lava-dispatcher, installed at version: 2023.01 start: 0 validate Start time: 2023-03-09 05:33:32.546559+00:00 (UTC) Validating that http://download.automotivelinux.org/AGL/upload/ci/28560/2/h3ulcb-nogfx/initramfs-netboot-image-h3ulcb.ext4.gz exists Validating that http://download.automotivelinux.org/AGL/upload/ci/28560/2/h3ulcb-nogfx/Image exists Validating that http://download.automotivelinux.org/AGL/upload/ci/28560/2/h3ulcb-nogfx/r8a77951-agl-refhw.dtb exists Validating that http://download.automotivelinux.org/AGL/upload/ci/28560/2/h3ulcb-nogfx/agl-demo-platform-h3ulcb.ext4.xz exists validate duration: 0.91 case: validate
case_id: 3885648
definition: lava
result: pass
start: 1 nbd-deploy (timeout 01:30:00) [common] Making protocol call for nbd-deploy using lava-xnbd [nbd-deploy] Checking protocol data for lava-xnbd Get a port from pool Set_port 61996 start: 1.1 download-retry (timeout 01:30:00) [common] start: 1.1.1 http-download (timeout 01:30:00) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/28560/2/h3ulcb-nogfx/initramfs-netboot-image-h3ulcb.ext4.gz saving as /var/lib/lava/dispatcher/tmp/32190/nbd-deploy-kl9yqp4j/initrd/initramfs-netboot-image-h3ulcb.ext4.gz total size: 2057818 (1MB) No compression specified progress 1% (0MB) progress 6% (0MB) progress 11% (0MB) progress 17% (0MB) progress 22% (0MB) progress 27% (0MB) progress 33% (0MB) progress 38% (0MB) progress 44% (0MB) progress 49% (0MB) progress 54% (1MB) progress 60% (1MB) progress 65% (1MB) progress 70% (1MB) progress 76% (1MB) progress 81% (1MB) progress 87% (1MB) progress 92% (1MB) progress 97% (1MB) 1MB downloaded in 1.20s (1.63MB/s) end: 1.1.1 http-download (duration 00:00:01) [common] case: http-download
case_id: 3885652
definition: lava
duration: 1.21
extra: ...
level: 1.1.1
namespace: common
result: pass
end: 1.1 download-retry (duration 00:00:01) [common] start: 1.2 download-retry (timeout 01:29:59) [common] start: 1.2.1 http-download (timeout 01:29:59) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/28560/2/h3ulcb-nogfx/Image saving as /var/lib/lava/dispatcher/tmp/32190/nbd-deploy-kl9yqp4j/kernel/Image total size: 39076352 (37MB) No compression specified progress 0% (0MB) progress 5% (1MB) progress 10% (3MB) progress 15% (5MB) progress 20% (7MB) progress 25% (9MB) progress 30% (11MB) progress 35% (13MB) progress 40% (14MB) progress 45% (16MB) progress 50% (18MB) progress 55% (20MB) progress 60% (22MB) progress 65% (24MB) progress 70% (26MB) progress 75% (27MB) progress 80% (29MB) progress 85% (31MB) progress 90% (33MB) progress 95% (35MB) progress 100% (37MB) 37MB downloaded in 13.59s (2.74MB/s) end: 1.2.1 http-download (duration 00:00:14) [common] case: http-download
case_id: 3885652
definition: lava
duration: 13.59
extra: ...
level: 1.2.1
namespace: common
result: pass
end: 1.2 download-retry (duration 00:00:14) [common] start: 1.3 download-retry (timeout 01:29:45) [common] start: 1.3.1 http-download (timeout 01:29:45) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/28560/2/h3ulcb-nogfx/r8a77951-agl-refhw.dtb saving as /var/lib/lava/dispatcher/tmp/32190/nbd-deploy-kl9yqp4j/dtb/r8a77951-agl-refhw.dtb total size: 88958 (0MB) No compression specified progress 36% (0MB) progress 73% (0MB) progress 100% (0MB) 0MB downloaded in 0.41s (0.21MB/s) end: 1.3.1 http-download (duration 00:00:00) [common] case: http-download
case_id: 3885652
definition: lava
duration: 0.41
extra: ...
level: 1.3.1
namespace: common
result: pass
end: 1.3 download-retry (duration 00:00:00) [common] start: 1.4 download-retry (timeout 01:29:45) [common] start: 1.4.1 http-download (timeout 01:29:45) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/28560/2/h3ulcb-nogfx/agl-demo-platform-h3ulcb.ext4.xz saving as /var/lib/lava/dispatcher/tmp/32190/nbd-deploy-kl9yqp4j/nbdroot/agl-demo-platform-h3ulcb.ext4 total size: 486378676 (463MB) Using unxz to decompress xz progress 0% (0MB) progress 5% (23MB) progress 10% (46MB) progress 15% (69MB) progress 20% (92MB) progress 25% (115MB) progress 30% (139MB) progress 35% (162MB) progress 40% (185MB) progress 45% (208MB) progress 50% (231MB) progress 55% (255MB) progress 60% (278MB) progress 65% (301MB) progress 70% (324MB) progress 75% (347MB) progress 80% (371MB) progress 85% (394MB) progress 90% (417MB) progress 95% (440MB) progress 100% (463MB) 463MB downloaded in 196.29s (2.36MB/s) end: 1.4.1 http-download (duration 00:03:16) [common] case: http-download
case_id: 3885652
definition: lava
duration: 196.29
extra: ...
level: 1.4.1
namespace: common
result: pass
end: 1.4 download-retry (duration 00:03:16) [common] start: 1.5 lava-overlay (timeout 01:26:28) [common] [common] Preparing overlay tarball in /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf makedir: /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin makedir: /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/tests makedir: /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/results Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-add-keys Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-add-sources Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-background-process-start Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-background-process-stop Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-common-functions Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-echo-ipv4 Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-install-packages Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-installed-packages Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-os-build Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-probe-channel Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-probe-ip Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-target-ip Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-target-mac Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-target-storage Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-test-case Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-test-event Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-test-feedback Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-test-raise Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-test-reference Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-test-runner Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-test-set Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-test-shell Updating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-install-packages (oe) Updating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/bin/lava-installed-packages (oe) Creating /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/environment LAVA metadata - LAVA_JOB_ID=32190 - LAVA_DISPATCHER_IP=192.168.66.1 start: 1.5.1 ssh-authorize (timeout 01:26:28) [common] end: 1.5.1 ssh-authorize (duration 00:00:00) [common] start: 1.5.2 lava-vland-overlay (timeout 01:26:28) [common] skipped lava-vland-overlay end: 1.5.2 lava-vland-overlay (duration 00:00:00) [common] start: 1.5.3 lava-multinode-overlay (timeout 01:26:28) [common] skipped lava-multinode-overlay end: 1.5.3 lava-multinode-overlay (duration 00:00:00) [common] start: 1.5.4 test-definition (timeout 01:26:28) [common] Loading test definitions start: 1.5.4.1 git-repo-action (timeout 01:26:28) [common] Using /lava-32190 at stage 0 Fetching tests from https://github.com/duerpei/yan_test.git Running '/usr/bin/git clone --depth=1 https://github.com/duerpei/yan_test.git /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/0/tests/0_check_disk_space' Removing '.git' directory in /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/0/tests/0_check_disk_space Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/0/tests/0_check_disk_space/./check_space.yaml uuid=32190_1.5.4.1 testdef=None end: 1.5.4.1 git-repo-action (duration 00:00:02) [common] case: git-repo-action
case_id: 3885653
definition: lava
duration: 2.41
extra: ...
level: 1.5.4.1
namespace: common
result: pass
start: 1.5.4.2 test-overlay (timeout 01:26:26) [common] end: 1.5.4.2 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 3885654
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.2
namespace: common
result: pass
start: 1.5.4.3 test-install-overlay (timeout 01:26:26) [common] end: 1.5.4.3 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 3885655
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.3
namespace: common
result: pass
start: 1.5.4.4 test-runscript-overlay (timeout 01:26:26) [common] runner path: /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/0/tests/0_check_disk_space test_uuid 32190_1.5.4.1 end: 1.5.4.4 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 3885656
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.4
namespace: common
result: pass
Creating lava-test-runner.conf files Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/32190/lava-overlay-1vuhdmuf/lava-32190/0 for stage 0 - 0_check_disk_space end: 1.5.4 test-definition (duration 00:00:02) [common] start: 1.5.5 compress-overlay (timeout 01:26:26) [common] end: 1.5.5 compress-overlay (duration 00:00:00) [common] start: 1.5.6 persistent-nfs-overlay (timeout 01:26:26) [common] end: 1.5.6 persistent-nfs-overlay (duration 00:00:00) [common] end: 1.5 lava-overlay (duration 00:00:03) [common] start: 1.6 prepare-kernel (timeout 01:26:26) [common] start: 1.6.1 uboot-prepare-kernel (timeout 01:26:26) [common] end: 1.6.1 uboot-prepare-kernel (duration 00:00:00) [common] end: 1.6 prepare-kernel (duration 00:00:00) [common] start: 1.7 xnbd-server-deploy (timeout 01:26:26) [common] xnbd-server-deploy: starting nbd-server NBD-IP: 192.168.66.1, NBD-PORT: 61996, NBD-ROOT: 32190/nbd-deploy-kl9yqp4j/nbdroot/agl-demo-platform-h3ulcb.ext4 nbd-server 61996 /var/lib/lava/dispatcher/tmp/32190/nbd-deploy-kl9yqp4j/nbdroot/agl-demo-platform-h3ulcb.ext4 output: output: ** (process:4530): WARNING **: 05:37:07.558: Specifying an export on the command line no longer uses the oldstyle protocol. output: xnbd-server-deploy: starting nbd-server done end: 1.7 xnbd-server-deploy (duration 00:00:00) [common] end: 1 nbd-deploy (duration 00:03:34) [common] start: 2 uboot-action (timeout 00:20:00) [common] start: 2.1 uboot-from-media (timeout 00:20:00) [common] end: 2.1 uboot-from-media (duration 00:00:00) [common] start: 2.2 bootloader-overlay (timeout 00:20:00) [common] substitutions: - {BOOTX}: booti 0x48080000 0x4c000000:${initrd_size} 0x48000000 - {DTB_ADDR}: 0x48000000 - {DTB}: 32190/nbd-deploy-kl9yqp4j/dtb/r8a77951-agl-refhw.dtb - {INITRD}: 32190/nbd-deploy-kl9yqp4j/initrd/initramfs-netboot-image-h3ulcb.ext4.gz - {KERNEL_ADDR}: 0x48080000 - {KERNEL}: 32190/nbd-deploy-kl9yqp4j/kernel/Image - {LAVA_MAC}: None - {NBDSERVERIP}: 192.168.66.1 - {NBDSERVERPORT}: 61996 - {PRESEED_CONFIG}: None - {PRESEED_LOCAL}: None - {RAMDISK_ADDR}: 0x4c000000 - {RAMDISK}: 32190/nbd-deploy-kl9yqp4j/initrd/initramfs-netboot-image-h3ulcb.ext4.gz - {ROOT_PART}: None - {ROOT}: None - {SERVER_IP}: 192.168.66.1 - {TEE_ADDR}: 0x83000000 - {TEE}: None Parsed boot commands: - setenv autoload no - setenv initrd_high 0xffffffff - setenv fdt_high 0xffffffff - dhcp - setenv serverip 192.168.66.1 - tftp 0x48080000 32190/nbd-deploy-kl9yqp4j/kernel/Image - tftp 0x4c000000 32190/nbd-deploy-kl9yqp4j/initrd/initramfs-netboot-image-h3ulcb.ext4.gz - setenv initrd_size ${filesize} - tftp 0x48000000 32190/nbd-deploy-kl9yqp4j/dtb/r8a77951-agl-refhw.dtb - setenv bootargs 'console=ttySC0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61996 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' - booti 0x48080000 0x4c000000:${initrd_size} 0x48000000 end: 2.2 bootloader-overlay (duration 00:00:00) [common] case: bootloader-overlay
case_id: 3885657
definition: lava
duration: 0.02
extra: ...
level: 2.2
namespace: common
result: pass
start: 2.3 connect-device (timeout 00:20:00) [common] [common] connect-device Connecting to device using 'telnet 127.0.0.1 63004' Setting prompt string to ['lava-test: # '] end: 2.3 connect-device (duration 00:00:03) [common] start: 2.4 uboot-commands (timeout 00:19:57) [common] start: 2.4.1 reset-device (timeout 00:19:57) [common] start: 2.4.1.1 pdu-reboot (timeout 00:19:57) [common] Calling: 'nice' '/usr/local/bin/acme-cli' '-s' '192.168.66.2' 'reset' '8' >> Success >> Success Returned 0 in 4 seconds end: 2.4.1.1 pdu-reboot (duration 00:00:05) [common] case: pdu-reboot
case_id: 3885658
definition: lava
duration: 4.64
extra: ...
level: 2.4.1.1
namespace: common
result: pass
end: 2.4.1 reset-device (duration 00:00:05) [common] start: 2.4.2 bootloader-interrupt (timeout 00:19:52) [common] Setting prompt string to ['Hit any key to stop autoboot'] bootloader-interrupt: Wait for prompt ['Hit any key to stop autoboot'] (timeout 00:20:00) Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. [ 0.000150] NOTICE: BL2: R-Car H3 Initial Program Loader(CA57) [ 0.004586] NOTICE: BL2: Initial Program Loader(Rev.2.0.6) [ 0.010119] NOTICE: BL2: PRR is R-Car H3 Ver.3.0 [ 0.014781] NOTICE: BL2: Board is unknown Rev.--- [ 0.019553] NOTICE: BL2: Boot device is eMMC(50MHz x8) [ 0.024722] NOTICE: BL2: LCM state is CM [ 0.028763] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53 [ 0.034739] NOTICE: BL2: CH0: 0x400000000 - 0x47fffffff, 2 GiB [ 0.040600] NOTICE: BL2: CH1: 0x500000000 - 0x57fffffff, 2 GiB [ 0.046475] NOTICE: BL2: CH2: 0x600000000 - 0x67fffffff, 2 GiB [ 0.052350] NOTICE: BL2: CH3: 0x700000000 - 0x77fffffff, 2 GiB [ 0.058267] NOTICE: BL2: DDR3200(rev.0.40) [ 0.073570] NOTICE: BL2: [COLD_BOOT] [ 0.083101] NOTICE: BL2: DRAM Split is 4ch(DDR f) [ 0.086400] NOTICE: BL2: QoS is default setting(rev.0.11) [ 0.091844] NOTICE: BL2: DRAM refresh interval 1.95 usec [ 0.097200] NOTICE: BL2: Periodic Write DQ Training [ 0.114658] NOTICE: BL2: v1.5(release):af9f429a-dirty [ 0.118302] NOTICE: BL2: Built : 02:23:33, Feb 7 2020 [ 0.123490] NOTICE: BL2: Normal boot [ 0.127125] NOTICE: BL2: eMMC boot from partition 1 [ 0.133673] NOTICE: BL2: Load dst=0xe6325100 src=(p:1)0x30000(384) len=0x200(1) [ 0.139789] NOTICE: BL2: Load dst=0x43f00000 src=(p:1)0x30400(386) len=0x1800(12) [ 0.147389] NOTICE: BL2: Load dst=0x44000000 src=(p:1)0x40000(512) len=0x10000(128) [ 0.156366] NOTICE: BL2: Load dst=0x44100000 src=(p:1)0x200000(4096) len=0x100000(2048) [ 0.187331] NOTICE: BL2: Load dst=0x50000000 src=(p:2)0x0(0) len=0x100000(2048) [ 0.216038] NOTICE: BL2: Booting BL31 U-Boot 2018.09 (May 10 2019 - 09:16:29 +0000) CPU: Renesas Electronics R8A7795 rev 3.0 Model: Renesas Salvator-XS board based on r8a7795 ES3.0+ with 8GiB (4 x 2 GiB) DRAM: 7.9 GiB Bank #0: 0x048000000 - 0x0bfffffff, 1.9 GiB Bank #1: 0x500000000 - 0x57fffffff, 2 GiB Bank #2: 0x600000000 - 0x67fffffff, 2 GiB Bank #3: 0x700000000 - 0x77fffffff, 2 GiB MMC: sd@ee100000: 0, sd@ee140000: 1, sd@ee160000: 2 Loading Environment from MMC... OK In: serial@e6e88000 Out: serial@e6e88000 Err: serial@e6e88000 Net: eth0: ethernet@e6800000 Hit any key to stop autoboot: 3 end: 2.4.2 bootloader-interrupt (duration 00:00:01) [common] start: 2.4.3 bootloader-commands (timeout 00:19:51) [common] Setting prompt string to ['=>'] bootloader-commands: Wait for prompt ['=>'] (timeout 00:19:51)  0 Setting prompt string to ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] setenv autoload no => setenv autoload no bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:51) setenv autoload no setenv initrd_high 0xffffffff => setenv initrd_high 0xffffffff bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:51) setenv initrd_high 0xffffffff setenv fdt_high 0xffffffff => setenv fdt_high 0xffffffff bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:50) setenv fdt_high 0xffffffff dhcp => dhcp bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:50) dhcp ethernet@e6800000 Waiting for PHY auto negotiation to complete...... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.66.11 (1302 ms) setenv serverip 192.168.66.1 => setenv serverip 192.168.66.1 bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:43) setenv serverip 192.168.66.1 tftp 0x48080000 32190/nbd-deploy-kl9yqp4j/kernel/Image => tftp 0x48080000 32190/nbd-deploy-kl9yqp4j/kernel/Image bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:43) tftp 0x48080000 32190/nbd-deploy-kl9yqp4j/kernel/Image Using ethernet@e6800000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.11 Filename '32190/nbd-deploy-kl9yqp4j/kernel/Image'. Load address: 0x48080000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################## 2.1 MiB/s done Bytes transferred = 39076352 (2544200 hex) tftp 0x4c000000 32190/nbd-deploy-kl9yqp4j/initrd/initramfs-netboot-image-h3ulcb.ext4.gz => tftp 0x4c000000 32190/nbd-deploy-kl9yqp4j/initrd/initramfs-netboot-image-h3ulcb.ext4.gz bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:24) tftp 0x4c000000 32190/nbd-deploy-kl9yqp4j/initrd/initramfs-netboot-image-h3ulcb.ext4.gz Using ethernet@e6800000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.11 Filename '32190/nbd-deploy-kl9yqp4j/initrd/initramfs-netboot-image-h3ulcb.ext4.gz'. Load address: 0x4c000000 Loading: *################################################################# ################################################################# ########### 2.8 MiB/s done Bytes transferred = 2057818 (1f665a hex) setenv initrd_size ${filesize} => setenv initrd_size ${filesize} bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:24) setenv initrd_size ${filesize} tftp 0x48000000 32190/nbd-deploy-kl9yqp4j/dtb/r8a77951-agl-refhw.dtb => tftp 0x48000000 32190/nbd-deploy-kl9yqp4j/dtb/r8a77951-agl-refhw.dtb bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:23) tftp 0x48000000 32190/nbd-deploy-kl9yqp4j/dtb/r8a77951-agl-refhw.dtb Using ethernet@e6800000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.11 Filename '32190/nbd-deploy-kl9yqp4j/dtb/r8a77951-agl-refhw.dtb'. Load address: 0x48000000 Loading: *####### 2.4 MiB/s done Bytes transferred = 88958 (15b7e hex) setenv bootargs 'console=ttySC0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61996 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' =>setenv bootargs 'console=ttySC0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61996 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' bootloader-commands: Wait for prompt ['=>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:23) setenv bootargs 'console=ttySC0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61996 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' booti 0x48080000 0x4c000000:${initrd_size} 0x48000000 => booti 0x48080000 0x4c000000:${initrd_size} 0x48000000 Setting prompt string to ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] bootloader-commands: Wait for prompt ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:23) booti 0x48080000 0x4c000000:${initrd_size} 0x48000000 ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Ramdisk to bfc0e000, end bfe0465a ... OK Loading Device Tree to 00000000bfbf5000, end 00000000bfc0db7d ... OK Starting kernel ... end: 2.4.3 bootloader-commands (duration 00:00:28) [common] start: 2.4.4 auto-login-action (timeout 00:19:23) [common] Setting prompt string to ['Linux version [0-9]'] Setting prompt string to ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] auto-login-action: Wait for prompt ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:20:00) [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd073] [ 0.000000] Linux version 5.10.41-yocto-standard (oe-user@oe-host) (aarch64-agl-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Jan 30 17:33:20 UTC 2023 [ 0.000000] Machine model: AGL Reference Hardware based on r8a77951 ES3.0+ with 8GiB (4 x 2 GiB) [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000057000000, size 16 MiB start: 2.4.4.1 login-action (timeout 00:19:22) [common] The string '/ #' does not look like a typical prompt and could match status messages instead. Please check the job log files and use a prompt string which matches the actual prompt string more closely. Setting prompt string to ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing'] Using line separator: #'\n'# Waiting for the login prompt Parsing kernel messages ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing', 'root@h3ulcb:~', 'h3ulcb:~#', '/ #', 'login:', 'Login incorrect'] [login-action] Waiting for messages, (timeout 00:19:22) [ 0.000000] OF: reserved mem: initialized node linux,adsp@57000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000058000000, size 384 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma@58000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000070000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,multimedia@70000000, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000048000000-0x000000077fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x77efdfb00-0x77efe1fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000048000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000077fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000048000000-0x0000000053ffffff] [ 0.000000] node 0: [mem 0x0000000054000000-0x0000000056ffffff] [ 0.000000] node 0: [mem 0x0000000057000000-0x00000000bfffffff] [ 0.000000] node 0: [mem 0x0000000500000000-0x000000057fffffff] [ 0.000000] node 0: [mem 0x0000000600000000-0x000000067fffffff] [ 0.000000] node 0: [mem 0x0000000700000000-0x000000077fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000048000000-0x000000077fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS resident on physical CPU 0x0 [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 33 pages/cpu s94296 r8192 d32680 u135168 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2032128 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttySC0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61996 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000bbbf5000-0x00000000bfbf5000] (64MB) [ 0.000000] Memory: 7268892K/8257536K available (17600K kernel code, 3792K rwdata, 9264K rodata, 7360K init, 574K bss, 316900K reserved, 671744K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f102f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x384/0x548 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec02923e, max_idle_ns: 440795202125 ns [ 0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255496ns [ 0.000161] Console: colour dummy device 80x25 [ 0.000247] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333) [ 0.000259] pid_max: default: 32768 minimum: 301 [ 0.000315] LSM: Security Framework initializing [ 0.000342] SELinux: Initializing. [ 0.000385] LSM support for eBPF active [ 0.000453] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000498] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002038] rcu: Hierarchical SRCU implementation. [ 0.003691] Detected Renesas R-Car Gen3 r8a7795 ES3.0 [ 0.005690] EFI services will not be available. [ 0.006026] smp: Bringing up secondary CPUs ... [ 0.006500] Detected PIPT I-cache on CPU1 [ 0.006555] CPU1: Booted secondary processor 0x0000000001 [0x411fd073] [ 0.007044] Detected PIPT I-cache on CPU2 [ 0.007070] CPU2: Booted secondary processor 0x0000000002 [0x411fd073] [ 0.007519] Detected PIPT I-cache on CPU3 [ 0.007542] CPU3: Booted secondary processor 0x0000000003 [0x411fd073] [ 0.007991] CPU features: detected: ARM erratum 845719 [ 0.008004] Detected VIPT I-cache on CPU4 [ 0.008051] CPU4: Booted secondary processor 0x0000000100 [0x410fd034] [ 0.008540] Detected VIPT I-cache on CPU5 [ 0.008568] CPU5: Booted secondary processor 0x0000000101 [0x410fd034] [ 0.009035] Detected VIPT I-cache on CPU6 [ 0.009062] CPU6: Booted secondary processor 0x0000000102 [0x410fd034] [ 0.009506] Detected VIPT I-cache on CPU7 [ 0.009532] CPU7: Booted secondary processor 0x0000000103 [0x410fd034] [ 0.009612] smp: Brought up 1 node, 8 CPUs [ 0.009637] SMP: Total of 8 processors activated. [ 0.009643] CPU features: detected: 32-bit EL0 Support [ 0.009649] CPU features: detected: CRC32 instructions [ 0.009654] CPU features: detected: 32-bit EL1 Support [ 0.022887] CPU: All CPU(s) started at EL2 [ 0.022926] alternatives: patching kernel code [ 0.023985] devtmpfs: initialized [ 0.031401] KASLR disabled due to lack of seed [ 0.031539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.031552] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.040201] pinctrl core: initialized pinctrl subsystem [ 0.041638] DMI not present or invalid. [ 0.042012] NET: Registered protocol family 16 [ 0.042960] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.043131] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.043421] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.043458] audit: initializing netlink subsys (disabled) [ 0.043630] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.044730] thermal_sys: Registered thermal governor 'power_allocator' [ 0.045247] cpuidle: using governor menu [ 0.045419] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.045542] ASID allocator initialised with 65536 entries [ 0.046759] Serial: AMBA PL011 UART driver [ 0.089404] sh-pfc e6060000.pinctrl: r8a77951_pfc support registered [ 0.103937] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.103944] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.103950] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.103954] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.104927] cryptd: max_cpu_qlen set to 1000 [ 0.107145] ACPI: Interpreter disabled. [ 0.110917] rcar-avs: use avs value: 0 [ 0.110927] rcar-avs: cpu@0 is running with: opp_table0 [ 0.110935] rcar-avs: cpu@1 is running with: opp_table0 [ 0.110941] rcar-avs: cpu@2 is running with: opp_table0 [ 0.110948] rcar-avs: cpu@3 is running with: opp_table0 [ 0.111026] rcar-avs: gsx@fd000000 is running with: gsx_opp_table0 [ 0.112412] iommu: Default domain type: Translated [ 0.112952] ipmmu-vmsa e67b0000.iommu: IPMMU context 0 is reserved [ 0.113901] vgaarb: loaded [ 0.114099] SCSI subsystem initialized [ 0.114353] usbcore: registered new interface driver usbfs [ 0.114377] usbcore: registered new interface driver hub [ 0.114400] usbcore: registered new device driver usb [ 0.117787] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 400000 Hz [ 0.118297] mc: Linux media interface: v0.10 [ 0.118316] videodev: Linux video capture interface: v2.00 [ 0.118361] pps_core: LinuxPPS API ver. 1 registered [ 0.118365] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.118374] PTP clock support registered [ 0.118532] EDAC MC: Ver: 3.0.0 [ 0.120361] FPGA manager framework [ 0.120412] Advanced Linux Sound Architecture Driver Initialized. [ 0.120999] clocksource: Switched to clocksource arch_sys_counter [ 0.562460] VFS: Disk quotas dquot_6.6.0 [ 0.562508] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.562676] pnp: PnP ACPI: disabled [ 0.566747] NET: Registered protocol family 2 [ 0.567132] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.569365] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.569458] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.569738] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.570318] TCP: Hash tables configured (established 65536 bind 65536) [ 0.570457] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.570567] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.570785] NET: Registered protocol family 1 [ 0.571116] RPC: Registered named UNIX socket transport module. [ 0.571123] RPC: Registered udp transport module. [ 0.571126] RPC: Registered tcp transport module. [ 0.571130] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.571140] PCI: CLS 0 bytes, default 64 [ 0.571280] Trying to unpack rootfs image as initramfs... [ 0.571459] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.574414] Freeing initrd memory: 2008K [ 0.575293] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.575579] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available [ 0.576189] kvm [1]: IPA Size Limit: 40 bits [ 0.577057] kvm [1]: vgic interrupt IRQ9 [ 0.577238] kvm [1]: Hyp mode initialized successfully [ 0.580406] Initialise system trusted keyrings [ 0.580562] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 0.583961] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.584376] NFS: Registering the id_resolver key type [ 0.584397] Key type id_resolver registered [ 0.584402] Key type id_legacy registered [ 0.584457] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.584463] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.584629] 9p: Installing v9fs 9p2000 file system support [ 0.611524] NET: Registered protocol family 38 [ 0.611534] Key type asymmetric registered [ 0.611541] Asymmetric key parser 'x509' registered [ 0.611575] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.611582] io scheduler mq-deadline registered [ 0.611587] io scheduler kyber registered [ 0.626720] gpio_rcar e6050000.gpio: driving 16 GPIOs [ 0.627029] gpio_rcar e6051000.gpio: driving 29 GPIOs [ 0.627307] gpio_rcar e6052000.gpio: driving 15 GPIOs [ 0.627586] gpio_rcar e6053000.gpio: driving 16 GPIOs [ 0.627859] gpio_rcar e6054000.gpio: driving 18 GPIOs [ 0.628131] gpio_rcar e6055000.gpio: driving 26 GPIOs [ 0.628304] gpio-369 (wlan-pwr-en): hogged as output/high [ 0.628324] gpio-381 (can-1-transceiver-stb): hogged as output/low [ 0.628342] gpio-372 (can-2-transceiver-stb): hogged as output/low [ 0.628470] gpio_rcar e6055400.gpio: driving 32 GPIOs [ 0.628738] gpio_rcar e6055800.gpio: driving 4 GPIOs [ 0.630969] rcar-pcie fe000000.pcie: host bridge /soc/pcie@fe000000 ranges: [ 0.630993] rcar-pcie fe000000.pcie: IO 0x00fe100000..0x00fe1fffff -> 0x0000000000 [ 0.631011] rcar-pcie fe000000.pcie: MEM 0x00fe200000..0x00fe3fffff -> 0x00fe200000 [ 0.631026] rcar-pcie fe000000.pcie: MEM 0x0030000000..0x0037ffffff -> 0x0030000000 [ 0.631037] rcar-pcie fe000000.pcie: MEM 0x0038000000..0x003fffffff -> 0x0038000000 [ 0.631050] rcar-pcie fe000000.pcie: IB MEM 0x0040000000..0x00bfffffff -> 0x0040000000 [ 0.631092] rcar-pcie fe000000.pcie: no pcie3v3 regulator found [ 0.631100] rcar-pcie fe000000.pcie: no pcie1v8 regulator found [ 0.696631] rcar-pcie fe000000.pcie: PCIe link down [ 0.696790] rcar-pcie ee800000.pcie: host bridge /soc/pcie@ee800000 ranges: [ 0.696808] rcar-pcie ee800000.pcie: IO 0x00ee900000..0x00ee9fffff -> 0x0000000000 [ 0.696823] rcar-pcie ee800000.pcie: MEM 0x00eea00000..0x00eebfffff -> 0x00eea00000 [ 0.696836] rcar-pcie ee800000.pcie: MEM 0x00c0000000..0x00c7ffffff -> 0x00c0000000 [ 0.696846] rcar-pcie ee800000.pcie: MEM 0x00c8000000..0x00cfffffff -> 0x00c8000000 [ 0.696858] rcar-pcie ee800000.pcie: IB MEM 0x0040000000..0x00bfffffff -> 0x0040000000 [ 0.696885] rcar-pcie ee800000.pcie: no pcie3v3 regulator found [ 0.696892] rcar-pcie ee800000.pcie: no pcie1v8 regulator found [ 0.760630] rcar-pcie ee800000.pcie: PCIe link down [ 0.762922] EINJ: ACPI disabled. [ 0.794349] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.796741] SuperH (H)SCI(F) driver initialized [ 0.797117] e6540000.serial: ttySC4 at MMIO 0xe6540000 (irq = 44, base_baud = 0) is a hscif [ 0.797274] serial serial0: tty port ttySC4 registered [ 0.797698] e6550000.serial: ttySC3 at MMIO 0xe6550000 (irq = 45, base_baud = 0) is a hscif [ 0.798214] e6560000.serial: ttySC5 at MMIO 0xe6560000 (irq = 46, base_baud = 0) is a hscif [ 0.798780] e6e68000.serial: ttySC1 at MMIO 0xe6e68000 (irq = 134, base_baud = 0) is a scif [ 0.799287] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 135, base_baud = 0) is a scif [ 2.101431] printk: console [ttySC0] enabled [ 2.106150] e6f30000.serial: ttySC2 at MMIO 0xe6f30000 (irq = 136, base_baud = 0) is a scif [ 2.115579] msm_serial: driver initialized [ 2.125321] rcar-dw-hdmi fead0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.135157] rcar-dw-hdmi fead0000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.143336] rcar-dw-hdmi feae0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.153165] rcar-dw-hdmi feae0000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.167936] brd: module loaded [ 2.176558] loop: module loaded [ 2.235091] megasas: 07.714.04.00-rc1 [ 2.243878] libphy: Fixed MDIO Bus: probed [ 2.249047] tun: Universal TUN/TAP device driver, 1.6 [ 2.254932] thunder_xcv, ver 1.0 [ 2.258173] thunder_bgx, ver 1.0 [ 2.261404] nicpf, ver 1.0 [ 2.265457] hclge is initializing [ 2.268769] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.275959] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.281271] e1000: Intel(R) PRO/1000 Network Driver [ 2.286128] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.291866] e1000e: Intel(R) PRO/1000 Network Driver [ 2.296807] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.302717] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.308094] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.313659] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 2.319896] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 2.326170] sky2: driver version 1.30 [ 2.331073] libphy: ravb_mii: probed [ 2.337274] ravb e6800000.ethernet eth0: Base address at 0xe6800000, 00:80:45:1b:40:7f, IRQ 129. [ 2.347384] VFIO - User Level meta-driver version: 0.3 [ 2.354490] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.361001] ehci-pci: EHCI PCI platform driver [ 2.365446] ehci-platform: EHCI generic platform driver [ 2.397066] ehci-platform ee080100.usb: EHCI Host Controller [ 2.402716] ehci-platform ee080100.usb: new USB bus registered, assigned bus number 1 [ 2.410576] ehci-platform ee080100.usb: irq 182, io mem 0xee080100 [ 2.429006] ehci-platform ee080100.usb: USB 2.0 started, EHCI 1.10 [ 2.435552] hub 1-0:1.0: USB hub found [ 2.439309] hub 1-0:1.0: 1 port detected [ 2.443658] ehci-platform ee0a0100.usb: EHCI Host Controller [ 2.449317] ehci-platform ee0a0100.usb: new USB bus registered, assigned bus number 2 [ 2.457177] ehci-platform ee0a0100.usb: irq 183, io mem 0xee0a0100 [ 2.477005] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10 [ 2.483444] hub 2-0:1.0: USB hub found [ 2.487194] hub 2-0:1.0: 1 port detected [ 2.491485] ehci-platform ee0c0100.usb: EHCI Host Controller [ 2.497143] ehci-platform ee0c0100.usb: new USB bus registered, assigned bus number 3 [ 2.504986] ehci-platform ee0c0100.usb: irq 184, io mem 0xee0c0100 [ 2.525004] ehci-platform ee0c0100.usb: USB 2.0 started, EHCI 1.10 [ 2.531439] hub 3-0:1.0: USB hub found [ 2.535189] hub 3-0:1.0: 1 port detected [ 2.565041] ehci-platform ee0e0100.usb: EHCI Host Controller [ 2.570684] ehci-platform ee0e0100.usb: new USB bus registered, assigned bus number 4 [ 2.578514] ehci-platform ee0e0100.usb: irq 185, io mem 0xee0e0100 [ 2.597002] ehci-platform ee0e0100.usb: USB 2.0 started, EHCI 1.10 [ 2.603449] hub 4-0:1.0: USB hub found [ 2.607198] hub 4-0:1.0: 1 port detected [ 2.611478] ehci-orion: EHCI orion driver [ 2.615714] ehci-exynos: EHCI Exynos driver [ 2.620004] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.626186] ohci-pci: OHCI PCI platform driver [ 2.630661] ohci-platform: OHCI generic platform driver [ 2.636065] ohci-platform ee080000.usb: Generic Platform OHCI controller [ 2.642751] ohci-platform ee080000.usb: new USB bus registered, assigned bus number 5 [ 2.650589] ohci-platform ee080000.usb: irq 182, io mem 0xee080000 [ 2.743408] hub 5-0:1.0: USB hub found [ 2.747158] hub 5-0:1.0: 1 port detected [ 2.751438] ohci-platform ee0a0000.usb: Generic Platform OHCI controller [ 2.758134] ohci-platform ee0a0000.usb: new USB bus registered, assigned bus number 6 [ 2.765981] ohci-platform ee0a0000.usb: irq 183, io mem 0xee0a0000 [ 2.859396] hub 6-0:1.0: USB hub found [ 2.863145] hub 6-0:1.0: 1 port detected [ 2.867394] ohci-platform ee0c0000.usb: Generic Platform OHCI controller [ 2.874089] ohci-platform ee0c0000.usb: new USB bus registered, assigned bus number 7 [ 2.881937] ohci-platform ee0c0000.usb: irq 184, io mem 0xee0c0000 [ 2.975385] hub 7-0:1.0: USB hub found [ 2.979134] hub 7-0:1.0: 1 port detected [ 2.983383] ohci-platform ee0e0000.usb: Generic Platform OHCI controller [ 2.990087] ohci-platform ee0e0000.usb: new USB bus registered, assigned bus number 8 [ 2.997931] ohci-platform ee0e0000.usb: irq 185, io mem 0xee0e0000 [ 3.091394] hub 8-0:1.0: USB hub found [ 3.095143] hub 8-0:1.0: 1 port detected [ 3.099412] ohci-exynos: OHCI Exynos driver [ 3.104227] xhci-hcd ee000000.usb: xHCI Host Controller [ 3.109457] xhci-hcd ee000000.usb: new USB bus registered, assigned bus number 9 [ 3.132692] xhci-hcd ee000000.usb: hcc params 0x014051ce hci version 0x100 quirks 0x0000000000830410 [ 3.141805] xhci-hcd ee000000.usb: irq 180, io mem 0xee000000 [ 3.147986] hub 9-0:1.0: USB hub found [ 3.151738] hub 9-0:1.0: 1 port detected [ 3.155801] xhci-hcd ee000000.usb: xHCI Host Controller [ 3.161011] xhci-hcd ee000000.usb: new USB bus registered, assigned bus number 10 [ 3.168462] xhci-hcd ee000000.usb: Host supports USB 3.0 SuperSpeed [ 3.174745] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.183167] hub 10-0:1.0: USB hub found [ 3.187003] hub 10-0:1.0: 1 port detected [ 3.191772] usbcore: registered new interface driver usb-storage [ 3.197824] usbcore: registered new interface driver usbserial_generic [ 3.204331] usbserial: USB Serial support registered for generic [ 3.210346] usbcore: registered new interface driver cp210x [ 3.215902] usbserial: USB Serial support registered for cp210x [ 3.223459] renesas_usbhs e6590000.usb: host probed [ 3.228330] renesas_usbhs e6590000.usb: no transceiver found [ 3.234037] renesas_usbhs e6590000.usb: gadget probed [ 3.239229] renesas_usbhs e6590000.usb: probed [ 3.244043] renesas_usbhs e659c000.usb: host probed [ 3.248911] renesas_usbhs e659c000.usb: no transceiver found [ 3.254616] renesas_usbhs e659c000.usb: gadget probed [ 3.259792] renesas_usbhs e659c000.usb: probed [ 3.265260] renesas_usb3 ee020000.usb: probed with phy [ 3.272468] i2c /dev entries driver [ 3.289073] cs2000-cp 2-004f: revision - C1 [ 3.293301] i2c-rcar e6510000.i2c: probed [ 3.298157] i2c-rcar e66d0000.i2c: probed [ 3.301032] usb usb7-port1: over-current condition [ 3.304416] vc5 4-006a: Invalid clock output configuration (04) [ 3.312931] vc5 4-006a: Invalid clock output configuration (04) [ 3.318991] vc5 4-006a: Invalid clock output configuration (04) [ 3.325002] vc5 4-006a: Invalid clock output configuration (04) [ 3.330945] i2c-rcar e66d8000.i2c: probed [ 3.335611] i2c-rcar e66e0000.i2c: probed [ 3.340470] usbcore: registered new interface driver i2c-tiny-usb [ 3.346999] adv748x 2-0070: Endpoint /soc/i2c@e6510000/video-receiver@70/port@8/endpoint on port 8 [ 3.355945] adv748x 2-0070: Endpoint /soc/i2c@e6510000/video-receiver@70/port@a/endpoint on port 10 [ 3.366128] adv748x 2-0070: chip found @ 0xe0 revision 2143 [ 3.390810] random: fast init done [ 3.464595] adv748x 2-0071: Endpoint /soc/i2c@e6510000/video-receiver@71/port@8/endpoint on port 8 [ 3.473541] adv748x 2-0071: Endpoint /soc/i2c@e6510000/video-receiver@71/port@a/endpoint on port 10 [ 3.483697] adv748x 2-0071: chip found @ 0xe2 revision 2143 [ 3.493021] usb 9-1: new high-speed USB device number 2 using xhci-hcd [ 3.583640] rcar-csi2 feaa0000.csi2: 4 lanes found [ 3.588695] rcar-csi2 feab0000.csi2: 4 lanes found [ 3.597950] rcar-vin e6ef0000.video: Device registered as video0 [ 3.604028] rcar-vin e6ef1000.video: Device registered as video1 [ 3.610105] rcar-vin e6ef2000.video: Device registered as video2 [ 3.616164] rcar-vin e6ef3000.video: Device registered as video3 [ 3.622220] rcar-vin e6ef4000.video: Device registered as video4 [ 3.628268] rcar-vin e6ef5000.video: Device registered as video5 [ 3.634321] rcar-vin e6ef6000.video: Device registered as video6 [ 3.640371] rcar-vin e6ef7000.video: Device registered as video7 [ 3.648861] rcar_gen3_thermal e6198000.thermal: is using pseudo fixed FUSE values [ 3.660953] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 1 trip points [ 3.672160] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 1 trip points [ 3.683262] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 3 trip points [ 3.695000] sdhci: Secure Digital Host Controller Interface driver [ 3.701190] sdhci: Copyright(c) Pierre Ossman [ 3.706305] Synopsys Designware Multimedia Card Interface Driver [ 3.706769] renesas_sdhi_internal_dmac ee140000.mmc: Adding to iommu group 0 [ 3.713594] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.719325] renesas_sdhi_internal_dmac ee140000.mmc: Using IPMMU context 1 [ 3.732685] ledtrig-cpu: registered to indicate activity on CPUs [ 3.740227] usbcore: registered new interface driver usbhid [ 3.745776] usbhid: USB HID core driver [ 3.780688] renesas_sdhi_internal_dmac ee140000.mmc: mmc0 base at 0x00000000ee140000, max clock rate 200 MHz [ 3.860963] mmc0: new HS400 MMC card at address 0001 [ 3.866609] mmcblk0: mmc0:0001 CJUD4R 59.6 GiB [ 3.871503] mmcblk0boot0: mmc0:0001 CJUD4R partition 1 31.9 MiB [ 3.877802] mmcblk0boot1: mmc0:0001 CJUD4R partition 2 31.9 MiB [ 3.883995] mmcblk0rpmb: mmc0:0001 CJUD4R partition 3 4.00 MiB, chardev (508:0) [ 3.892919] mmcblk0: p1 p2 [ 3.897875] st_lsm6dsx_i2c 3-006a: mounting matrix not found: using identity... [ 3.907898] optee: probing for conduit method. [ 3.912353] optee: revision 3.1 (19fb6dcb) [ 3.912781] optee driver R-Car Rev.1.0.11 [ 3.921234] optee: initialized driver [ 3.926325] usbcore: registered new interface driver snd-usb-audio [ 3.942565] rcar_sound ec500000.sound: probed [ 3.947475] NET: Registered protocol family 17 [ 3.952040] 9pnet: Installing 9P2000 support [ 3.956359] Key type dns_resolver registered [ 3.961028] registered taskstats version 1 [ 3.965114] Loading compiled-in X.509 certificates [ 3.981595] thermal emergency: set temperature to 110 celsius [ 3.987512] thermal emergency: shutdown target cpus 1-7 [ 3.992714] thermal emergency: freq scaled target cpus 0 [ 3.998355] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs [ 4.009862] [drm] Initialized rcar-du 1.0.0 20130110 for feb00000.display on minor 0 [ 4.017583] [drm] Device feb00000.display probed [ 4.394700] Console: switching to colour frame buffer device 240x67 [ 4.417122] rcar-du feb00000.display: [drm] fb0: rcar-dudrmfb frame buffer device [ 4.429890] cpu cpu0: EM: created perf domain [ 4.434655] cpu cpu4: EM: created perf domain [ 4.493046] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.566991] renesas_sdhi_internal_dmac ee160000.mmc: mmc2 base at 0x00000000ee160000, max clock rate 50 MHz [ 4.639719] Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: *-skew-ps values should be used only with phy-mode = \"rgmii\" [ 4.655696] Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=190) [ 11.403204] ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 11.425006] Sending DHCP requests .., OK [ 13.517030] IP-Config: Got DHCP answer from 192.168.66.1, my address is 192.168.66.11 [ 13.524825] IP-Config: Complete: [ 13.528038] device=eth0, hwaddr=00:80:45:1b:40:7f, ipaddr=192.168.66.11, mask=255.255.255.0, gw=192.168.66.1 [ 13.538250] host=192.168.66.11, domain=, nis-domain=(none) [ 13.544139] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= [ 13.544143] nameserver0=10.1.1.1 [ 13.554357] ALSA device list: [ 13.557321] #0: ak4613 [ 13.560073] Waiting 7 sec before mounting root device... [ 20.701206] RAMDISK: gzip image found at block 0 [ 20.806740] EXT4-fs (ram0): mounted filesystem with ordered data mode. Opts: (null) [ 20.814422] VFS: Mounted root (ext4 filesystem) on device 1:0. [ 20.820343] devtmpfs: mounted [ 20.826534] Freeing unused kernel memory: 7360K [ 20.837148] Run /sbin/init as init process ________________________________________________________________________________ ___ ________ _ __ __ __ __ / | / ____/ / / | / /__ / /_/ /_ ____ ____ / /_ / /| |/ / __/ / ______ / |/ / _ \/ __/ __ \/ __ \/ __ \/ __/ / ___ / /_/ / /___ /_____/ / /| / __/ /_/ /_/ / /_/ / /_/ / /_ /_/ |_\____/_____/ /_/ |_/\___/\__/_.___/\____/\____/\__/ ________________________________________________________________________________ /sbin/init[1]: starting initrd script /sbin/init[1]: mounting FS: proc /proc /sbin/init[1]: mounting FS: sysfs /sys /sbin/init[1]: mounting FS: devtmpfs /dev /sbin/init[1]: /dev (devtmpfs) already mounted /sbin/init[1]: mounting FS: devpts /dev/pts /sbin/init[1]: mounting FS: tmpfs /dev/shm /sbin/init[1]: mounting FS: tmpfs /tmp /sbin/init[1]: mounting FS: tmpfs /run /sbin/init[1]: NBD parameters: device /dev/nbd0, server 192.168.66.1:61996 /sbin/init[1]: Starting NBD client /sbin/init[1]: NBD client successfully started [ 20.988556] EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) /sbin/init[1]: Moving /dev to new rootfs /sbin/init[1]: Moving /proc to new rootfs /sbin/init[1]: Moving /sys to new rootfs /sbin/init[1]: Moving /tmp to new rootfs /sbin/init[1]: Moving /run to new rootfs /sbin/init[1]: Switching to new rootfs /sbin/init[1]: find_active_interface: first active interface is eth0 /sbin/init[1]: Adjusting Connman command line. Will be: 'connmand -r -n -I eth0' /sbin/init[1]: Unmounting /tmp and /run /sbin/init[1]: Exec'ing systemd ________________________________________________________________________________ ___ ________ ____ __ _ / | / ____/ / / __ )____ ____ / /_(_)___ ____ _ / /| |/ / __/ / / __ / __ \/ __ \/ __/ / __ \/ __ `/ / ___ / /_/ / /___ / /_/ / /_/ / /_/ / /_/ / / / / /_/ / _ _ _ /_/ |_\____/_____/ /_____/\____/\____/\__/_/_/ /_/\__, / (_) (_) (_) _____________________________________________________/____/_____________________ [ 21.621973] random: crng init done [ 22.340997] SELinux: policy capability network_peer_controls=1 [ 22.346939] SELinux: policy capability open_perms=1 [ 22.351881] SELinux: policy capability extended_socket_class=1 [ 22.357770] SELinux: policy capability always_check_network=0 [ 22.363574] SELinux: policy capability cgroup_seclabel=1 [ 22.368944] SELinux: policy capability nnp_nosuid_transition=1 [ 22.374833] SELinux: policy capability genfs_seclabel_symlinks=0 [ 22.445196] audit: type=1403 audit(22.443:2): auid=4294967295 ses=4294967295 lsm=selinux res=1 [ 22.472383] systemd[1]: Successfully loaded SELinux policy in 439.899ms. [ 22.634863] systemd[1]: System time before build time, advancing clock. [ 22.803367] audit: type=1400 audit(1675100000.163:3): avc: denied { confidentiality } for pid=1 comm=\"systemd\" lockdown_reason=\"use of tracefs\" scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=lockdown permissive=1 [ 22.803822] NET: Registered protocol family 10 [ 22.830688] Segment Routing with IPv6 [ 22.930997] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 33.038ms. [ 22.995511] systemd[1]: systemd 250.5+ running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 23.027151] systemd[1]: Detected architecture arm64. Welcome to Automotive Grade Linux 15.90.0+snapshot-65dafea22018052fe7b2e17e6e4d7eb754224d38 (pike)! [ 23.091100] systemd[1]: Hostname set to <h3ulcb>. [ 23.119660] systemd[1]: Initializing machine ID from random generator. [ 23.625977] systemd[1]: Queued start job for default target Graphical Interface. [ 23.692594] systemd[1]: Created slice Slice /system/agl-session. [ OK ] Created slice Slice /system/agl-session. [ 23.714790] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 23.734507] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 23.754511] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 23.774319] systemd[1]: Created slice Slice /system/wireplumber. [ OK ] Created slice Slice /system/wireplumber. [ 23.794013] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 23.813589] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 23.837412] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 23.861203] systemd[1]: Reached target Host and Network Name Lookups. [ OK ] Reached target Host and Network Name Lookups. [ 23.881061] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 23.897083] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 23.917056] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 23.933107] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 23.955509] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 23.973730] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 23.994722] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 24.014896] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 24.034088] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 24.054072] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 24.075553] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 24.093978] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 24.114731] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 24.137546] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 24.160865] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 24.184700] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 24.212857] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 24.245502] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 24.269128] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static Device Nodes... [ 24.296766] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 24.320600] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 24.344554] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 24.369232] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash scre[ 24.378982] fuse: init (API version 7.32) en... [ 24.397308] systemd[1]: Starting SELinux autorelabel service loading... Starting SELinux autorelabel service loading... [ 24.421355] systemd[1]: Starting SELinux init for /dev service loading... Starting SELinux init for /dev service loading... [ 24.457356] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 24.474768] systemd[1]: Starting Journal Service... Starting Journal Service... [ 24.536377] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 24.557789] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 24.582445] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 24.609582] systemd[1]: Started Start psplash boot splash screen. [ 24.613272] EXT4-fs (nbd0): re-mounted. Opts: (null) [ OK ] Started Start psplash boot splash screen. [ 24.631924] audit: type=1400 audit(1675100001.991:4): avc: denied { read } for pid=355 comm=\"systemd-journal\" name=\"machine-id\" dev=\"nbd0\" ino=194 scontext=system_u:system_r:syslogd_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=file permissive=1 [ 24.655346] audit: type=1400 audit(1675100001.991:5): avc: denied { open } for pid=355 comm=\"systemd-journal\" path=\"/etc/machine-id\" dev=\"nbd0\" ino=194 scontext=system_u:system_r:syslogd_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=file permissive=1 [ 24.672544] systemd[1]: Mounted Huge Pages File System. [ 24.679321] audit: type=1130 audit(1675100002.031:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=psplash-start comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Mounted Huge Pages File System. [ 24.717676] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 24.738010] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 24.758015] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ 24.773437] audit: type=1130 audit(1675100002.135:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Mounted Kernel Trace File System. [ OK ] Mounted Temporary Directory /tmp. [ OK ] Finished Create List of Static Device Nodes. [ 24.845262] audit: type=1130 audit(1675100002.207:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Finished Load Kernel Module configfs. [ 24.881386] audit: type=1130 audit(1675100002.243:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@configfs comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ 24.903170] audit: type=1131 audit(1675100002.243:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@configfs comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Finished Load Kernel Module drm. [ 24.937257] audit: type=1130 audit(1675100002.299:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@drm comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished SELinux autorelabel service loading. [ OK ] Finished SELinux init for /dev service loading. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Remount Root and Kernel File Systems. Mounting FUSE Control File System... Mounting Kernel Configuration File System... [ OK ] Started Start psplash-systemd progress communication helper. Starting Flush Journal to Persistent Storage... Starting Apply Kernel Variables... [ 25.147755] systemd-journald[355]: Received client request to flush runtime journal. Starting Create System Users... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /var/volatile... Starting Wait for udev To Complete Device Initialization... Starting Rule-based Manager for Device Events and Files... [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting SELinux resolv.conf relabeling... Starting SELinux init service loading... Starting Create Volatile Files and Directories... [ OK ] Finished Load/Save Random Seed. [ OK ] Finished SELinux resolv.conf relabeling. [ OK ] Finished SELinux init service loading. Starting Generated file SELinux relabeling... [ OK ] Finished Create Volatile Files and Directories. Starting Security Auditing Service... Starting Rebuild Journal Catalog... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Generated file SELinux relabeling. [ OK ] Finished Rebuild Journal Catalog. [ OK ] Started Security Auditing Service. Starting Record System Boot/Shutdown in UTMP... [ OK ] Finished Record System Boot/Shutdown in UTMP. [ OK ] Reached target Hardware activated USB gadget. [ 26.509564] at24 7-0050: supply vcc not found, using dummy regulator [ 26.517169] at24 7-0050: 128 byte br24t01 EEPROM, writable, 8 bytes/write [ 26.553639] CAN device driver interface [ 26.622217] rcar_canfd e66c0000.can: can_clk rate is 19968000 [ 26.628544] rcar_canfd e66c0000.can: device registered (channel 0) [ 26.634857] rcar_canfd e66c0000.can: can_clk rate is 19968000 [ 26.641102] rcar_canfd e66c0000.can: device registered (channel 1) [ 26.647295] rcar_canfd e66c0000.can: global operational state (clk 0, fdmode 1) [ 26.702872] ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 [ 26.800250] ccree e6601000.crypto: ARM ccree device initialized [ 26.817090] Bluetooth: Core ver 2.22 [ 26.821130] NET: Registered protocol family 31 [ 26.826604] Bluetooth: HCI device and connection manager initialized [ 26.835756] Bluetooth: HCI socket layer initialized [ 26.840931] Bluetooth: L2CAP socket layer initialized [ 26.847167] Bluetooth: SCO socket layer initialized [ 26.971083] Bluetooth: HCI UART driver ver 2.3 [ 26.975602] Bluetooth: HCI UART protocol H4 registered [ 26.980746] Bluetooth: HCI UART protocol BCSP registered [ OK ] Listeni[ 26.986230] Bluetooth: HCI UART protocol LL registered ng on Load/Save [ 26.993235] Bluetooth: HCI UART protocol Broadcom registered RF Kill Switch S[ 26.999814] Bluetooth: HCI UART protocol QCA registered tatus /dev/rfkill Watch. [ 27.014212] usb 9-1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state Starting SELinux resolv.conf relabeling... Starting SELinux autorelabel service loading... [ 27.088796] usb 9-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 27.098125] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) Starting SELinux init service loading... Starting SELinux init for /dev service loading... Starting Load/Save RF Kill Switch Statu[ 27.151719] i2c i2c-10: Added multiplexed i2c bus 11 s... [ 27.157624] rtl2832 10-0010: Realtek RTL2832 successfully attached [ 27.165106] usb 9-1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ OK ] Finished SELinux resolv.conf relabeling. [ OK ] Finished SELinux autorelabel service loading. [ 27.209059] Bluetooth: hci0: Failed to get CTS [ OK ] Finished SELinux init service loading. [ OK ] Started Load/Save RF Kill Switch Status. [ 27.238229] r820t 11-001a: creating new instance [ 27.250510] r820t 11-001a: Rafael Micro r820t successfully identified Starting SELinux resolv.conf relabeling... Starting SELinux autorelabel se[ 27.284827] rtl2832_sdr rtl2832_sdr.8.auto: Registered as swradio0 rvice loading...[ 27.292362] rtl2832_sdr rtl2832_sdr.8.auto: Realtek RTL2832 SDR attached [ 27.299992] rtl2832_sdr rtl2832_sdr.8.auto: SDR API is still slightly experimental and functionality changes may follow Startin[ 27.319991] Registered IR keymap rc-empty g SELinux init s[ 27.325322] rc rc0: Realtek RTL2832U reference design as /devices/platform/soc/ee000000.usb/usb9/9-1/rc/rc0 ervice loading..[ 27.336274] input: Realtek RTL2832U reference design as /devices/platform/soc/ee000000.usb/usb9/9-1/rc/rc0/input0 . [ 27.348859] usb 9-1: dvb_usb_v2: schedule remote query interval to 200 msecs [ 27.365603] usb 9-1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ OK ] Finishe[ 27.376093] usbcore: registered new interface driver dvb_usb_rtl28xxu d SELinux init for /dev service loading. [ OK ] Finished SELinux resolv.conf relabeling. [ OK ] Finished SELinux autorelabel service loading. [ OK ] Finished SELinux init service loading. [ OK ] Finished Wait for udev To Complete Device Initialization. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [* ] A start job is running for Rebuild …namic Linker Cache (2s / no limit) M[K[** ] A start job is running for Rebuild …namic Linker Cache (2s / no limit) M[K[*** ] A start job is running for Rebuild …namic Linker Cache (3s / no limit) M[K[ *** ] A start job is running for Rebuild …namic Linker Cache (3s / no limit) M[K[ *** ] A start job is running for Rebuild …namic Linker Cache (4s / no limit) M[K[ OK ] Finished Rebuild Dynamic Linker Cache. [K Starting Update is Completed... [ OK ] Finished Update is Completed. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timer Units. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on GPS (Global Positioning System) Daemon Sockets. [ OK ] Listening on mpd.socket. Starting PipeWire Multimedia System Socket... Starting sshd.socket... [ OK ] Listening on PipeWire Multimedia System Socket. [ OK ] Listening on sshd.socket. [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. Starting Save/Restore Sound Card State... Starting Bluetooth service... Starting CAN interface helper... Starting D-Bus System Message Bus... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... Starting Telephony service... [ OK ] Started PipeWire Multimedia Service. Starting User Login Management... Starting Disk Manager... [ OK ] Started Multimedia Service Session Manager. [ OK ] Started Multimedia Service Session Manager (bluetooth). [ OK ] Started Multimedia Service Session Manager (policy). Starting OpenSSH Key Generation... [ OK ] Finished Save/Restore Sound Card State. [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished CAN interface helper. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Reached target Preparation for Network. [ OK ] Reached target Sound Card. Starting Network Configuration... [ 33.708755] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 33.727503] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ OK ] Started D-Bus System Message Bus. Starting Connection service... [ 34.006455] rcar_canfd e66c0000.can can1: bitrate error 0.1% [ 34.014297] rcar_canfd e66c0000.can can0: bitrate error 0.1% [ OK ] Started Network Configuration. [ OK ] Started User Login Management. [ 34.050847] rcar_canfd e66c0000.can can1: incorrect/missing data bit-timing [ OK ] Started Bluetooth service. [ 34.065978] rcar_canfd e66c0000.can can1: open_candev() failed, error -22 [ OK ] Started Telephony service. [ 34.077750] rcar_canfd e66c0000.can can0: incorrect/missing data bit-timing [ 34.084752] rcar_canfd e66c0000.can can0: open_candev() failed, error -22 [ OK ] Reached target Bluetooth Support. [ 34.256942] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 34.262305] Bluetooth: BNEP filters: protocol multicast [ 34.267575] Bluetooth: BNEP socket layer initialized Starting Authorization Manager... Starting Hostname Service... [ OK ] Started Connection service. [ OK ] Reached target Network. [ OK ] Started agl-service-radio.service. [ OK ] Started applaunchd.service. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Eclipse KUKSA.val VIS server. [ OK ] Started agl-service-audiomixer.service. [ OK ] Started agl-service-hvac.service. [ OK ] Started Eclipse KUKSA.val DBC feeder. Starting Permit User Sessions... [ OK ] Finished Permit User Sessions. [ OK ] Started AGL user session. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttySC0. [ OK ] Reached target Login Prompts. [ OK ] Started Authorization Manager. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Hostname Service. [ OK ] Started Disk Manager. [ OK ] Started Automount Disk Manager. [ 35.880576] can: controller area network core [ 35.885859] NET: Registered protocol family 29 [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Record Runlevel Change in UTMP... [ 35.945289] can: raw protocol [ 36.714417] r820t 11-001a: destroying instance [ 36.725320] dvb_usb_v2: 'Realtek RTL2832U reference design:9-1' successfully deinitialized and disconnected [ OK ] Finished Record Runlevel Change in UTMP. Starting Load/Save RF Kill Switch Status... Starting User Database Manager... Starting WPA supplicant... [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Started WPA supplicant. [ OK ] Started User Database Manager. [ 37.279090] usb 9-1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ 37.354663] usb 9-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 37.364106] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ 37.391896] i2c i2c-10: Added multiplexed i2c bus 11 [ 37.396974] rtl2832 10-0010: Realtek RTL2832 successfully attached [ OK ] Created slice U[ 37.412567] usb 9-1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... ser Slice of UID 1001. [ 37.422585] r820t 11-001a: creating new instance [ 37.436177] r820t 11-001a: Rafael Micro r820t successfully identified Starting User Runtime Directory /run/user/1001... [ 37.461192] rtl2832_sdr rtl2832_sdr.8.auto: Registered as swradio0 [ 37.467415] rtl2832_sdr rtl2832_sdr.8.auto: Realtek RTL2832 SDR attached [ 37.478223] rtl2832_sdr rtl2832_sdr.8.auto: SDR API is still slightly experimental and functionality changes may follow [ 37.497922] Registered IR keymap rc-empty [ 37.502374] rc rc0: Realtek RTL2832U reference design as /devices/platform/soc/ee000000.usb/usb9/9-1/rc/rc0 [ 37.513363] input: Realtek RTL2832U reference design as /devices/platform/soc/ee000000.usb/usb9/9-1/rc/rc0/input1 [ 37.533136] usb 9-1: dvb_usb_v2: schedule remote query interval to 200 msecs [ 37.549596] usb 9-1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ OK ] Finished User Runtime Directory /run/user/1001. Starting User Manager for UID 1001... [ 37.806300] r820t 11-001a: destroying instance [ 37.814764] dvb_usb_v2: 'Realtek RTL2832U reference design:9-1' successfully deinitialized and disconnected [ OK ] Started User Manager for UID 1001. [ OK ] Started Session c1 of User agl-driver. Automotive Grade Linux 15.90.0+snapshot-65dafea22018052fe7b2e17e6e4d7eb754224d38 h3ulcb ttySC0 Matched prompt #13: login: case: kernel-messages
case_id: 3885659
definition: lava
duration: 40.12
extra: ...
level: 2.4.4.1
namespace: common
result: pass
Sending username root root h3ulcb login: root Setting prompt string to ['root@h3ulcb:~', 'h3ulcb:~#', '/ #'] login-action: Wait for prompt ['root@h3ulcb:~', 'h3ulcb:~#', '/ #', 'Login incorrect', 'Login timed out'] (timeout 00:18:41) root 7[r[999;999H[6n[ 43.997054] SDHI0 Vcc: disabling [ 44.000278] SDHI3 Vcc: disabling [ 44.003518] wlan-en-regulator: disabling [ 44.007439] SDHI0 VccQ: disabling [ 44.013034] SDHI3 VccQ: disabling Setting prompt string to ['root@h3ulcb:~', 'h3ulcb:~#', '/ #'] end: 2.4.4.1 login-action (duration 00:00:44) [common] case: login-action
case_id: 3885660
definition: lava
duration: 44.49
extra: ...
level: 2.4.4.1
namespace: common
result: pass
end: 2.4.4 auto-login-action (duration 00:00:46) [common] start: 2.4.5 expect-shell-connection (timeout 00:18:37) [common] Setting prompt string to ['root@h3ulcb:~', 'h3ulcb:~#', '/ #'] Forcing a shell prompt, looking for ['root@h3ulcb:~', 'h3ulcb:~#', '/ #'] root@h3ulcb:~# expect-shell-connection: Wait for prompt ['root@h3ulcb:~', 'h3ulcb:~#', '/ #'] (timeout 00:20:00) Waiting using forced prompt support (timeout 00:10:00) end: 2.4.5 expect-shell-connection (duration 00:00:00) [common] start: 2.4.6 overlay-unpack (timeout 00:18:37) [common] rm overlay-1.5.5.tar.gz root@h3ulcb:~# rm overlay-1.5.5.tar.gz rm overlay-1.5.5.tar.gz rm: cannot remove 'overlay-1.5.5.tar.gz': No such file or directory wget http://192.168.66.1/tmp/32190/compress-overlay-oyrrr7cw/overlay-1.5.5.tar.gz root@h3ulcb:~# wget http://192.168.66.1/tmp/32190/compress-overlay-oyrrr7cw/overlay-1.5.5.tar.gz wget http://192.168.66.1/tmp/32190/compress-overlay-oyrrr7cw/overllay-1.5.5.tar.gz Connecting to 192.168.66.1 (192.168.66.1:80) saving to 'overlay-1.5.5.tar.gz' overlay-1.5.5.tar.gz 100% |********************************| 7698 0:00:00 ETA 'overlay-1.5.5.tar.gz' saved tar -C / -xvpf overlay-1.5.5.tar.gz root@h3ulcb:~# tar -C / -xvpf overlay-1.5.5.tar.gz tar -C / -xvpf overlay-1.5.5.tar.gz x lava-32190/ x lava-32190/0/ x lava-32190/0/lava-test-runner.conf x lava-32190/0/tests/ x lava-32190/0/tests/0_check_disk_space/ x lava-32190/0/tests/0_check_disk_space/README x lava-32190/0/tests/0_check_disk_space/check_space.sh x lava-32190/0/tests/0_check_disk_space/check_space.yaml x lava-32190/0/tests/0_check_disk_space/run.sh x lava-32190/0/tests/0_check_disk_space/testdef.yaml x lava-32190/0/tests/0_check_disk_space/testdef_metadata x lava-32190/0/tests/0_check_disk_space/uuid x lava-32190/bin/ x lava-32190/bin/lava-add-keys x lava-32190/bin/lava-add-sources x lava-32190/bin/lava-background-process-start x lava-32190/bin/lava-background-process-stop x lava-32190/bin/lava-common-functions x lava-32190/bin/lava-echo-ipv4 x lava-32190/bin/lava-install-packages x lava-32190/bin/lava-installed-packages x lava-32190/bin/lava-os-build x lava-32190/bin/lava-probe-channel x lava-32190/bin/lava-probe-ip x lava-32190/bin/lava-target-ip x lava-32190/bin/lava-target-mac x lava-32190/bin/lava-target-storage x lava-32190/bin/lava-test-case x lava-32190/bin/lava-test-event x lava-32190/bin/lava-test-feedback x lava-32190/bin/lava-test-raise x lava-32190/bin/lava-test-reference x lava-32190/bin/lava-test-runner x lava-32190/bin/lava-test-set x lava-32190/bin/lava-test-shell x lava-32190/environment x lava-32190/lava x lava-32190/lava.pub x lava-32190/results/ x lava-32190/tests/ end: 2.4.6 overlay-unpack (duration 00:00:01) [common] start: 2.4.7 export-device-env (timeout 00:18:36) [common] end: 2.4.7 export-device-env (duration 00:00:00) [common] end: 2.4 uboot-commands (duration 00:01:20) [common] end: 2 uboot-action (duration 00:01:24) [common] start: 3 lava-test-retry (timeout 00:15:00) [common] start: 3.1 lava-test-shell (timeout 00:15:00) [common] Using namespace: common # root@h3ulcb:~# # lava-test-shell: Wait for prompt ['root@h3ulcb:~', 'h3ulcb:~#', '/ #'] (timeout 00:15:00) # Using /lava-32190 export SHELL=/bin/sh root@h3ulcb:~# export SHELL=/bin/sh export SHELL=/bin/sh . /lava-32190/environment root@h3ulcb:~# . /lava-32190/environment . /lava-32190/environment /lava-32190/bin/lava-test-runner /lava-32190/0 root@h3ulcb:~# /lava-32190/bin/lava-test-runner /lava-32190/0 Test shell timeout: 900s (minimum of the action and connection timeout) /lava-32190/bin/lava-test-runner /lava-32190/0 + export TESTRUN_ID=0_check_disk_space + TESTRUN_ID=0_check_disk_space + cd /lava-32190/0/tests/0_check_disk_space ++ cat uuid + UUID=32190_1.5.4.1 + set +x <LAVA_SIGNAL_STARTRUN 0_check_disk_space 32190_1.5.4.1> + ./check_space.sh /lava-32190/0/tests/0_check_disk_space/run.sh: line 14: ./check_space.sh: Permission denied <LAVA_TEST_RUNNER EXIT> Received signal: <STARTRUN> 0_check_disk_space 32190_1.5.4.1 Starting test lava.0_check_disk_space (32190_1.5.4.1) Skipping test definition patterns. ok: lava_test_shell seems to have completed Marking unfinished test run as failed case: 0_check_disk_space
case_id: 3885661
commit_id: ee27508d0deaa1021c9b76f4a6ed8858c1bed50a
definition: lava
duration: 0.00
result: fail
uuid: 32190_1.5.4.1
end: 3.1 lava-test-shell (duration 00:00:01) [common] end: 3 lava-test-retry (duration 00:00:01) [common] start: 4 finalize (timeout 00:30:00) [common] start: 4.1 power-off (timeout 00:00:10) [common] Calling: 'nice' '/usr/local/bin/acme-cli' '-s' '192.168.66.2' 'switch_off' '8' >> Success Returned 0 in 3 seconds end: 4.1 power-off (duration 00:00:04) [common] case: power-off
case_id: 3885662
definition: lava
duration: 3.71
extra: ...
level: 4.1
namespace: common
result: pass
start: 4.2 read-feedback (timeout 00:29:56) [common] Listened to connection for namespace 'common' for up to 1s Finalising connection for namespace 'common' Disconnecting from shell: Finalise root@h3ulcb:~# end: 4.2 read-feedback (duration 00:00:01) [common] lava-xnbd cleanup clean NBD port 61996 end: 4 finalize (duration 00:00:08) [common] Cleaning after the job Cleaning up download directory: /var/lib/lava/dispatcher/tmp/32190/nbd-deploy-kl9yqp4j/initrd Cleaning up download directory: /var/lib/lava/dispatcher/tmp/32190/nbd-deploy-kl9yqp4j/kernel Cleaning up download directory: /var/lib/lava/dispatcher/tmp/32190/nbd-deploy-kl9yqp4j/dtb Cleaning up download directory: /var/lib/lava/dispatcher/tmp/32190/nbd-deploy-kl9yqp4j/nbdroot Override tmp directory removed at /var/lib/lava/dispatcher/tmp/32190 Root tmp directory removed at /var/lib/lava/dispatcher/tmp/32190 Job finished correctly case: job
case_id: 3885663
definition: lava
result: pass