.1-port1: unable to enumerate USB device M[K[ *] A start job is running for Wait for…ice Initialization (50s / 3min 2s) M[K[ OK ] Finished Wait for udev To Complete Device Initialization. [K[ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timer Units. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on GPS (Global Positioning System) Daemon Sockets. [ OK ] Listening on mpd.socket. Starting PipeWire Multimedia System Socket... Starting sshd.socket... [ OK ] Listening on PipeWire Multimedia System Socket. [ OK ] Listening on sshd.socket. [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. Starting CAN interface helper... Starting D-Bus System Message Bus... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... Starting Telephony service... [ OK ] Started PipeWire Multimedia Service. Starting User Login Management... Starting Disk Manager... [ OK ] Started Multimedia Service Session Manager. [ OK ] Started Multimedia Service Session Manager (bluetooth). [ OK ] Started Multimedia Service Session Manager (policy). Starting OpenSSH Key Generation... [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ OK ] Finished OpenSSH Key Generation. [ OK ] Finished CAN interface helper. [ OK ] Started Network Configuration. [ OK ] Started D-Bus System Message Bus. Starting Connection service... [ OK ] Started Telephony service. [ OK ] Started User Login Management. [ OK ] Started Connection service. [ OK ] Reached target Network. [ OK ] Started agl-service-radio.service. [ OK ] Started applaunchd.service. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Eclipse KUKSA.val VIS server. [ OK ] Started agl-service-audiomixer.service. [ OK ] Started agl-service-hvac.service. [ OK ] Started Eclipse KUKSA.val DBC feeder. Starting Permit User Sessions... [ OK ] Finished Permit User Sessions. [ OK ] Started AGL user session. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting Authorization Manager... Starting Hostname Service... Starting WPA supplicant... [ OK ] Started Authorization Manager. [ OK ] Started WPA supplicant. [ OK ] Started Hostname Service. Starting User Database Manager... [ OK ] Started User Database Manager. [ OK ] Created slice User Slice of UID 1001. Starting User Runtime Directory /run/user/1001... [ OK ] Finished User Runtime Directory /run/user/1001. Starting User Manager for UID 1001... [ OK ] Started Disk Manager. [ OK ] Started Automount Disk Manager. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Record Runlevel Change in UTMP... [ OK ] Finished Record Runlevel Change in UTMP. [ OK ] Started User Manager for UID 1001. [ OK ] Started Session c1 of User agl-driver. Automotive Grade Linux 15.90.0+snapshot-09def309f91929f47c6cce386016ccb777bd2cfc h3ulcb ttyS0 Matched prompt #13: login: case: kernel-messages
case_id: 3932079
definition: lava
duration: 77.70
extra: ...
level: 2.4.4.1
namespace: common
result: pass
Sending username root root h3ulcb login: root Setting prompt string to ['root@raspberrypi4-64:~', 'raspberrypi4-64:~#', '/ #'] login-action: Wait for prompt ['root@raspberrypi4-64:~', 'raspberrypi4-64:~#', '/ #', 'Login incorrect', 'Login timed out'] (timeout 00:17:47) root 7[r[999;999H[6nroot@h3ulcb:~# [ 232.609988] block nbd0: Receive control failed (result -32) [ 232.615899] block nbd0: shutting down sockets [ 232.704293] blk_update_request: I/O error, dev nbd0, sector 3025088 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 232.715457] blk_update_request: I/O error, dev nbd0, sector 3025088 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 232.727841] blk_update_request: I/O error, dev nbd0, sector 467304 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 232.738900] blk_update_request: I/O error, dev nbd0, sector 467304 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 232.749657] blk_update_request: I/O error, dev nbd0, sector 467304 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 232.760595] blk_update_request: I/O error, dev nbd0, sector 467304 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 232.771799] blk_update_request: I/O error, dev nbd0, sector 3024776 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 232.782760] blk_update_request: I/O error, dev nbd0, sector 340016 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 232.782761] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #43905: comm python3: reading directory lblock 0 [ 232.804529] blk_update_request: I/O error, dev nbd0, sector 354656 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 232.804538] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #20: comm systemd-udevd: reading directory lblock 0 [ 232.815350] EXT4-fs warning (device nbd0): dx_probe:788: inode #834: lblock 0: comm python3: error -5 reading directory block [ 232.826743] blk_update_request: I/O error, dev nbd0, sector 354632 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 232.848870] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #820: comm systemd-udevd: reading directory lblock 0 [ 232.848893] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm python3: error -5 reading directory block [ 232.860486] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #57529: comm systemd-udevd: reading directory lblock 0 [ 232.872035] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #42136: comm python3: reading directory lblock 0 [ 232.883634] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #20: comm systemd-udevd: reading directory lblock 0 [ 232.894577] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #43518: comm python3: reading directory lblock 0 [ 232.905660] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #20: comm systemd-udevd: reading directory lblock 0 [ 232.916730] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #43905: comm python3: reading directory lblock 0 [ 232.927896] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #56968: comm systemd-udevd: reading directory lblock 0 [ 232.939342] EXT4-fs warning (device nbd0): dx_probe:788: inode #834: lblock 0: comm python3: error -5 reading directory block [ 232.962092] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm python3: error -5 reading directory block [ 232.976684] EXT4-fs warning (device nbd0): dx_probe:788: inode #834: lblock 0: comm python3: error -5 reading directory block [ 232.988561] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm python3: error -5 reading directory block [ 233.001677] EXT4-fs warning (device nbd0): dx_probe:788: inode #834: lblock 0: comm python3: error -5 reading directory block [ 233.013402] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm python3: error -5 reading directory block [ 233.026190] EXT4-fs warning (device nbd0): dx_probe:788: inode #834: lblock 0: comm python3: error -5 reading directory block [ 233.037907] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm python3: error -5 reading directory block [ 233.482129] Buffer I/O error on device nbd0, logical block 950280 [ 233.488464] EXT4-fs (nbd0): Delayed block allocation failed for inode 515948 at logical offset 11 with max blocks 3 with error 5 [ 233.500387] EXT4-fs (nbd0): This should not happen!! Data will be lost [ 233.500387] [ 237.028248] Aborting journal on device nbd0-8. [ 237.032853] Buffer I/O error on dev nbd0, logical block 458752, lost sync page write [ 237.040789] JBD2: Error -5 detected when updating journal superblock for nbd0-8. [ 398.313804] print_req_error: 153 callbacks suppressed [ 398.313828] blk_update_request: I/O error, dev nbd0, sector 340016 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 398.329821] EXT4-fs error: 119 callbacks suppressed [ 398.329838] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #20: comm systemd-userwor: reading directory lblock 0 [ 398.346469] blk_update_request: I/O error, dev nbd0, sector 340016 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 398.357311] blk_update_request: I/O error, dev nbd0, sector 0 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0 [ 398.357384] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #20: comm systemd-userwor: reading directory lblock 0 [ 398.367820] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 398.386679] blk_update_request: I/O error, dev nbd0, sector 3574680 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 398.397592] blk_update_request: I/O error, dev nbd0, sector 340016 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 398.397605] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #56968: comm systemd-userwor: reading directory lblock 0 [ 398.408402] EXT4-fs (nbd0): I/O error while writing superblock [ 398.408518] blk_update_request: I/O error, dev nbd0, sector 0 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0 [ 398.408524] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #20: comm systemd-userwor: reading directory lblock 0 [ 398.447836] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 398.455320] blk_update_request: I/O error, dev nbd0, sector 3574680 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 398.466222] EXT4-fs (nbd0): I/O error while writing superblock [ 398.472230] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #56968: comm systemd-userwor: reading directory lblock 0 [ 398.472272] blk_update_request: I/O error, dev nbd0, sector 0 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0 [ 398.494346] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 398.501860] blk_update_request: I/O error, dev nbd0, sector 3574680 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 398.512781] EXT4-fs (nbd0): I/O error while writing superblock [ 398.512781] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #56968: comm systemd-userwor: reading directory lblock 0 [ 398.518866] blk_update_request: I/O error, dev nbd0, sector 0 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0 [ 398.540878] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 398.548389] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #56968: comm systemd-userwor: reading directory lblock 0 [ 398.548431] EXT4-fs (nbd0): I/O error while writing superblock [ 398.560220] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #56968: comm systemd-userwor: reading directory lblock 0 [ 398.566123] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 398.585192] EXT4-fs (nbd0): I/O error while writing superblock [ 398.585189] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #56968: comm systemd-userwor: reading directory lblock 0 [ 398.591223] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 398.610290] EXT4-fs (nbd0): I/O error while writing superblock [ 398.610287] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #56968: comm systemd-userwor: reading directory lblock 0 [ 398.616311] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 398.635393] EXT4-fs (nbd0): I/O error while writing superblock [ 398.636505] EXT4-fs warning: 12 callbacks suppressed [ 398.636518] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm systemd-userwor: error -5 reading directory block [ 398.641426] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 398.666157] EXT4-fs (nbd0): I/O error while writing superblock [ 398.666156] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm systemd-userwor: error -5 reading directory block [ 398.684506] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm systemd-userwor: error -5 reading directory block [ 398.696948] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm systemd-userwor: error -5 reading directory block [ 398.709370] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm systemd-userwor: error -5 reading directory block [ 398.721790] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm systemd-userwor: error -5 reading directory block [ 398.734211] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm systemd-userwor: error -5 reading directory block [ 398.746632] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm systemd-userwor: error -5 reading directory block [ 398.759057] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm systemd-userwor: error -5 reading directory block [ 398.759060] EXT4-fs warning (device nbd0): dx_probe:788: inode #5461: lblock 0: comm systemd-userwor: error -5 reading directory block [ 398.784608] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 398.792133] EXT4-fs (nbd0): I/O error while writing superblock [ 398.798207] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 398.805763] EXT4-fs (nbd0): I/O error while writing superblock [ 930.226685] print_req_error: 1138 callbacks suppressed [ 930.226706] blk_update_request: I/O error, dev nbd0, sector 354632 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 930.242806] EXT4-fs error: 483 callbacks suppressed [ 930.242823] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #820: comm (tmpfiles): reading directory lblock 0 [ 930.259076] blk_update_request: I/O error, dev nbd0, sector 0 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0 [ 930.269549] buffer_io_error: 372 callbacks suppressed [ 930.269558] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 930.282187] blk_update_request: I/O error, dev nbd0, sector 354632 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 930.293027] EXT4-fs: 372 callbacks suppressed [ 930.293024] EXT4-fs error (device nbd0): __ext4_find_entry:1612: inode #820: comm (tmpfiles): reading directory lblock 0 [ 930.293037] EXT4-fs (nbd0): I/O error while writing superblock [ 930.314567] blk_update_request: I/O error, dev nbd0, sector 0 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0 [ 930.325043] Buffer I/O error on dev nbd0, logical block 0, lost sync page write [ 930.332541] blk_update_request: I/O error, dev nbd0, sector 4732800 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 930.343471] EXT4-fs (nbd0): I/O error while writing superblock [ 930.343491] EXT4-fs warning: 325 callbacks suppressed [ 930.343504] EXT4-fs warning (device nbd0): dx_probe:788: inode #68156: lblock 0: comm (tmpfiles): error -5 reading directory block [ 930.366644] blk_update_request: I/O error, dev nbd0, sector 354656 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0 [ 930.377512] EXT4-fs warning (device nbd0): dx_probe:788: inode #834: lblock 0: comm (tmpfiles): error -5 reading directory block login-action timed out after 1145 seconds end: 2.4.4.1 login-action (duration 00:19:05) [common] case: login-action
case_id: 3932110
definition: lava
duration: 1145.00
extra: ...
level: 2.4.4.1
namespace: common
result: fail
auto-login-action failed: 1 of 1 attempts. 'login-action timed out after 1145 seconds' login-action timed out after 1145 seconds end: 2.4.4 auto-login-action (duration 00:19:07) [common] case: auto-login-action
case_id: 3932111
definition: lava
duration: 1147.00
extra: ...
level: 2.4.4
namespace: common
result: fail
login-action timed out after 1145 seconds end: 2.4 uboot-commands (duration 00:19:57) [common] case: uboot-commands
case_id: 3932112
definition: lava
duration: 1196.86
extra: ...
level: 2.4
namespace: common
result: fail
uboot-action failed: 1 of 1 attempts. 'login-action timed out after 1145 seconds' login-action timed out after 1145 seconds end: 2 uboot-action (duration 00:20:00) [common] case: uboot-action
case_id: 3932113
definition: lava
duration: 1200.00
extra: ...
level: 2
namespace: common
result: fail
Cleaning after the job Cleaning up download directory: /var/lib/lava/dispatcher/tmp/33193/nbd-deploy-w77z9tnb/initrd Cleaning up download directory: /var/lib/lava/dispatcher/tmp/33193/nbd-deploy-w77z9tnb/kernel Cleaning up download directory: /var/lib/lava/dispatcher/tmp/33193/nbd-deploy-w77z9tnb/dtb Cleaning up download directory: /var/lib/lava/dispatcher/tmp/33193/nbd-deploy-w77z9tnb/nbdroot start: 7.1 power-off (timeout 00:00:10) [common] Calling: 'nice' '/usr/local/bin/acme-cli' '-s' '192.168.66.2' 'switch_off' '7' >> Success Returned 0 in 3 seconds end: 7.1 power-off (duration 00:00:04) [common] case: power-off
case_id: 3932114
definition: lava
duration: 3.53
extra: ...
level: 7.1
namespace: common
result: pass
start: 7.2 read-feedback (timeout 00:29:56) [common] Listened to connection for namespace 'common' for up to 1s Finalising connection for namespace 'common' Disconnecting from shell: Finalise end: 7.2 read-feedback (duration 00:00:01) [common] lava-xnbd cleanup clean NBD port 61961 Override tmp directory removed at /var/lib/lava/dispatcher/tmp/33193 Root tmp directory removed at /var/lib/lava/dispatcher/tmp/33193 JobError: Your job cannot terminate cleanly. case: job
case_id: 3932115
definition: lava
error_msg: login-action timed out after 1145 seconds
error_type: Job
result: fail