lava-dispatcher, installed at version: 2023.10 start: 0 validate Start time: 2024-09-10 18:09:12.691889+00:00 (UTC) Validating that http://download.automotivelinux.org/AGL/upload/ci/30282/1/raspberrypi4/initramfs-netboot-image-raspberrypi4-64.ext4.gz exists Validating that http://download.automotivelinux.org/AGL/upload/ci/30282/1/raspberrypi4/Image exists Validating that http://download.automotivelinux.org/AGL/upload/ci/30282/1/raspberrypi4/bcm2711-rpi-4-b+vc4.dtb exists Validating that http://download.automotivelinux.org/AGL/upload/ci/30282/1/raspberrypi4/agl-ivi-demo-qt-raspberrypi4-64.ext4.xz exists validate duration: 0.90 case: validate
case_id: 4045866
definition: lava
result: pass
start: 1 nbd-deploy (timeout 01:30:00) [common] Making protocol call for nbd-deploy using lava-xnbd [nbd-deploy] Checking protocol data for lava-xnbd Get a port from pool Set_port 61987 start: 1.1 download-retry (timeout 01:30:00) [common] start: 1.1.1 http-download (timeout 01:30:00) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/30282/1/raspberrypi4/initramfs-netboot-image-raspberrypi4-64.ext4.gz saving as /var/lib/lava/dispatcher/tmp/36404/nbd-deploy-sjfhr2f8/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz total size: 2153743 (2 MB) No compression specified progress 1 % (0 MB) progress 6 % (0 MB) progress 12 % (0 MB) progress 18 % (0 MB) progress 24 % (0 MB) progress 30 % (0 MB) progress 36 % (0 MB) progress 41 % (0 MB) progress 47 % (0 MB) progress 53 % (1 MB) progress 59 % (1 MB) progress 65 % (1 MB) progress 71 % (1 MB) progress 76 % (1 MB) progress 82 % (1 MB) progress 88 % (1 MB) progress 94 % (1 MB) progress 100 % (2 MB) 2 MB downloaded in 0.95 s (2.17 MB/s) end: 1.1.1 http-download (duration 00:00:01) [common] case: http-download
case_id: 4045989
definition: lava
duration: 0.95
extra: ...
level: 1.1.1
namespace: common
result: pass
end: 1.1 download-retry (duration 00:00:01) [common] start: 1.2 download-retry (timeout 01:29:59) [common] start: 1.2.1 http-download (timeout 01:29:59) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/30282/1/raspberrypi4/Image saving as /var/lib/lava/dispatcher/tmp/36404/nbd-deploy-sjfhr2f8/kernel/Image total size: 28535296 (27 MB) No compression specified progress 0 % (0 MB) progress 5 % (1 MB) progress 10 % (2 MB) progress 15 % (4 MB) progress 20 % (5 MB) progress 25 % (6 MB) progress 30 % (8 MB) progress 35 % (9 MB) progress 40 % (10 MB) progress 45 % (12 MB) progress 50 % (13 MB) progress 55 % (14 MB) progress 60 % (16 MB) progress 65 % (17 MB) progress 70 % (19 MB) progress 75 % (20 MB) progress 80 % (21 MB) progress 85 % (23 MB) progress 90 % (24 MB) progress 95 % (25 MB) progress 100 % (27 MB) 27 MB downloaded in 6.14 s (4.43 MB/s) end: 1.2.1 http-download (duration 00:00:06) [common] case: http-download
case_id: 4045989
definition: lava
duration: 6.15
extra: ...
level: 1.2.1
namespace: common
result: pass
end: 1.2 download-retry (duration 00:00:06) [common] start: 1.3 download-retry (timeout 01:29:53) [common] start: 1.3.1 http-download (timeout 01:29:53) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/30282/1/raspberrypi4/bcm2711-rpi-4-b+vc4.dtb saving as /var/lib/lava/dispatcher/tmp/36404/nbd-deploy-sjfhr2f8/dtb/bcm2711-rpi-4-b+vc4.dtb total size: 54759 (0 MB) No compression specified progress 59 % (0 MB) progress 100 % (0 MB) 0 MB downloaded in 0.42 s (0.13 MB/s) end: 1.3.1 http-download (duration 00:00:00) [common] case: http-download
case_id: 4045989
definition: lava
duration: 0.42
extra: ...
level: 1.3.1
namespace: common
result: pass
end: 1.3 download-retry (duration 00:00:00) [common] start: 1.4 download-retry (timeout 01:29:52) [common] start: 1.4.1 http-download (timeout 01:29:52) [common] downloading http://download.automotivelinux.org/AGL/upload/ci/30282/1/raspberrypi4/agl-ivi-demo-qt-raspberrypi4-64.ext4.xz saving as /var/lib/lava/dispatcher/tmp/36404/nbd-deploy-sjfhr2f8/nbdroot/agl-ivi-demo-qt-raspberrypi4-64.ext4 total size: 494363920 (471 MB) Using unxz to decompress xz progress 0 % (0 MB) progress 5 % (23 MB) progress 10 % (47 MB) progress 15 % (70 MB) progress 20 % (94 MB) progress 25 % (117 MB) progress 30 % (141 MB) progress 35 % (165 MB) progress 40 % (188 MB) progress 45 % (212 MB) progress 50 % (235 MB) progress 55 % (259 MB) progress 60 % (282 MB) progress 65 % (306 MB) progress 70 % (330 MB) progress 75 % (353 MB) progress 80 % (377 MB) progress 85 % (400 MB) progress 90 % (424 MB) progress 95 % (447 MB) progress 100 % (471 MB) 471 MB downloaded in 190.75 s (2.47 MB/s) end: 1.4.1 http-download (duration 00:03:11) [common] case: http-download
case_id: 4045989
definition: lava
duration: 190.76
extra: ...
level: 1.4.1
namespace: common
result: pass
end: 1.4 download-retry (duration 00:03:11) [common] start: 1.5 lava-overlay (timeout 01:26:42) [common] [common] Preparing overlay tarball in /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn makedir: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin makedir: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/tests makedir: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/results Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-add-keys Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-add-sources Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-background-process-start Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-background-process-stop Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-common-functions Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-echo-ipv4 Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-install-packages Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-installed-packages Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-os-build Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-probe-channel Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-probe-ip Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-target-ip Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-target-mac Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-target-storage Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-test-case Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-test-event Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-test-feedback Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-test-raise Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-test-reference Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-test-runner Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-test-set Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-test-shell Updating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-install-packages (oe) Updating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/bin/lava-installed-packages (oe) Creating /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/environment LAVA metadata - LAVA_JOB_ID=36404 - LAVA_DISPATCHER_IP=192.168.66.1 start: 1.5.1 ssh-authorize (timeout 01:26:42) [common] end: 1.5.1 ssh-authorize (duration 00:00:00) [common] start: 1.5.2 lava-vland-overlay (timeout 01:26:42) [common] skipped lava-vland-overlay end: 1.5.2 lava-vland-overlay (duration 00:00:00) [common] start: 1.5.3 lava-multinode-overlay (timeout 01:26:42) [common] skipped lava-multinode-overlay end: 1.5.3 lava-multinode-overlay (duration 00:00:00) [common] start: 1.5.4 test-definition (timeout 01:26:42) [common] Loading test definitions start: 1.5.4.1 git-repo-action (timeout 01:26:42) [common] Using /lava-36404 at stage 0 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/0/tests/0_network-veth' Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/0/tests/0_network-veth/test-suites/short-smoke/network-veth.yaml uuid=36404_1.5.4.1 testdef=None end: 1.5.4.1 git-repo-action (duration 00:00:01) [common] case: git-repo-action
case_id: 4046016
definition: lava
duration: 0.62
extra: ...
level: 1.5.4.1
namespace: common
result: pass
start: 1.5.4.2 test-overlay (timeout 01:26:41) [common] end: 1.5.4.2 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 4046017
definition: lava
duration: 0.00
extra: ...
level: 1.5.4.2
namespace: common
result: pass
start: 1.5.4.3 test-install-overlay (timeout 01:26:41) [common] end: 1.5.4.3 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 4046018
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.3
namespace: common
result: pass
start: 1.5.4.4 test-runscript-overlay (timeout 01:26:41) [common] runner path: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/0/tests/0_network-veth test_uuid 36404_1.5.4.1 end: 1.5.4.4 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 4046019
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.4
namespace: common
result: pass
start: 1.5.4.5 git-repo-action (timeout 01:26:41) [common] Using /lava-36404 at stage 1 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/1_ci-busybox' Removing '.git' directory in /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/1_ci-busybox Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/1_ci-busybox/test-suites/short-smoke/busybox.yaml uuid=36404_1.5.4.5 testdef={'testdef_pattern': {'pattern': '^(?P<test_case_id>[a-zA-Z0-9_-]+):\\s(?P<result>\\w+)', 'fixupdict': {'PASS': 'pass', 'FAIL': 'fail'}}} end: 1.5.4.5 git-repo-action (duration 00:00:01) [common] case: git-repo-action
case_id: 4046016
definition: lava
duration: 0.79
extra: ...
level: 1.5.4.5
namespace: common
result: pass
start: 1.5.4.6 test-overlay (timeout 01:26:40) [common] end: 1.5.4.6 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 4046017
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.6
namespace: common
result: pass
start: 1.5.4.7 test-install-overlay (timeout 01:26:40) [common] end: 1.5.4.7 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 4046018
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.7
namespace: common
result: pass
start: 1.5.4.8 test-runscript-overlay (timeout 01:26:40) [common] runner path: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/1_ci-busybox test_uuid 36404_1.5.4.5 end: 1.5.4.8 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 4046019
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.8
namespace: common
result: pass
start: 1.5.4.9 git-repo-action (timeout 01:26:40) [common] Using /lava-36404 at stage 1 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/2_ci-smoke-tests-basic' Removing '.git' directory in /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/2_ci-smoke-tests-basic Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/2_ci-smoke-tests-basic/test-suites/short-smoke/smoke-tests-basic.yaml uuid=36404_1.5.4.9 testdef=None end: 1.5.4.9 git-repo-action (duration 00:00:01) [common] case: git-repo-action
case_id: 4046016
definition: lava
duration: 0.90
extra: ...
level: 1.5.4.9
namespace: common
result: pass
start: 1.5.4.10 test-overlay (timeout 01:26:39) [common] end: 1.5.4.10 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 4046017
definition: lava
duration: 0.00
extra: ...
level: 1.5.4.10
namespace: common
result: pass
start: 1.5.4.11 test-install-overlay (timeout 01:26:39) [common] end: 1.5.4.11 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 4046018
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.11
namespace: common
result: pass
start: 1.5.4.12 test-runscript-overlay (timeout 01:26:39) [common] runner path: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/2_ci-smoke-tests-basic test_uuid 36404_1.5.4.9 end: 1.5.4.12 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 4046019
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.12
namespace: common
result: pass
start: 1.5.4.13 git-repo-action (timeout 01:26:39) [common] Using /lava-36404 at stage 1 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/3_ci-service-check' Removing '.git' directory in /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/3_ci-service-check Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/3_ci-service-check/test-suites/short-smoke/service-check.yaml uuid=36404_1.5.4.13 testdef=None end: 1.5.4.13 git-repo-action (duration 00:00:01) [common] case: git-repo-action
case_id: 4046016
definition: lava
duration: 0.74
extra: ...
level: 1.5.4.13
namespace: common
result: pass
start: 1.5.4.14 test-overlay (timeout 01:26:39) [common] end: 1.5.4.14 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 4046017
definition: lava
duration: 0.00
extra: ...
level: 1.5.4.14
namespace: common
result: pass
start: 1.5.4.15 test-install-overlay (timeout 01:26:38) [common] end: 1.5.4.15 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 4046018
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.15
namespace: common
result: pass
start: 1.5.4.16 test-runscript-overlay (timeout 01:26:38) [common] runner path: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1/tests/3_ci-service-check test_uuid 36404_1.5.4.13 BUILD_TAGS='' DEVICE_TAGS='' end: 1.5.4.16 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 4046019
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.16
namespace: common
result: pass
start: 1.5.4.17 git-repo-action (timeout 01:26:38) [common] Using /lava-36404 at stage 2 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/2/tests/4_screenshooter' Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/2/tests/4_screenshooter/test-suites/short-smoke/screenshooter.yaml uuid=36404_1.5.4.17 testdef=None end: 1.5.4.17 git-repo-action (duration 00:00:01) [common] case: git-repo-action
case_id: 4046016
definition: lava
duration: 0.72
extra: ...
level: 1.5.4.17
namespace: common
result: pass
start: 1.5.4.18 test-overlay (timeout 01:26:38) [common] end: 1.5.4.18 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 4046017
definition: lava
duration: 0.00
extra: ...
level: 1.5.4.18
namespace: common
result: pass
start: 1.5.4.19 test-install-overlay (timeout 01:26:38) [common] end: 1.5.4.19 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 4046018
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.19
namespace: common
result: pass
start: 1.5.4.20 test-runscript-overlay (timeout 01:26:38) [common] runner path: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/2/tests/4_screenshooter test_uuid 36404_1.5.4.17 end: 1.5.4.20 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 4046019
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.20
namespace: common
result: pass
start: 1.5.4.21 git-repo-action (timeout 01:26:38) [common] Using /lava-36404 at stage 3 Fetching tests from https://git.automotivelinux.org/src/qa-testdefinitions Running '/usr/bin/git clone --depth=1 https://git.automotivelinux.org/src/qa-testdefinitions /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/3/tests/5_ci-dumpjournal' Removing '.git' directory in /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/3/tests/5_ci-dumpjournal Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/3/tests/5_ci-dumpjournal/test-suites/short-smoke/dumpjournal.yaml uuid=36404_1.5.4.21 testdef={'testdef_pattern': {'pattern': '^(?P<test_case_id>[a-zA-Z0-9_-]+):\\s(?P<result>\\w+)', 'fixupdict': {'PASS': 'pass', 'FAIL': 'fail'}}} end: 1.5.4.21 git-repo-action (duration 00:00:01) [common] case: git-repo-action
case_id: 4046016
definition: lava
duration: 0.63
extra: ...
level: 1.5.4.21
namespace: common
result: pass
start: 1.5.4.22 test-overlay (timeout 01:26:37) [common] end: 1.5.4.22 test-overlay (duration 00:00:00) [common] case: test-overlay
case_id: 4046017
definition: lava
duration: 0.00
extra: ...
level: 1.5.4.22
namespace: common
result: pass
start: 1.5.4.23 test-install-overlay (timeout 01:26:37) [common] end: 1.5.4.23 test-install-overlay (duration 00:00:00) [common] case: test-install-overlay
case_id: 4046018
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.23
namespace: common
result: pass
start: 1.5.4.24 test-runscript-overlay (timeout 01:26:37) [common] runner path: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/3/tests/5_ci-dumpjournal test_uuid 36404_1.5.4.21 end: 1.5.4.24 test-runscript-overlay (duration 00:00:00) [common] case: test-runscript-overlay
case_id: 4046019
definition: lava
duration: 0.01
extra: ...
level: 1.5.4.24
namespace: common
result: pass
Creating lava-test-runner.conf files Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/0 for stage 0 - 0_network-veth Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/1 for stage 1 - 1_ci-busybox - 2_ci-smoke-tests-basic - 3_ci-service-check Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/2 for stage 2 - 4_screenshooter Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/36404/lava-overlay-8e1ji1dn/lava-36404/3 for stage 3 - 5_ci-dumpjournal end: 1.5.4 test-definition (duration 00:00:05) [common] start: 1.5.5 compress-overlay (timeout 01:26:37) [common] end: 1.5.5 compress-overlay (duration 00:00:01) [common] start: 1.5.6 persistent-nfs-overlay (timeout 01:26:36) [common] end: 1.5.6 persistent-nfs-overlay (duration 00:00:00) [common] end: 1.5 lava-overlay (duration 00:00:05) [common] start: 1.6 prepare-kernel (timeout 01:26:36) [common] start: 1.6.1 uboot-prepare-kernel (timeout 01:26:36) [common] end: 1.6.1 uboot-prepare-kernel (duration 00:00:00) [common] end: 1.6 prepare-kernel (duration 00:00:00) [common] start: 1.7 xnbd-server-deploy (timeout 01:26:36) [common] xnbd-server-deploy: starting nbd-server NBD-IP: 192.168.66.1, NBD-PORT: 61987, NBD-ROOT: 36404/nbd-deploy-sjfhr2f8/nbdroot/agl-ivi-demo-qt-raspberrypi4-64.ext4 nbd-server 61987 /var/lib/lava/dispatcher/tmp/36404/nbd-deploy-sjfhr2f8/nbdroot/agl-ivi-demo-qt-raspberrypi4-64.ext4 output: output: ** (process:10359): WARNING **: 18:12:37.267: Specifying an export on the command line no longer uses the oldstyle protocol. output: xnbd-server-deploy: starting nbd-server done end: 1.7 xnbd-server-deploy (duration 00:00:00) [common] end: 1 nbd-deploy (duration 00:03:24) [common] start: 2 uboot-action (timeout 00:20:00) [common] start: 2.1 uboot-from-media (timeout 00:20:00) [common] end: 2.1 uboot-from-media (duration 00:00:00) [common] start: 2.2 bootloader-overlay (timeout 00:20:00) [common] substitutions: - {BOOTX}: booti 0x00080000 0x02700000:${initrd_size} 0x02400000 - {DTB_ADDR}: 0x02400000 - {DTB}: 36404/nbd-deploy-sjfhr2f8/dtb/bcm2711-rpi-4-b+vc4.dtb - {INITRD}: 36404/nbd-deploy-sjfhr2f8/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz - {KERNEL_ADDR}: 0x00080000 - {KERNEL}: 36404/nbd-deploy-sjfhr2f8/kernel/Image - {LAVA_MAC}: None - {NBDSERVERIP}: 192.168.66.1 - {NBDSERVERPORT}: 61987 - {PRESEED_CONFIG}: None - {PRESEED_LOCAL}: None - {RAMDISK_ADDR}: 0x02700000 - {RAMDISK}: 36404/nbd-deploy-sjfhr2f8/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz - {ROOT_PART}: None - {ROOT}: None - {SERVER_IP}: 192.168.66.1 - {TEE_ADDR}: 0x83000000 - {TEE}: None Parsed boot commands: - setenv autoload no - setenv initrd_high 0xffffffff - setenv fdt_high 0xffffffff - dhcp - setenv serverip 192.168.66.1 - tftp 0x00080000 36404/nbd-deploy-sjfhr2f8/kernel/Image - tftp 0x02700000 36404/nbd-deploy-sjfhr2f8/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz - setenv initrd_size ${filesize} - tftp 0x02400000 36404/nbd-deploy-sjfhr2f8/dtb/bcm2711-rpi-4-b+vc4.dtb - setenv bootargs 'console=ttyS0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61987 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 coherent_pool=1M 8250.nr_uarts=1 rw fstab=no systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' - fdt addr 0x02400000; fdt boardsetup; fdt resize; fdt set audio status okay; booti 0x00080000 0x02700000:${initrd_size} 0x02400000 end: 2.2 bootloader-overlay (duration 00:00:00) [common] case: bootloader-overlay
case_id: 4046020
definition: lava
duration: 0.04
extra: ...
level: 2.2
namespace: common
result: pass
start: 2.3 connect-device (timeout 00:20:00) [common] [common] connect-device Connecting to device using 'telnet 127.0.0.1 63003' Setting prompt string to ['lava-test: # '] end: 2.3 connect-device (duration 00:00:04) [common] start: 2.4 uboot-commands (timeout 00:19:56) [common] start: 2.4.1 reset-device (timeout 00:19:56) [common] start: 2.4.1.1 pdu-reboot (timeout 00:19:56) [common] Calling: '/usr/local/bin/acme-cli' '-s' '192.168.66.2' 'reset' '7' >> Success >> Success Returned 0 in 5 seconds end: 2.4.1.1 pdu-reboot (duration 00:00:05) [common] case: pdu-reboot
case_id: 4046044
definition: lava
duration: 5.34
extra: ...
level: 2.4.1.1
namespace: common
result: pass
end: 2.4.1 reset-device (duration 00:00:05) [common] start: 2.4.2 bootloader-interrupt (timeout 00:19:51) [common] Setting prompt string to ['Hit any key to stop autoboot'] bootloader-interrupt: Wait for prompt ['Hit any key to stop autoboot'] (timeout 00:20:00) Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot 2020.07-00717-gfee68b98fe-dirty (Jul 17 2020 - 09:59:08 +0200) DRAM: 3.9 GiB RPI 4 Model B (0xc03111) MMC: emmc2@7e340000: 0, mmcnr@7e300000: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: genet@7d580000 starting USB... No working controllers found c end: 2.4.2 bootloader-interrupt (duration 00:00:07) [common] start: 2.4.3 bootloader-commands (timeout 00:19:44) [common] Setting prompt string to ['U-Boot>'] bootloader-commands: Wait for prompt ['U-Boot>'] (timeout 00:19:44) Hit any key to stop autoboot: 2  0 Setting prompt string to ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] setenv autoload no U-Boot> setenv autoload no bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:44) setenv autoload no setenv initrd_high 0xffffffff U-Boot> setenv initrd_high 0xffffffff bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:44) setenv initrd_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:44) setenv fdt_high 0xffffffff dhcp U-Boot> dhcp bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:44) dhcp genet@7d580000 Waiting for PHY auto negotiation to complete....... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.66.241 (1278 ms) setenv serverip 192.168.66.1 U-Boot> setenv serverip 192.168.66.1 bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:39) setenv serverip 192.168.66.1 tftp 0x00080000 36404/nbd-deploy-sjfhr2f8/kernel/Image U-Boot> tftp 0x00080000 36404/nbd-deploy-sjfhr2f8/kernel/Image bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:39) tftp 0x00080000 36404/nbd-deploy-sjfhr2f8/kernel/Image Using genet@7d580000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.241 Filename '36404/nbd-deploy-sjfhr2f8/kernel/Image'. Load address: 0x80000 Loading: *T ################################################## 27.2 MiB 759.8 KiB/s done Bytes transferred = 28535296 (1b36a00 hex) tftp 0x02700000 36404/nbd-deploy-sjfhr2f8/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz U-Boot> tftp 0x02700000 36404/nbd-deploy-sjfhr2f8/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:02) tftp 0x02700000 36404/nbd-deploy-sjfhr2f8/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz Using genet@7d580000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.241 Filename '36404/nbd-deploy-sjfhr2f8/initrd/initramfs-netboot-image-raspberrypi4-64.ext4.gz'. Load address: 0x2700000 Loading: *################################################## 2.1 MiB 2.7 MiB/s done Bytes transferred = 2153743 (20dd0f hex) setenv initrd_size ${filesize} U-Boot> setenv initrd_size ${filesize} bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:01) setenv initrd_size ${filesize} tftp 0x02400000 36404/nbd-deploy-sjfhr2f8/dtb/bcm2711-rpi-4-b+vc4.dtb U-Boot> tftp 0x02400000 36404/nbd-deploy-sjfhr2f8/dtb/bcm2711-rpi-4-b+vc4.dtb bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:01) tftp 0x02400000 36404/nbd-deploy-sjfhr2f8/dtb/bcm2711-rpi-4-b+vc4.dtb Using genet@7d580000 device TFTP from server 192.168.66.1; our IP address is 192.168.66.241 Filename '36404/nbd-deploy-sjfhr2f8/dtb/bcm2711-rpi-4-b+vc4.dtb'. Load address: 0x2400000 Loading: *################################################## 53.5 KiB 2.2 MiB/s done Bytes transferred = 54759 (d5e7 hex) setenv bootargs 'console=ttyS0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61987 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 coherent_pool=1M 8250.nr_uarts=1 rw fstab=no systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' U-Boot> setenv bootargs 'console=ttyS0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61987 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 coherent_pool=1M 8250.nr_uarts=1 rw fstab=no systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' bootloader-commands: Wait for prompt ['U-Boot>', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:01) setenv bootargs 'console=ttyS0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61987 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 coherent_pool=1M 8250.nr_uarts=1 rw fstab=no systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw' fdt addr 0x02400000; fdt boardsetup; fdt resize; fdt set audio status okay; booti 0x00080000 0x02700000:${initrd_size} 0x02400000 U-Boot> fdt addr 0x02400000; fdt boardsetup; fdt resize; fdt set audio status okay; booti 0x00080000 0x02700000:${initrd_size} 0x02400000 Setting prompt string to ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] bootloader-commands: Wait for prompt ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:19:01) fdt addr 0x02400000; fdt boardsetup; fdt resize; fdt set audio status okay; booti 0x00080000 0x02700000:${initrd_size} 0x02400000 libfdt fdt_path_offset() returned FDT_ERR_BADPATH ## Flattened Device Tree blob at 02400000 Booting using the fdt blob at 0x2400000 Loading Ramdisk to 3ad3b000, end 3af48d0f ... OK Loading Device Tree to 000000003ad2a000, end 000000003ad3afff ... OK Starting kernel ... end: 2.4.3 bootloader-commands (duration 00:00:44) [common] start: 2.4.4 auto-login-action (timeout 00:19:00) [common] Setting prompt string to ['Linux version [0-9]'] Setting prompt string to ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] auto-login-action: Wait for prompt ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image'] (timeout 00:20:00) [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.6.22-v8 (oe-user@oe-host) (aarch64-agl-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240716) #1 SMP PREEMPT Mon Sep 9 19:01:53 UTC 2024 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Raspberry Pi 4 Model B [ 0.000000] efi: UEFI not found. start: 2.4.4.1 login-action (timeout 00:18:58) [common] The string '/ #' does not look like a typical prompt and could match status messages instead. Please check the job log files and use a prompt string which matches the actual prompt string more closely. Setting prompt string to [] Setting prompt string to ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing'] Using line separator: #'\n'# Waiting for the login prompt Parsing kernel messages ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing', 'root@raspberrypi4-64:~', 'raspberrypi4-64:~#', '/ #', 'login:', 'Login incorrect'] [login-action] Waiting for messages, (timeout 00:18:58) [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000010400000, size 508 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000010400000..0x000000002fffffff (520192 KiB) map reusable linux,cma [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges [ 0.000000] percpu: Embedded 31 pages/cpu s86632 r8192 d32152 u126976 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyS0,115200n8 rw nbd.server=192.168.66.1 nbd.port=61987 root=/dev/ram0 ramdisk_size=16384 rootdelay=7 coherent_pool=1M 8250.nr_uarts=1 rw fstab=no systemd.mask=systemd-network-generator.service ip=dhcp verbose earlyprintk systemd.log_color=false ${extraargs} rw [ 0.000000] Unknown kernel command line parameters \"verbose earlyprintk ${extraargs} fstab=no\", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x0000000036d2a000-0x000000003ad2a000] (64MB) [ 0.000000] Memory: 3352824K/4050944K available (15104K kernel code, 2266K rwdata, 4992K rodata, 5376K init, 1117K bss, 177928K reserved, 520192K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 49049 entries in 192 pages [ 0.000000] ftrace: allocated 192 pages with 2 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000331] Console: colour dummy device 80x25 [ 0.000381] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000399] pid_max: default: 32768 minimum: 301 [ 0.000476] LSM: initializing lsm=capability,integrity [ 0.000680] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000725] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001619] cgroup: Disabling memory control group subsystem [ 0.003282] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.003393] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.003516] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.003784] rcu: Hierarchical SRCU implementation. [ 0.003790] rcu: Max phase no-delay instances is 1000. [ 0.005688] EFI services will not be available. [ 0.006033] smp: Bringing up secondary CPUs ... [ 0.006676] Detected PIPT I-cache on CPU1 [ 0.006791] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.007502] Detected PIPT I-cache on CPU2 [ 0.007589] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.008330] Detected PIPT I-cache on CPU3 [ 0.008424] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.008524] smp: Brought up 1 node, 4 CPUs [ 0.008535] SMP: Total of 4 processors activated. [ 0.008542] CPU features: detected: 32-bit EL0 Support [ 0.008547] CPU features: detected: 32-bit EL1 Support [ 0.008555] CPU features: detected: CRC32 instructions [ 0.008657] CPU: All CPU(s) started at EL2 [ 0.008685] alternatives: applying system-wide alternatives [ 0.010991] devtmpfs: initialized [ 0.020651] Enabled cp15_barrier support [ 0.020677] Enabled setend support [ 0.020978] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.020998] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.033062] pinctrl core: initialized pinctrl subsystem [ 0.033571] DMI not present or invalid. [ 0.034309] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.036205] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.036461] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.036876] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.036937] audit: initializing netlink subsys (disabled) [ 0.037120] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1 [ 0.037633] thermal_sys: Registered thermal governor 'step_wise' [ 0.037684] cpuidle: using governor menu [ 0.037930] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.038037] ASID allocator initialised with 65536 entries [ 0.038957] Serial: AMBA PL011 UART driver [ 0.045557] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.056156] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-01-22T17:23:15, variant start [ 0.060153] raspberrypi-firmware soc:firmware: Firmware hash is acb03c7d18aa08f25f6419d696d0cc39761d3e62 [ 0.070120] Modules: 25504 pages in range for non-PLT usage [ 0.070130] Modules: 517024 pages in range for PLT usage [ 0.076440] bcm2835-dma fe007000.dma-controller: DMA legacy API manager, dmachans=0x1 [ 0.078158] iommu: Default domain type: Translated [ 0.078167] iommu: DMA domain TLB invalidation policy: strict mode [ 0.078510] SCSI subsystem initialized [ 0.078675] usbcore: registered new interface driver usbfs [ 0.078710] usbcore: registered new interface driver hub [ 0.078754] usbcore: registered new device driver usb [ 0.080458] pps_core: LinuxPPS API ver. 1 registered [ 0.080466] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.080484] PTP clock support registered [ 0.080757] Advanced Linux Sound Architecture Driver Initialized. [ 0.081650] vgaarb: loaded [ 0.082105] clocksource: Switched to clocksource arch_sys_counter [ 1.102009] VFS: Disk quotas dquot_6.6.0 [ 1.102059] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.102241] FS-Cache: Loaded [ 1.102518] CacheFiles: Loaded [ 1.110972] NET: Registered PF_INET protocol family [ 1.111381] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.116136] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.116188] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.116207] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.116389] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 1.117480] TCP: Hash tables configured (established 32768 bind 32768) [ 1.117816] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 1.118020] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.118074] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.118391] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.119021] RPC: Registered named UNIX socket transport module. [ 1.119031] RPC: Registered udp transport module. [ 1.119037] RPC: Registered tcp transport module. [ 1.119042] RPC: Registered tcp-with-tls transport module. [ 1.119047] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.119064] PCI: CLS 0 bytes, default 64 [ 1.119498] Trying to unpack rootfs image as initramfs... [ 1.119859] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 1.122487] kvm [1]: IPA Size Limit: 44 bits [ 1.123964] kvm [1]: vgic interrupt IRQ9 [ 1.124032] kvm [1]: Hyp mode initialized successfully [ 1.124846] Freeing initrd memory: 2100K [ 1.126139] Initialise system trusted keyrings [ 1.126445] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.126503] zbud: loaded [ 1.127208] NFS: Registering the id_resolver key type [ 1.127246] Key type id_resolver registered [ 1.127252] Key type id_legacy registered [ 1.127276] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.127284] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.127986] NET: Registered PF_ALG protocol family [ 1.127999] Key type asymmetric registered [ 1.128006] Asymmetric key parser 'x509' registered [ 1.128058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.128219] io scheduler mq-deadline registered [ 1.128228] io scheduler kyber registered [ 1.128266] io scheduler bfq registered [ 1.129036] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 23) [ 1.133542] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.133572] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.133611] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.133646] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000 [ 1.134630] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.134645] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.134659] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.134702] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.134787] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.138204] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.138349] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator [ 1.138473] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator [ 1.138543] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator [ 1.248181] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.248235] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.248272] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.248401] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.248766] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.248798] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.248814] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.248838] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.248849] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.249084] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 1.249218] pcieport 0000:00:00.0: PME: Signaling with IRQ 27 [ 1.249499] pcieport 0000:00:00.0: AER: enabled with IRQ 27 [ 1.253509] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 1.255484] iproc-rng200 fe104000.rng: hwrng registered [ 1.255719] vc-mem: phys_addr:0x00000000 mem_base=0x00000000 mem_size:0x00000000(0 MiB) [ 1.255908] random: crng init done [ 1.260550] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 1.260570] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 1.260912] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 1.271057] brd: module loaded [ 1.277028] loop: module loaded [ 1.297686] Loading iSCSI transport class v2.0-870. [ 1.301545] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.498177] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.499132] usbcore: registered new device driver r8152-cfgselector [ 1.499167] usbcore: registered new interface driver r8152 [ 1.499212] usbcore: registered new interface driver lan78xx [ 1.500522] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002) [ 1.500578] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.500603] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.502265] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0700240000000890 [ 1.502779] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.502796] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.502811] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.503018] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 1.503032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.503042] usb usb1: Product: xHCI Host Controller [ 1.503050] usb usb1: Manufacturer: Linux 6.6.22-v8 xhci-hcd [ 1.503058] usb usb1: SerialNumber: 0000:01:00.0 [ 1.503606] hub 1-0:1.0: USB hub found [ 1.503650] hub 1-0:1.0: 1 port detected [ 1.504214] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 1.504229] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.504239] usb usb2: Product: xHCI Host Controller [ 1.504247] usb usb2: Manufacturer: Linux 6.6.22-v8 xhci-hcd [ 1.504255] usb usb2: SerialNumber: 0000:01:00.0 [ 1.504720] hub 2-0:1.0: USB hub found [ 1.504762] hub 2-0:1.0: 4 ports detected [ 1.505649] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.506387] usbcore: registered new interface driver uas [ 1.506441] usbcore: registered new interface driver usb-storage [ 1.506526] usbcore: registered new interface driver usbserial_generic [ 1.506553] usbserial: USB Serial support registered for generic [ 1.506588] usbcore: registered new interface driver cp210x [ 1.506614] usbserial: USB Serial support registered for cp210x [ 1.507054] mousedev: PS/2 mouse device common for all mice [ 1.507548] usbcore: registered new interface driver i2c-tiny-usb [ 1.510660] sdhci: Secure Digital Host Controller Interface driver [ 1.510672] sdhci: Copyright(c) Pierre Ossman [ 1.510888] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.514631] ledtrig-cpu: registered to indicate activity on CPUs [ 1.514784] hid: raw HID events driver (C) Jiri Kosina [ 1.514916] usbcore: registered new interface driver usbhid [ 1.514921] usbhid: USB HID core driver [ 1.518362] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 1.518753] usbcore: registered new interface driver snd-usb-audio [ 1.519190] NET: Registered PF_PACKET protocol family [ 1.519244] Key type dns_resolver registered [ 1.531091] registered taskstats version 1 [ 1.531202] Loading compiled-in X.509 certificates [ 1.534883] Key type .fscrypt registered [ 1.534890] Key type fscrypt-provisioning registered [ 1.538318] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.538566] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.538746] fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 37, base_baud = 0) is a PL011 rev2 [ 1.538856] serial serial0: tty port ttyAMA1 registered [ 1.539885] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [ 1.540139] printk: console [ttyS0] disabled [ 1.540337] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 38, base_baud = 62500000) is a 16550 [ 1.540366] printk: console [ttyS0] enabled [ 3.097048] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 3.105639] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 3.112668] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 3.119074] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 3.125645] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.133375] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 3.139474] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 3.172940] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 3.181556] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 3.188588] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 3.195585] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 3.204173] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 3.211173] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 3.217828] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 3.217831] of_cfs_init [ 3.219314] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 3.225095] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 3.227543] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 3.230154] of_cfs_init: OK [ 3.253867] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 3.261805] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 3.270976] bcmgenet fd580000.ethernet eth0: Link is Down [ 3.283868] mmc1: new high speed SDIO card at address 0001 [ 3.347868] mmc0: new ultra high speed DDR50 SDHC card at address 59b4 [ 3.354922] mmcblk0: mmc0:59b4 USDU1 7.51 GiB [ 3.360866] mmcblk0: p1 p2 [ 3.363947] mmcblk0: mmc0:59b4 USDU1 7.51 GiB [ 3.369416] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 3.378006] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 3.385040] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 3.411274] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 3.419603] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.426860] usb 1-1: Product: USB2.0 Hub [ 3.431853] hub 1-1:1.0: USB hub found [ 3.435823] hub 1-1:1.0: 4 ports detected [ 3.448197] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 3.456820] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 3.465199] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 3.734129] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd [ 3.839620] usb 1-1.3: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 3.848121] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.855556] usb 1-1.3: Product: USB2.0 Hub [ 3.860869] usb 1-1.3: Manufacturer: VIA Labs, Inc. [ 3.868004] hub 1-1.3:1.0: USB hub found [ 3.872213] hub 1-1.3:1.0: 4 ports detected [ 3.885969] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 3.894583] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 3.901717] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 4.182133] usb 1-1.3.1: new high-speed USB device number 4 using xhci_hcd [ 4.303811] usb 1-1.3.1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 4.312491] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.320098] usb 1-1.3.1: Product: USB2.0 Hub [ 4.325589] usb 1-1.3.1: Manufacturer: VIA Labs, Inc. [ 4.332949] hub 1-1.3.1:1.0: USB hub found [ 4.337285] hub 1-1.3.1:1.0: 4 ports detected [ 4.351529] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 4.360162] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 4.367351] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 4.646128] usb 1-1.3.1.1: new high-speed USB device number 5 using xhci_hcd [ 4.777658] usb 1-1.3.1.1: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ 4.786514] usb 1-1.3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.794297] usb 1-1.3.1.1: Product: RTL2838UHIDIR [ 4.799086] usb 1-1.3.1.1: Manufacturer: Realtek [ 4.803782] usb 1-1.3.1.1: SerialNumber: 00000001 [ 4.818840] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 4.827439] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 4.834566] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 7.358475] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 7.382120] Sending DHCP requests ., OK [ 7.402049] IP-Config: Got DHCP answer from 192.168.66.1, my address is 192.168.66.241 [ 7.410138] IP-Config: Complete: [ 7.413411] device=eth0, hwaddr=dc:a6:32:54:fa:25, ipaddr=192.168.66.241, mask=255.255.255.0, gw=192.168.66.1 [ 7.423939] host=192.168.66.241, domain=, nis-domain=(none) [ 7.430046] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= [ 7.430055] nameserver0=10.1.1.1 [ 7.441161] clk: Disabling unused clocks [ 7.445366] ALSA device list: [ 7.448385] No soundcards found. [ 7.452005] Waiting 7 sec before mounting root device... [ 14.558236] RAMDISK: gzip image found at block 0 [ 14.708552] EXT4-fs (ram0): mounted filesystem e54d48b0-adc6-40b9-bbf4-70ce3d2c72b9 r/w with ordered data mode. Quota mode: none. [ 14.720481] VFS: Mounted root (ext4 filesystem) on device 1:0. [ 14.726482] devtmpfs: mounted [ 14.734796] Freeing unused kernel memory: 5376K [ 14.746215] Run /sbin/init as init process ________________________________________________________________________________ ___ ________ _ __ __ __ __ / | / ____/ / / | / /__ / /_/ /_ ____ ____ / /_ / /| |/ / __/ / ______ / |/ / _ \/ __/ __ \/ __ \/ __ \/ __/ / ___ / /_/ / /___ /_____/ / /| / __/ /_/ /_/ / /_/ / /_/ / /_ /_/ |_\____/_____/ /_/ |_/\___/\__/_.___/\____/\____/\__/ ________________________________________________________________________________ /sbin/init[1]: starting initrd script /sbin/init[1]: mounting FS: proc /proc /sbin/init[1]: mounting FS: sysfs /sys /sbin/init[1]: mounting FS: devtmpfs /dev /sbin/init[1]: /dev (devtmpfs) already mounted /sbin/init[1]: mounting FS: devpts /dev/pts /sbin/init[1]: mounting FS: tmpfs /dev/shm /sbin/init[1]: mounting FS: tmpfs /tmp /sbin/init[1]: mounting FS: tmpfs /run /sbin/init[1][ 14.842837] nbd0: detected capacity change from 0 to 8962048 : NBD parameters: device /dev/nbd0, server 192.168.66.1:61987 /sbin/init[1]: Starting NBD client /sbin/init[1]: NBD client successfully started [ 15.201532] EXT4-fs (nbd0): mounted filesystem df5857ce-4192-454c-8bc5-015261391ec8 r/w with ordered data mode. Quota mode: none. /sbin/init[1]: Moving /dev to new rootfs /sbin/init[1]: Moving /proc to new rootfs /sbin/init[1]: Moving /sys to new rootfs /sbin/init[1]: Moving /tmp to new rootfs /sbin/init[1]: Moving /run to new rootfs /sbin/init[1]: Switching to new rootfs /sbin/init[1]: find_active_interface: first active interface is eth0 /sbin/init[1]: Adjusting Connman command line. Will be: 'connmand -r -n -I eth0,enp2s0,enp3s0,end0,enp0s2,enp0s1 ' /sbin/init[1]: Unmounting /tmp and /run /sbin/init[1]: Exec'ing systemd ________________________________________________________________________________ ___ ________ ____ __ _ / | / ____/ / / __ )____ ____ / /_(_)___ ____ _ / /| |/ / __/ / / __ / __ \/ __ \/ __/ / __ \/ __ `/ / ___ / /_/ / /___ / /_/ / /_/ / /_/ / /_/ / / / / /_/ / _ _ _ /_/ |_\____/_____/ /_____/\____/\____/\__/_/_/ /_/\__, / (_) (_) (_) _____________________________________________________/____/_____________________ [ 16.717255] systemd[1]: System time before build time, advancing clock. [ 16.937116] NET: Registered PF_INET6 protocol family [ 16.942922] Segment Routing with IPv6 [ 16.946683] In-situ OAM (IOAM) with IPv6 [ 17.084561] systemd[1]: systemd 255.4^ running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 17.116981] systemd[1]: Detected architecture arm64. Welcome to Automotive Grade Linux 18.0.1 (ricefish)! [ 17.148079] systemd[1]: Hostname set to <raspberrypi4-64>. [ 17.179582] systemd[1]: Initializing machine ID from random generator. [ 17.632498] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 17.641607] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 17.649954] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 17.658580] platform gpu: deferred probe pending [ 18.015722] systemd[1]: Queued start job for default target Graphical Interface. [ 18.072533] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 18.091332] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 18.111236] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 18.131495] systemd[1]: Created slice Slice /system/wireplumber. [ OK ] Created slice Slice /system/wireplumber. [ 18.151024] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 18.170511] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 18.194433] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 18.218277] systemd[1]: Expecting device /sys/devices/platform/gpu/graphics/fb0... Expecting device /sys/devices/platform/gpu/graphics/fb0... [ 18.242442] systemd[1]: Reached target Host and Network Name Lookups. [ OK ] Reached target Host and Network Name Lookups. [ 18.262254] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 18.278283] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 18.298228] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 18.314285] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 18.338877] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 18.358561] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 18.383370] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 18.402800] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 18.422864] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 18.442998] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 18.462992] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 18.482689] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 18.502737] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 18.522778] systemd[1]: Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 18.570350] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message [ 18.579111] systemd[1]: Mounting Kernel Debug File System... Queue File System... Mounting Kernel Debug F[ 18.604496] systemd[1]: Mounting Kernel Trace File System... ile System... Mounting Kernel Trace File Syst[ 18.625705] systemd[1]: Mounting Temporary Directory /tmp... em... Mounting Temporary Dire[ 18.648819] systemd[1]: Starting Create List of Static Device Nodes... ctory /tmp... Starting Create List of[ 18.668442] systemd[1]: Starting Load Kernel Module configfs... Static Device Nodes... Starting Load Kernel Mo[ 18.688614] systemd[1]: Starting Load Kernel Module drm... dule configfs... Starting Load Kernel Mo[ 18.712557] systemd[1]: Starting Load Kernel Module fuse... dule drm... Starting Load Kernel Mo[ 18.736447] systemd[1]: Starting SELinux autorelabel service loading... dule fuse... Starting SELinu[ 18.756228] systemd[1]: Starting SELinux init for /dev service loading... x autorelabel service loading... Starting SELinux init for /dev service loading... [ 18.782299] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met. [ 18.782696] fuse: init (API version 7.39) [ 18.798952] systemd[1]: Starting Journal Service... Starting Journal Service... [ 18.854192] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 18.876777] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 18.898443] systemd[1]: Bind mount volatile /var/cache was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/var/cache). [ 18.911685] systemd[1]: Bind mount volatile /var/lib was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/var/lib). [ 18.926994] systemd[1]: Starting Load/Save OS Random Seed... [ 18.926995] systemd-journald[200]: Collecting audit messages is enabled. Starting Load/Save OS Random Seed... [ 18.954329] systemd[1]: Bind mount volatile /var/spool was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/var/spool). [ 18.967530] systemd[1]: Bind mount volatile /srv was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/srv). [ 18.994350] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 19.005091] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 19.015869] systemd[1]: Started Journal Service. [ OK ] Started[ 19.027687] bcm2835_audio bcm2835_audio: card created with 8 channels Journal Service. [ 19.036174] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 19.044865] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 19.052201] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 19.054148] audit: type=1130 audit(1719930092.331:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Kernel Trace File System. [ OK ] Mounted Temporary Directory /tmp. [ OK ] Finished Create List of Static Device Nodes. [ 19.138316] audit: type=1130 audit(1719930092.419:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Finished Load Kernel Module configfs. [ 19.170560] audit: type=1130 audit(1719930092.451:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ 19.189749] audit: type=1131 audit(1719930092.451:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Finished Load Kernel Module drm. [ 19.222422] audit: type=1130 audit(1719930092.503:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ 19.241149] audit: type=1131 audit(1719930092.503:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Finished Load Kernel Module fuse. [ 19.274270] audit: type=1130 audit(1719930092.555:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ 19.293085] audit: type=1131 audit(1719930092.555:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Finished SELinux autorelabel service loading. [ 19.326305] audit: type=1130 audit(1719930092.607:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=selinux-autorelabel comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ 19.345733] audit: type=1131 audit(1719930092.607:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=selinux-autorelabel comm=\"systemd\" exe=\"/usr/lib/systemd/systemd\" hostname=? addr=? terminal=? res=success' [ OK ] Finished SELinux init for /dev service loading. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Load/Save OS Random Seed. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev gracefully.[ 19.530677] systemd-journald[200]: Received client request to flush runtime journal. .. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create Static Device Nodes in /dev gracefully. Starting Create System Users... Starting User Database Manager... [ OK ] Started User Database Manager. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting SELinux resolv.conf relabeling... Starting SELinux init service loading... Starting Generated file SELinux relabeling... Starting Create Volatile Files and Directories... Starting Rule-based Manager for Device Events and Files... [ OK ] Finished SELinux init service loading. [ OK ] Finished SELinux resolv.conf relabeling. [ OK ] Finished Create Volatile Files and Directories. Starting Load Audit Rules... Starting Rebuild Journal Catalog... [ OK ] Finished Load Audit Rules. [ OK ] Finished Rebuild Journal Catalog. [ OK ] Finished Generated file SELinux relabeling. Starting Security Audit Logging Service... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Started Security Audit Logging Service. Starting Record System Boot/Shutdown in UTMP... [ 21.465375] bcmgenet fd580000.ethernet end0: renamed from eth0 (while UP) [ OK ] Finished Record System Boot/Shutdown in UTMP. Starting Virtual Console Setup... [ 21.745799] mc: Linux media interface: v0.10 [ 21.855803] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 21.870277] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 21.879139] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 21.886885] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 21.917895] videodev: Linux video capture interface: v2.00 Starting SELinux resolv.conf relabeling... [ 22.044541] rpi-gpiomem fe200000.gpiomem: window base 0xfe200000 size 0x00001000 Starting SELinux autorelabel service loading... Starting SELinux init service loading... Starting SELinux init for /dev service loading... [ 22.107749] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 22.119937] rpi-gpiomem fe200000.gpiomem: initialised 1 regions as /dev/gpiomem [ 22.131324] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 22.137160] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 22.139604] [vc_sm_connected_init]: start [ 22.146363] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 22.150821] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 22.168263] [vc_sm_connected_init]: installed successfully [ 22.190221] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 [ 22.195251] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 22.199140] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 [ 22.214052] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) [ 22.214763] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 22.240063] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 22.264972] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 22.267021] Registered IR keymap rc-cec Startin[ 22.287802] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0 g Network Name Resolution... [ 22.302505] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 [ OK ] Finished SELinux resolv.conf relabeling. [ OK ] Finished SELinux autorelabel service loading. [ 22.355615] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/fef00700.hdmi/sound/card1/input1 [ OK ] Finished SELinux init service loading. [ 22.371328] rpivid feb10000.codec: Device registered as /dev/video19 [ 22.377434] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 22.378765] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops) [ 22.393870] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ OK ] Finished SELinux init for /dev service loading. [ 22.420311] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 22.438215] bcm2835-isp bcm2835-isp: bcm2835_isp_probe_instance: ril.isp returned 1 i/p (1 expected), 2 o/p (3 expected) ports [ 22.450389] bcm2835-isp bcm2835-isp: Unregister from media controller [ 22.458298] (efault): Unregistering node (null)[0] device node /dev/video0 [ 22.465483] (efault): Unregistering node (null)[0] device node /dev/video0 [ 22.472692] (efault): Unregistering node (null)[0] device node /dev/video0 [ 22.482384] (efault): Unregistering node (null)[0] device node /dev/video0 [ 22.489937] bcm2835-isp: probe of bcm2835-isp failed with error -22 [ 22.522605] Registered IR keymap rc-cec [ 22.540663] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 22.546251] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 22.554553] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input2 [ 22.555084] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 22.578062] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 22.586236] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 22.586675] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/fef05700.hdmi/sound/card2/input3 [ OK ] Finished Virtual Console Setup. [ 22.608818] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 22.610643] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops) [ 22.622208] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 22.626617] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops) [ 22.638220] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 22.638471] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops) [ 22.654157] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 22.658496] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops) [ 22.665501] Bluetooth: Core ver 2.22 [ 22.667022] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops) [ 22.670327] NET: Registered PF_BLUETOOTH protocol family [ 22.682267] Bluetooth: HCI device and connection manager initialized [ 22.682309] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops) [ 22.688782] Bluetooth: HCI socket layer initialized [ 22.700388] Bluetooth: L2CAP socket layer initialized [ 22.700727] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops) [ 22.705609] Bluetooth: SCO socket layer initialized [ 22.720279] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 22.728202] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 22.728595] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 22.803832] vc4-drm gpu: [drm] The core clock cannot reach frequencies high enough to support 4k @ 60Hz. [ 22.818147] vc4-drm gpu: [drm] Please change your config.txt file to add hdmi_enable_4kp60. Starting SELinux resolv.conf relabeling... [ 22.842226] Bluetooth: HCI UART driver ver 2.3 Starting SELinux autorelabel service loading... Starting SELinux init service loading... Starting SELinux init for /dev service loading... [ 22.971942] Bluetooth: HCI UART protocol H4 registered [ 22.971963] Bluetooth: HCI UART protocol BCSP registered [ 22.972082] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 22.972579] Bluetooth: HCI UART protocol Broadcom registered [ 22.973855] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 22.974083] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 23.015851] usb 1-1.3.1.1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ 23.025836] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.043245] Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 23.044187] Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 23.045110] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 23.046021] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 23.080711] usb 1-1.3.1.1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 23.080770] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ 23.080783] usb 1-1.3.1.1: media controller created [ 23.081863] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ 23.085162] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 23.085190] cfg80211: failed to load regulatory.db [ 23.098406] uart-pl011 fe201000.serial: no DMA platform data [ 23.249200] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 23.249898] usbcore: registered new interface driver brcmfmac [ 23.281290] i2c i2c-22: Added multiplexed i2c bus 23 [ 23.281310] rtl2832 22-0010: Realtek RTL2832 successfully attached [ 23.281365] usb 1-1.3.1.1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ 23.281395] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ 23.290312] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2 [ 23.458652] r820t 23-001a: creating new instance [ 23.465675] r820t 23-001a: Rafael Micro r820t successfully identified, chip type: R820T [ 23.492362] rtl2832_sdr rtl2832_sdr.2.auto: Registered as swradio0 [ 23.492381] rtl2832_sdr rtl2832_sdr.2.auto: Realtek RTL2832 SDR attached [ 23.492390] rtl2832_sdr rtl2832_sdr.2.auto: SDR API is still slightly experimental and functionality changes may follow [ 23.501405] Registered IR keymap rc-empty [ 23.501567] rc rc2: Realtek RTL2832U reference design as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1.1/rc/rc2 [ 23.502694] rc rc2: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter [ 23.502988] input: Realtek RTL2832U reference design as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1.1/rc/rc2/input4 [ 23.504281] usb 1-1.3.1.1: dvb_usb_v2: schedule remote query interval to 200 msecs [ 23.513573] usb 1-1.3.1.1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ 23.513810] usbcore: registered new interface driver dvb_usb_rtl28xxu [ 23.710056] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 23.710653] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 [ 24.482191] hwmon hwmon1: Undervoltage detected! [ 25.246133] Bluetooth: hci0: command 0xfc18 tx timeout [ 26.494185] hwmon hwmon1: Voltage normalised [ 32.990150] vc4-drm gpu: [drm] *ERROR* [CRTC:94:pixelvalve-2] flip_done timed out [ 33.246138] Bluetooth: hci0: BCM: failed to write update baudrate (-110) [ 33.246159] Bluetooth: hci0: Failed to set baudrate [ 35.262121] Bluetooth: hci0: command 0x0c03 tx timeout [ 43.230142] vc4-drm gpu: [drm] *ERROR* [CRTC:105:pixelvalve-4] flip_done timed out [ 43.486124] Bluetooth: hci0: BCM: Reset failed (-110) [ 53.470135] vc4-drm gpu: [drm] *ERROR* flip_done timed out [ 53.470153] vc4-drm gpu: [drm] *ERROR* [CRTC:94:pixelvalve-2] commit wait timed out [ 63.710126] vc4-drm gpu: [drm] *ERROR* flip_done timed out [ 63.710142] vc4-drm gpu: [drm] *ERROR* [CRTC:105:pixelvalve-4] commit wait timed out [ 73.950131] vc4-drm gpu: [drm] *ERROR* flip_done timed out [ 73.950150] vc4-drm gpu: [drm] *ERROR* [CONNECTOR:32:HDMI-A-1] commit wait timed out [ 79.394012] block nbd0: Receive control failed (result -32) [ 79.394204] block nbd0: shutting down sockets [ 79.426018] EXT4-fs (nbd0): shut down requested (2) [ 79.426039] Aborting journal on device nbd0-8. [ 79.426177] I/O error, dev nbd0, sector 4456448 op 0x1:(WRITE) flags 0x9800 phys_seg 1 prio class 2 [ 79.426193] Buffer I/O error on dev nbd0, logical block 557056, lost sync page write [ 79.426896] JBD2: I/O error when updating journal superblock for nbd0-8. [ 79.433917] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 79.434387] I/O error, dev nbd0, sector 348952 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 79.434568] I/O error, dev nbd0, sector 4881712 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 79.436305] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 79.441686] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 79.441847] I/O error, dev nbd0, sector 348952 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 79.441889] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 79.441970] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 79.442217] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 84.190135] vc4-drm gpu: [drm] *ERROR* flip_done timed out [ 84.190152] vc4-drm gpu: [drm] *ERROR* [CONNECTOR:41:HDMI-A-2] commit wait timed out [ 94.430129] vc4-drm gpu: [drm] *ERROR* flip_done timed out [ 94.430145] vc4-drm gpu: [drm] *ERROR* [PLANE:84:plane-3] commit wait timed out [ 104.670126] vc4-drm gpu: [drm] *ERROR* flip_done timed out [ 104.670139] vc4-drm gpu: [drm] *ERROR* [PLANE:95:plane-4] commit wait timed out [ 113.069568] blk_print_req_error: 12 callbacks suppressed [ 113.069580] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 113.070854] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 113.071998] I/O error, dev nbd0, sector 348952 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 113.072130] I/O error, dev nbd0, sector 4881712 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 113.072231] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 113.072391] I/O error, dev nbd0, sector 348952 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 113.072508] I/O error, dev nbd0, sector 4858496 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 113.123916] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 113.124188] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 113.124444] I/O error, dev nbd0, sector 348952 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 113.124799] EXT4-fs warning (device nbd0): dx_probe:822: inode #5588: lblock 0: comm systemd-userwor: error -5 reading directory block [ 113.125148] EXT4-fs warning (device nbd0): dx_probe:822: inode #5588: lblock 0: comm systemd-userwor: error -5 reading directory block [ 114.910139] vc4-drm gpu: [drm] *ERROR* flip_done timed out [ 114.910156] vc4-drm gpu: [drm] *ERROR* Timed out waiting for commit [ 125.150127] vc4-drm gpu: [drm] *ERROR* flip_done timed out [ 125.150142] vc4-drm gpu: [drm] *ERROR* Timed out waiting for commit [ 125.169817] Console: switching to colour frame buffer device 240x67 [ 125.908799] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ OK ] Finished SELinux resolv.conf relabeling. [ 125.926615] blk_print_req_error: 3 callbacks suppressed [ 125.926624] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 125.941502] I/O error, dev nbd0, sector 348952 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 125.950847] I/O error, dev nbd0, sector 348976 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 125.959874] I/O error, dev nbd0, sector 4881712 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 125.959877] EXT4-fs warning (device nbd0): dx_probe:822: inode #822: lblock 0: comm (eldev.sh): error -5 reading directory block [ OK ][ 125.980918] I/O error, dev nbd0, sector 260768 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 Started[ 125.990624] I/O error, dev nbd0, sector 348976 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 Network[ 126.000300] I/O error, dev nbd0, sector 348952 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 Name Re[ 126.000302] EXT4-fs warning (device nbd0): dx_probe:822: inode #822: lblock 0: comm (eldev.sh): error -5 reading directory block solution[ 126.009958] I/O error, dev nbd0, sector 348976 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 . [ 126.032204] I/O error, dev nbd0, sector 4858496 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 126.032210] EXT4-fs warning (device nbd0): dx_probe:822: inode #822: lblock 0: comm (-init.sh): error -5 reading directory block [ 126.053290] I/O error, dev nbd0, sector 348976 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 2 [ 126.062329] EXT4-fs warning (device nbd0): dx_probe:822: inode #822: lblock 0: comm (-init.sh): error -5 reading directory block [ OK ] Finished Rebuild Dynamic Linker Cache. [ OK ] Finished SELinux autorelabel service loading. [FAILED] Failed to start SELinux init service loading. See 'systemctl status selinux-init.service' for details. [FAILED] Failed to start SELinux init for /dev service loading. See 'systemctl status selinux-labeldev.service' for details. [ TIME ] Timed out waiting for device /sys/devices/platform/gpu/graphics/fb0. [DEPEND] Dependency failed for Start psplash boot splash screen. [DEPEND] Dependency failed for Start psplash…emd progress communication helper. [FAILED] Failed to start Load/Save RF Kill Switch Status. See 'systemctl status systemd-rfkill.service' for details. [FAILED] Failed to start Update is Completed. See 'systemctl status systemd-update-done.service' for details. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timer Units. [ 126.390581] EXT4-fs warning (device nbd0): dx_probe:822: inode #822: lblock 0: comm systemd: error -5 reading directory block [ OK ] Listening on agl-compositor, a Wayl…ositor, as a systemd user service. [ 126.418676] EXT4-fs warning (device nbd0): dx_probe:822: inode #68060: lblock 0: comm systemd: error -5 reading directory block [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ 126.446631] EXT4-fs warning (device nbd0): dx_probe:822: inode #822: lblock 0: comm systemd: error -5 reading directory block [ OK ] Listening on D-Bus System Message Bus Socket. [ 126.474673] EXT4-fs warning (device nbd0): dx_probe:822: inode #68060: lblock 0: comm systemd: error -5 reading directory block [ OK ] Listening on GPS (Global Positioning System) Daemon Sockets. [ 126.530790] EXT4-fs warning (device nbd0): dx_probe:822: inode #822: lblock 0: comm systemd: error -5 reading directory block [ OK ] Listening on mpd.socket. [ 126.562750] EXT4-fs warning (device nbd0): dx_probe:822: inode #822: lblock 0: comm systemd: error -5 reading directory block Starting PipeWire Multimedia System Manager Socket... Starting PipeWire Multimedia System Socket... [FAILED] Failed to listen on sshd.socket. See 'systemctl status sshd.socket' for details. [FAILED] Failed to listen on PipeWire Multimedia System Manager Socket. See 'systemctl status pipewire-manager.socket' for details. [FAILED] Failed to listen on PipeWire Multimedia System Socket. See 'systemctl status pipewire.socket' for details. [DEPEND] Dependency failed for PipeWire Multimedia Service. [DEPEND] Dependency failed for agl-service-audiomixer.service. [DEPEND] Dependency failed for Multimedia Service Session Manager (policy). [DEPEND] Dependency failed for Multimedia Service Session Manager (bluetooth). [DEPEND] Dependency failed for Multimedia Service Session Manager (audio). [DEPEND] Dependency failed for Multimedia Se…e Session Manager (video-capture). [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. [FAILED] Failed to start Save/Restore Sound Card State. See 'systemctl status alsa-restore.service' for details. [ OK ] Reached target Sound Card. [FAILED] Failed to start CAN interface helper. See 'systemctl status can-dev-helper.service' for details. [DEPEND] Dependency failed for Eclipse KUKSA.val DBC feeder. [FAILED] Failed to start D-Bus System Message Bus. See 'systemctl status dbus.service' for details. [FAILED] Failed to start Configure Bluetooth Modems connected by UART. See 'systemctl status hciuart.service' for details. [FAILED] Failed to start IPv6 Packet Filtering Framework. See 'systemctl status ip6tables.service' for details. [FAILED] Failed to start IPv4 Packet Filtering Framework. See 'systemctl status iptables.service' for details. [ OK ] Reached target Preparation for Network. [FAILED] Failed to start Connection service. See 'systemctl status connman.service' for details. [FAILED] Failed to start Telephony service. See 'systemctl status ofono.service' for details. [FAILED] Failed to start Authorization Manager. See 'systemctl status polkit.service' for details. [FAILED] Failed to start User Login Management. See 'systemctl status systemd-logind.service' for details. [FAILED] Failed to start Network Configuration. See 'systemctl status systemd-networkd.service' for details. Stopping Network Name Resolution... [FAILED] Failed to start Load/Save RF Kill Switch Status. See 'systemctl status systemd-rfkill.service' for details. [FAILED] Failed to start Disk Manager. See 'systemctl status udisks2.service' for details. [FAILED] Failed to start Automount Disk Manager. See 'systemctl status automount.service' for details. [FAILED] Failed to start OpenSSH Key Generation. See 'systemctl status sshdgenkeys.service' for details. [FAILED] Failed to start D-Bus System Message Bus. See 'systemctl status dbus.service' for details. [FAILED] Failed to start Connection service. See 'systemctl status connman.service' for details. [FAILED] Failed to start Load Kernel Module drm. See 'systemctl status [email protected]' for details. [FAILED] Failed to start User Login Management. See 'systemctl status systemd-logind.service' for details. [FAILED] Failed to start Network Configuration. See 'systemctl status systemd-networkd.service' for details. [FAILED] Failed to start Load/Save RF Kill Switch Status. See 'systemctl status systemd-rfkill.service' for details. [FAILED] Failed to start D-Bus System Message Bus. See 'systemctl status dbus.service' for details. [FAILED] Failed to start Connection service. See 'systemctl status connman.service' for details. [FAILED] Failed to start Load Kernel Module drm. See 'systemctl status [email protected]' for details. [FAILED] Failed to start User Login Management. See 'systemctl status systemd-logind.service' for details. [FAILED] Failed to start Network Configuration. See 'systemctl status systemd-networkd.service' for details. [FAILED] Failed to start Load/Save RF Kill Switch Status. See 'systemctl status systemd-rfkill.service' for details. [FAILED] Failed to start D-Bus System Message Bus. See 'systemctl status dbus.service' for details. [FAILED] Failed to start Connection service. See 'systemctl status connman.service' for details. [FAILED] Failed to start Load Kernel Module drm. See 'systemctl status [email protected]' for details. [FAILED] Failed to start User Login Management. See 'systemctl status systemd-logind.service' for details. [FAILED] Failed to start Network Configuration. See 'systemctl status systemd-networkd.service' for details. [FAILED] Failed to start Load/Save RF Kill Switch Status. See 'systemctl status systemd-rfkill.service' for details. [FAILED] Failed to start D-Bus System Message Bus. See 'systemctl status dbus.service' for details. [FAILED] Failed to start Connection service. See 'systemctl status connman.service' for details. [FAILED] Failed to start Load Kernel Module drm. See 'systemctl status [email protected]' for details. [FAILED] Failed to start User Login Management. See 'systemctl status systemd-logind.service' for details. [FAILED] Failed to start Network Configuration. See 'systemctl status systemd-networkd.service' for details. [FAILED] Failed to start Load/Save RF Kill Switch Status. See 'systemctl status systemd-rfkill.service' for details. [FAILED] Failed to start D-Bus System Message Bus. See 'systemctl status dbus.service' for details. [FAILED] Failed to start Connection service. See 'systemctl status connman.service' for details. [FAILED] Failed to start Load Kernel Module drm. See 'systemctl status [email protected]' for details. [FAILED] Failed to start User Login Management. See 'systemctl status systemd-logind.service' for details. [FAILED] Failed to start Network Configuration. See 'systemctl status systemd-networkd.service' for details. [ OK ] Stopped Network Name Resolution. [ OK ] Reached target Network. [FAILED] Failed to start agl-service-radio.service. See 'systemctl status agl-service-radio.service' for details. [FAILED] Failed to start applaunchd.service. See 'systemctl status applaunchd.service' for details. [DEPEND] Dependency failed for homescreen.service. [DEPEND] Dependency failed for launcher.service. [FAILED] Failed to start Avahi mDNS/DNS-SD Stack. See 'systemctl status avahi-daemon.service' for details. [FAILED] Failed to start Eclipse KUKSA.val databroker. See 'systemctl status kuksa-databroker.service' for details. [DEPEND] Dependency failed for agl-service-hvac.service. [FAILED] Failed to start agl-vss-helper.service. See 'systemctl status agl-vss-helper.service' for details. [FAILED] Failed to start Permit User Sessions. See 'systemctl status systemd-user-sessions.service' for details. [DEPEND] Dependency failed for AGL compositor. [FAILED] Failed to start Getty on tty1. See 'systemctl status [email protected]' for details. [FAILED] Failed to start Serial Getty on ttyS0. See 'systemctl status [email protected]' for details. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. [FAILED] Failed to start Record Runlevel Change in UTMP. See 'systemctl status systemd-update-utmp-runlevel.service' for details. login-action timed out after 1138 seconds end: 2.4.4.1 login-action (duration 00:18:58) [common] case: login-action
case_id: 4046323
definition: lava
duration: 1138.00
extra: ...
level: 2.4.4.1
namespace: common
result: fail
auto-login-action failed: 1 of 1 attempts. 'login-action timed out after 1138 seconds' login-action timed out after 1138 seconds end: 2.4.4 auto-login-action (duration 00:19:00) [common] case: auto-login-action
case_id: 4046324
definition: lava
duration: 1140.10
extra: ...
level: 2.4.4
namespace: common
result: fail
login-action timed out after 1138 seconds end: 2.4 uboot-commands (duration 00:19:56) [common] case: uboot-commands
case_id: 4046325
definition: lava
duration: 1196.11
extra: ...
level: 2.4
namespace: common
result: fail
uboot-action failed: 1 of 1 attempts. 'login-action timed out after 1138 seconds' login-action timed out after 1138 seconds end: 2 uboot-action (duration 00:20:00) [common] case: uboot-action
case_id: 4046326
definition: lava
duration: 1199.77
extra: ...
level: 2
namespace: common
result: fail
Cleaning after the job Cleaning up download directory: /var/lib/lava/dispatcher/tmp/36404/nbd-deploy-sjfhr2f8/initrd Cleaning up download directory: /var/lib/lava/dispatcher/tmp/36404/nbd-deploy-sjfhr2f8/kernel Cleaning up download directory: /var/lib/lava/dispatcher/tmp/36404/nbd-deploy-sjfhr2f8/dtb Cleaning up download directory: /var/lib/lava/dispatcher/tmp/36404/nbd-deploy-sjfhr2f8/nbdroot start: 7.1 power-off (timeout 00:00:10) [common] Calling: '/usr/local/bin/acme-cli' '-s' '192.168.66.2' 'switch_off' '7' >> Success Returned 0 in 3 seconds end: 7.1 power-off (duration 00:00:03) [common] case: power-off
case_id: 4046327
definition: lava
duration: 3.47
extra: ...
level: 7.1
namespace: common
result: pass
start: 7.2 read-feedback (timeout 00:29:57) [common] Listened to connection for namespace 'common' for up to 1s Finalising connection for namespace 'common' Disconnecting from shell: Finalise � end: 7.2 read-feedback (duration 00:00:01) [common] lava-xnbd cleanup clean NBD port 61987 Override tmp directory removed at /var/lib/lava/dispatcher/tmp/36404 Root tmp directory removed at /var/lib/lava/dispatcher/tmp/36404 JobError: Your job cannot terminate cleanly. case: job
case_id: 4046328
definition: lava
error_msg: login-action timed out after 1138 seconds
error_type: Job
result: fail